Pumps and tanks

The Sentinelle Contractor Series 300400 backup pump offers peace of mind as a complement to an electric sump pump. Operating without electricity or batteries, it uses municipal water pressure to minimize the risk of flooding. In case of a power failure or pump malfunction, the rising float activates an automatic valve to drain water from the sump. Made of brass for maximum durability, it pumps up to 1200 US GPH (4500 LPH) with a maximum head of 15 feet (4.5 m).

The submersible utility pump 300509PS is ideal for residential applications requiring water transfer, such as draining pools. Its electronic float activates the pump when the water level reaches 6.4 cm, and it continues pumping for an additional 30 seconds after reaching the low level. Made from non-corrosive thermoplastic, it is equipped with a 1/2 HP, 115 V, 60 Hz motor with thermal protection. It includes a 50-foot discharge hose and offers a maximum head of 25 feet (7.5 m) with a capacity of 4000 GPH (15140 LPH).

The submersible utility pump 300501 is ideal for draining basements, spas, small pools, and flat roofs. With a capacity of 1300 GPH (4925 LPH) and a maximum head of 20 feet (6 m), it transfers water down to 1/8 inch from the surface. Its non-corrosive thermoplastic housing and 1/6 HP, 115 V motor ensure durability and reliability. Easily connectable with a garden hose or a 1-1/4 NPT adapter, it is protected against overload. Do not operate this pump dry.

This 1/4 HP submersible utility pump is designed for small sumps, crawl spaces, and slow water infiltration, with a maximum flow rate of 1850 GPH. Its robust aluminum motor operates at 120V/60Hz and allows for discharge up to 24.6 feet with a maximum pressure of 0.75 bars. More compact and energy-efficient than higher-powered models, it is ideal for situations where a high flow rate is unnecessary. Its polypropylene housing and polyamide (nylon) impeller ensure excellent moisture and wear resistance. Certified IPX8, it is suitable for extended submersion without risk of damage.

This 1/2 HP submersible sump pump delivers powerful drainage for clear water with a maximum flow rate of 3300 GPH. Equipped with a robust aluminum motor, it operates at 120V/60Hz and allows for discharge up to 24.6 feet with a maximum pressure of 0.85 bars. Its floating switch automatically activates the pump according to the water level, ensuring high performance and reliability. The aluminum housing and polyamide (nylon) impeller provide optimal durability. Certified IPX8, it is designed for continuous submersion without risk of damage, making it ideal for basement and sump drainage.

This 1/3 HP submersible sump pump ensures efficient drainage of clear water with a maximum flow rate of 2900 GPH. Its aluminum motor operates at 120V/60Hz and allows for discharge up to 22.9 feet with a maximum pressure of 0.75 bars. Equipped with a floating switch, it activates automatically based on the water level, while its aluminum housing and polyamide (nylon) impeller ensure exceptional durability. Certified IPX8, it is designed for continuous submersion without risk of damage, delivering optimal performance for basement and sump drainage.

This 1/3 HP submersible sump pump ensures efficient drainage of clear water with a maximum flow rate of 2900 GPH. Its aluminum motor operates at 120V/60Hz and allows for discharge up to 22.9 feet with a maximum pressure of 0.75 bars. Equipped with a floating switch, it activates automatically based on the water level, while its aluminum housing and polyamide (nylon) impeller ensure exceptional durability. Certified IPX8, it is designed for continuous submersion without risk of damage, delivering optimal performance for basement and sump drainage.

This sump pump is essential in the event of flooding or power outages, as it takes over from the main pumping system. It features an automatic start-stop emergency function and a 1" discharge with an elbow, adaptable to a 1 1/2" DWV pipe. The 115 VAC to 12 VDC transformer and battery charger ensure continuous operation, and the housing can accommodate a marine battery (not included) measuring 32.4 cm L x 24.1 cm H x 18.4 cm D. Compatible with all brands of separate or common discharge systems.

This submersible sump pump is designed for permanent installation at home or on the farm. It can be used for light commercial application. This pump is designed for pumping water only.

This sump pump drainage kit is essential for effectively managing groundwater. It includes a 20-foot hose, a 1-1/4" and 1-1/2" adapter, and a stainless steel clamp. Perfect for basements and other flood-prone areas, this kit ensures quick and safe water evacuation. Easy to install, it is designed to fit most sump pump systems.

1/3HP zinc submersible sump pump with vertical float.

Ideal for automatic drainage of residential basement sump, this pump replaces pedestal and submersible pumps.

3/4 HP noryl jet pump.

3/4 HP noryl jet pump with 25-l tank.

The non-submersible condensate water pump 310100 is designed to work with air conditioners, water dispensers, or cooling systems. Made of ABS, this lightweight and compact pump is equipped with a 1 Amp, 115 V, 60Hz motor with double insulation and thermal protection. Its automatic overflow switch and 3/8-inch barbed discharge with a check valve ensure safe operation. It offers a capacity of 65 US GPH (250 LPH) and a maximum discharge head of 15 feet (4.5 m), ideal for various needs.

