Reduction and check valves

The Plumbeeze check valve for sump pumps and wastewater features a full-flow valve design. With a 100% opening and a 15-degree angle to reduce water hammer upon pump shutdown. This design also prevents debris buildup and blockage, ensuring optimal operation. Equipped with a reinforced nylon burst-proof seal, this check valve provides lasting tightness. An efficient solution that replaces BMR code (063-7789) and ensures peace of mind for your drainage systems.

The silent check valve 350380 is designed to fit 1-1/2” discharge pipes for sump pumps. It prevents water from flowing back into the basin after each pump cycle and reduces noise with its closing system that dampens water hammer. Its universal design allows it to be used with various pump brands. Made from durable plastic, it features rubber fittings and stainless steel clamps for better sealing.

This check valve is designed to work with sump pumps. Its dual-sized slip-fit side accommodates either 1 1/4" and 1 1/2" pump discharge threads. It prevents water backflow into the pump.

The lead-free check valve controls the direction of fluid flow (liquid, gas, compressed air, etc.). Can be used horizontally or vertically.

The 1" lead-free check valve controls the direction of fluid flow (liquid, gas, compressed air, etc.). Can be used horizontally or vertically.

The 3/4" lead-free check valve controls the direction of fluid flow (liquid, gas, compressed air, etc.). Can be used horizontally or vertically.

The check valve is easy to screw and is provided with a stainless steel spring.

This check valve prevents the backflow of water into the pump. Its lead-free brass construction can safely be used for potable water. Lead-free.

This check valve is designed to work with sump pumps. It prevents the backflow of water into the pump.

This check valve prevents the backflow of water into the pump. Its lead-free brass construction can safely be used for potable water.

This check valve is designed to work with sump pumps. Its dual-sized slip-fit side accommodates either 1 1/4" and 1 1/2" pump discharge threads.