Farm welding

Single flint striker replacement silex flints, BMR code 002-0207 (KH570). Pack of 6.

Used for igniting acetylene and propane torches. For replaceable flint see BMR code 002-0228 (KH571).

Tightly braided rayon lines for strength, neoprene base for oil and flame resistance.

Gun Tapered tips used in 0.035 in diameter wire welding applications.

Gun Tapered tips used in 0.030 in diameter wire welding applications.

Gun Tapered tips used in 0.025 in diameter wire welding applications.

Multi-purpose magnet holds steel pieces in place at 45, 90 and 135 degree angles.

Multi-purpose magnet holds steel pieces in place at 45, 90 and 135 degree angles.

The Lincoln Electric MAGNUM PRO flux-cored replacement nozzle is designed to protect the tip of the welding gun while welding with self-shielded flux-cored welding wire. Damaged or missing nozzles should be replaced immediately. For use with the Mig Pak 140 MP (K3821-1) and Mig Pak 180i MP DV (K5331-1) machines.

The Lincoln Electric MAGNUM PRO MIG replacement nozzle is used to protect the threads and openings of the gas diffuser/contact tip holder during the MIG welding process. The nozzle directs shielding gas around the tip and MIG wire to protect the weld puddle. Designed for welding with sheilding gas only. For use with the Mig Pak 140 MP (K3821-1) and Mig Pak 180i MP DV (K5331-1) machines.

Gun Standard tips used in 0.035 in diameter wire welding applications.

Gun Standard tips used in 0.030 in diameter wire welding applications.

Gun Standard tips used in 0.025 in diameter wire welding applications.

Multi-purpose magnet holds steel pieces in place at 45, 90 and 135 degree angles.

The Lincoln Electric flux-cored replacement nozzle is designed to protect the tip of the welding gun while welding with self-shielded flux-cored welding wire. Damaged or missing nozzles should be replaced immediately. For use with the Mig Pak 140/180, Weld Pak 140/180HD, FC90 or Easy Mig 140/180 machines.

The Lincoln Electric MIG replacement nozzle is used to protect the threads and openings of the gas diffuser/contact tip holder during the MIG welding process. The nozzle directs shielding gas around the tip and MIG wire to protect the weld puddle. Designed for welding with sheilding gas only. For use with the Mig Pak 140/180, Weld Pak 140/180HD or Easy Mig 140/180 machines.

Lincoln Electric Cut Welder Kit contains the base oxy-acetylene quality equipment needed for cutting, welding, and brazing in a rugged ballistic nylon bag.

This Lincoln Electric Straight-Head Chipping Hammer can be used to remove slag from metal welds. The ergonomic handle has a spring-style grip to reduce shock and fatigue. This welding hammer is made of tough steel and has a tapered point on one end and a vertical chisel on the other.

# 1 select natural white soapstone pencil refill.

Ruggedly constructed flat steel soapstone holder comes with a channel case design and convenient spring pocket clip. Easily indexable and smooth operating, this holder is designed for one-handed operation.

Careful cleaning of welding tips assures best welding flame and longer tip life. Quickly eliminates scale and orifice distortion from tip.

A low hydrogen iron powder type electrode that produces x-ray quality welds in all positions. Works best on DC reverse polarity welding. Good for field erections and steel structures, frames, trailer hitches and chassis. Low hydrogen electrode for low, medium and high carbon steel.

A mild steel, all position iron powder electrode. Designed to increase deposition rates and welding speeds. Provides good arc stability, low spatter and produces medium to low penetration. Can be used on ac or dc (straight or reverse polarity) welding current. Smooth, fine-rippled bead appearance. High deposition rates for fast performance. Operators love this easy-to-use, all-position electrode. Choose Fleetweld 47 for sheet metal lap joints and fillet welds, general purpose plate welding and maintenance jobs. 1 pound (0.45 kg) tube.

A mild steel, general purpose, all position electrode. Use AC or DC (straight or reverse polarity) welding current. Especially useful for welding where poor fit-up conditions (wide gaps) exist. Small sizes are well suited for welding thin materials where low heat input required. Use on light gauge metal sheet metal and duct work. For metal buildings and structures. 75-100 Amps. A great all-position electrode for low amperage welding on sheet metal, especially in applications where appearance is important. Designed for excellent performance with smaller AC welders with low open-circuit voltages and a perfect choice for jobs involving irregular or short welds that require a change in position.

Deep penetration. Low hydrogen, all purpose electrode. Excellent for tack and skip welds. Offers superior weld strength and appearance 5 kg (11 pound).