The submersible grinder sewage pump 400700Z is ideal for residential sewage applications. Made of durable cast iron, it features a 3/4 HP, 115 V motor, oil-cooled, with automatic thermal and overload protection. Its vertical float ensures automatic operation, perfect for new installations or replacing an existing pump. With a maximum head of 35 feet (10.5 m) and a capacity of up to 1875 GPH US (7100 LPH), this pump is designed to be reliable and long-lasting. It comes with an 8-foot (2.4 m) electrical cable.

The 506721 cast iron convertible jet pump is ideal for supplying potable water to homes, cottages, or farms. It can operate in shallow well mode up to 25 feet (7.5 m) or deep well mode up to 70 feet (21 m). Its 3/4 HP motor, with dual voltage 115V/230V, is overload protected and ensures a maximum pressure of 65 PSI. With a capacity of 820 GPH in shallow well mode and 685 GPH in deep well mode, this pump is also easy to prime and comes with an integrated pressure gauge.

The 300526 submersible effluent pump is ideal for residential installation. Equipped with a 1/2 HP, 115 V motor with built-in thermal and overload protection, it provides reliable performance. Its vertical float allows for easy installation in basins of 10 inches in diameter or larger, and it can handle solids up to 1/2 inch with its non-corrosive vortex impeller. With a durable cast iron housing and a maximum capacity of 4400 GPH (16600 LPH), it ensures efficient flow up to a height of 25 feet (7.5 m).

Plastic pump adapter.

Thermal and overload motor protection. Stainless steel motor shell. Equipped with piggy-back float switch (tether).Corrosion-resist ant thermoplastic pump base.

The piston pump repair kit allows you to do the necessary repairs for your pump.

This kit will allow you a quick and easy installation of a sump pump discharge hose.

Install this switch to protect the pump by interrupting the power supply when the water pressure drops below 10 psi.

This precision pressure gauge helps to ensure there are no leaks or pressure changing that could affect the operating condition of your water pump. Easy-to-read design.

This tank is designed to maintain the water pressure in a residential water pump system when the pump is not in operation.

This Pressure Gauge is a dependable and efficient way to monitor pressure in various systems, from residential setups to industrial applications. Its durable plastic housing and compact side-mount design allow for easy installation, even in tight spaces. The black dial enhances visibility for quick, accurate readings. With a 1/4-in NPT back connection and the ability to measure up to 100 PSI, this pressure gauge is a practical choice for long-term performance and reliability.

All-in-one multi connection tee connects line connection to pressure tank. 1/4" FPT connection for pressure switch and pressure gauge as well as 1/2" F...

This well point keeps the water-bearing formation in place. Features a 24" succion screen.

This pressure switch is used to turn the pump on at 30 PSI and turn it off at 50 PSI. It controls the water pressure with its simple mechanism that keeps the pressure below a specified setting. 1/4" BARB brass fitting.

This check valve is designed to work with sump pumps. Its dual-sized slip-fit side accommodates either 1 1/4" and 1 1/2" pump discharge threads. It prevents water backflow into the pump.

This captive air tank eliminates waterlogging and the use of air volume control.

This horizontal diaphragm tank provides water storage and water pressure for jet and deep well pumps.

This tank is designed to maintain the water pressure in a residential water pump system when the pump is not in operation.

This pitless adapter for deep submersible pumps allows for an easy pump service and prevents from having to dig up a horizontal run from casing to home.

This check valve prevents the backflow of water into the pump. Its lead-free brass construction can safely be used for potable water. Lead-free.

This snifter valve charges air in your tank and pump. Easy to install. Fits 1/4" MNPT.

This relief valve is designed to open when your pumping system raise up to a critical pressure level. It protects your pump system.

This lead-free brass foot valve allows the pump to hold prime and can safely be used for potable water.

This pressure switch is used to turn the pump on at 30 PSI and turn it off at 50 PSI. It controls the water pressure with its simple mechanism that keeps the pressure below a specified setting.

This foot valve allows the pump to hold prime and its PVC construction helps extend valve life. Its filtered-intake design prevents large debris from entering the suction pipe. 3/4" FNTP.

Use this universal vertical replacement fleet for your sump pump with a 10-foot cable.

This foot valve allows the pump to hold prime and its PVC construction helps extend valve life. Its filtered-intake design prevents large debris from entering the suction pipe.

This check valve is designed to work with sump pumps. It prevents the backflow of water into the pump.

This check valve prevents the backflow of water into the pump. Its lead-free brass construction can safely be used for potable water.

Get this set of four heat shrink splicing cables for your water system.

This well point keeps the water-bearing formation in place.

This precision pressure gauge helps to ensure there are no leaks or pressure changing that could affect the operating condition of your water pump.

This mechanical float switch detects the level of water for all kinds of submersible pumps.