Chimneys

Entirely made of thermoplastic, this multi-diameter (5 in 1) roof flashing is designed for simplified use. Simply break the seal and remove the excess for pipe vents ranging from 1.25" to 4" in diameter. It is especially suitable for roof pitches from 3.5/12 to 12/12. UV and cold-resistant, it incorporates a water deflector.

This chimney cap belongs to the RadonX range, the first PVC piping solution specially designed, tested, and labelled to meet the needs of collecting and evacuating underground gases from under the slab, in order to reduce indoor radon levels. Ideal for low-rise construction, RadonX maximizes system integrity with compatible pipes, fittings, solvent cement, and accessories. Designed and tested as a unique system by IPEX Inc., RadonX components should not be mixed with those from other manufacturers to prevent radon leaks.

Get this useful pellet vents kit and install it on the ground floor.

Get this quality heat shield for your stove.

Install this set of vents on the ground floor for your pellet appliance.

Install this essential pellet vents set in your basement for your pellet stove.

Optimize the proper functionning of your plumbing roof vent with this replacement cap.

Equip your chimney with this appropriate universal finishing band for double wall pipe.

The adjustable attic insulation shield with dropdown must be installed where the chimney enters the attic space in any installation. Designed to keep insulation away from the chimney and to maintain the mandatory 2" clearance to combustibles. Adjustable from 12" to 22". Drop down shield protects joist area.

The insulated T cap twist-locks into the bottom of the wall Support. It is removable to provide easy access for chimney maintenance and inspection.

The insulated T cap twist-locks into the bottom of the wall Support. It is removable to provide easy access for chimney maintenance and inspection.

The insulated T cap twist-locks into the bottom of the wall Support. It is removable to provide easy access for chimney maintenance and inspection.

When your chimney goes up through a flat ceiling, attic space, then thru the roof, you may choose the model SuperVent 2100 decorator ceiling support installation kit. Includes: Deluxe rain cap, adjustable attic insulation shield with dropdown, decorator ceiling support, stove pipe adaptor.

The adjustable attic insulation shield with dropdown must be installed where the chimney enters the attic space in any installation. Designed to keep insulation away from the chimney and to maintain the mandatory 2" clearance to combustibles. Adjustable from 12" to 22". Drop down shield protects joist area.

Use this complete fireplace starter kit for your wood stove.

Use this complete fireplace starter kit for your wood stove.

Use this complete fireplace starter kit for your wood stove.

When your chimney goes up through a flat ceiling, attic space, then thru the roof, you may choose the model SuperVent 2100 decorator ceiling support installation kit. Includes: Deluxe rain cap, adjustable attic insulation shield with dropdown, decorator ceiling support, stove pipe adaptor.

The fireplace bellows from the Geronimo collection combines practicality with old-world elegance. Its classic design and robust construction make it a definite aesthetic addition, not to mention its unmatched ability to rekindle the flames of your hearth. Made with high-quality materials, this bellows is both durable and aesthetic, adding a touch of rustic charm.

This T-adapter is used for pellet appliances. It is used as a starting pipe on the exhaust outlet of the appliance. A top silicone gasket connects in seconds to ensure gasket integrity.

Used to increase flue pipe size, crimped on big end.

Aids in cleaning and inspection.

Used to connect two lengths of flue pipe together, adjustable from 0° to 90°.

Used to connect two lengths of flue pipe together, adjustable from 0° to 90°.

Used to connect two lengths of flue pipe together, adjustable from 0° to 45°.

Self-drilling screws made from Black Zinc.

Used to connect two lengths of flue pipe together, adjustable from 0° to 90°.

This corrugated elbow is used to connect two lengths of drain pipe.

This corrugated elbow is used to connect two lengths of drain pipe.

This corrugated elbow is used to connect two lengths of drain pipe.

Install on wall where flue pipe connects to masonry chimney breech.

Used to increase flue pipe size, crimped on big end.

Used to connect two lengths of flue pipe together.

Used to connect two non-crimped ends of pipe together, crimped on both ends.

Install on wall where flue pipe connects to masonry chimney breech.

Used to connect two lengths of flue pipe together.

Install on wall where flue pipe connects to masonry chimney breech.

Used with rear outlet stoves to direct exhaust upward.

Used with rear outlet stoves to direct exhaust upward.

Used to reduce flue pipe size, crimped on small end.

Used to connect two non-crimped ends of pipe together, crimped on both ends.

Used to connect two non-crimped ends of pipe together, crimped on both ends.

Closes off one end of an assembled tee.

Used to connect two lengths of flue pipe together, adjustable from 0° to 45°.

Used to increase flue pipe size, crimped on big end.

Used to reduce flue pipe size, crimped on small end.

Used to reduce flue pipe size, crimped on small end.

Used to increase flue pipe size, crimped on big end.