Ideal for both AC and DC currents. Penetrates deeply. Cools quickly, allowing welding in all positions. Leaves very few residues. Can be used for various tasks (regular or galvanized tanks, steel casting repair, machinery parts, construction, pressure pipes, etc.). Offers excellent arc stability and performance. An excellent stick electrode with the ability to start easily at low voltages. Designed for use with small welders. Works well on sheet metal, galvanized steel, and special coated steels. Has an easy-to-strike arc. Excellent for use on edge, corner, and butt joints.

Flux coating provides smooth arc transfer. Designed for joining stainless steel to mild or low alloy steel.

This clamping device holds and transfers the welding current to the stick electrode. This electrode holder is heat resistance and lightweight. Holders have a fiberglass handle and jaw and are insulated for safe operation. These electrode holders also have highly conductive copper tongs. 300 Amp capacity.

Electrode Holder is heat resistant and insulated for safety. It's rated for up to 400 Amps and welding rods are attached by twisting the bare metal end into the aperature at the tip of the holder. It is also equipped with a fiberglass handle.

A mild steel, general purpose, all position electrode. Use AC or DC (straight or reverse polarity) welding current. Especially useful for welding where poor fit-up conditions (wide gaps) exist. Small sizes are well suited for welding thin materials where low heat input required. Use on light gauge metal sheet metal and duct work. For metal buildings and structures. 75-100 Amps. A great all-position electrode for low amperage welding on sheet metal, especially in applications where appearance is important. Designed for excellent performance with smaller AC welders with low open-circuit voltages and a perfect choice for jobs involving irregular or short welds that require a change in position.

A mild steel, all position iron powder electrode. Designed to increase deposition rates and welding speeds. Provides good arc stability, low spatter and produces medium to low penetration. Can be used on ac or dc (straight or reverse polarity) welding current. Smooth, fine-rippled bead appearance. High deposition rates for fast performance. Operators love this easy-to-use, all-position electrode. Choose Fleetweld 47 for sheet metal lap joints and fillet welds, general purpose plate welding and maintenance jobs. 1 pound (0.45 kg) tube.

A mild steel, general purpose, all position electrode. Use AC or DC (straight or reverse polarity) welding current. Especially useful for welding where poor fit-up conditions (wide gaps) exist. Small sizes are well suited for welding thin materials where low heat input required. Use on light gauge metal sheet metal and duct work. For metal buildings and structures. 75-100 Amps. A great all-position electrode for low amperage welding on sheet metal, especially in applications where appearance is important. Designed for excellent performance with smaller AC welders with low open-circuit voltages and a perfect choice for jobs involving irregular or short welds that require a change in position.

Offers excellent arc stability and performance. A great stick electrode with the ability to start easily on low voltages. Designed for use with small welders. Works well on sheet metal, galvanized and special coated steels. Has an easy to strike arc. Excellent for use on edge, corner and butt joints.

The Superarc L-56 MIG Wire is a premium copper coated MIG wire from Lincoln Electric. SuperArc L-56 tolerates metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust- free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 12.5 LB Spool.

The Superarc L-56 MIG Wire is a premium copper coated MIG wire from Lincoln Electric. SuperArc L-56 tolerates metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust- free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 12.5 LB Spool.

The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 11 lb spool.

The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 2 lb spool.

The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 2 lb spool.

The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 2 lb spool.

Has a low melting point and excellent fluidity. Ideal for 6000 series Aluminum base metals. This wire is suitable for sustained elevated temperature service. Less sensitive to cracking. 1 pound ( 0.45 kg) spool.

This lead-free petroleum-based plumbing flux is a paste, designed to clean metal surfaces for consistent solder flow. It provides a protective barrier against heat scale and re-oxidation.

Designed for electrical applications, electrical silver bearing rosin core solder is perfect for use on speaker wires, small motors and appliances and for general electronic repairs. The rosin-core base eliminates the need for flux. It has a melting temperature of 430°F.

Has a low melting point and excellent fluidity. Ideal for 6000 series Aluminum base metals. This wire is suitable for sustained elevated temperature service. Less sensitive to cracking. 1 pound ( 0.45 kg) spool.

Auto darkening welding helmet. Variable shade from 9 to 13. Switching speed of 1/25,000 seconds. Adjustable sensitivity and delay. Solar powered no batteries required. Fully automatic.

For plasma and oxyacetylene cutting operations. 100% surface seal keeps sparks, spatter, sand, dirt and heat away from your eyes. Comfortable to wear with a wide angle of view.

Classic Lincoln Electric Welding Beanie for under helmet protection from errant sparks. 100% flame retardant material.

Classic Lincoln Electric Welding Beanie for under helmet protection from errant sparks. 100% flame retardant material.

Shade #10 replacement lens for Lincoln Electric fixed shade helmet CK2800-1 (see BMR code 002-0243) & K2800-1. Durable polycarbonate lens is shatter resistant.