Valves

Drain cap valve for draining by suction and filling.

Protect your home from leaks and water damage with this smart WiFi-controlled shut-off valve. Designed for automated and remote management, it allows you to instantly cut off the water supply in case of an anomaly detection. Compatible with home automation systems, it seamlessly integrates into your existing setup. The mobile app control provides real-time monitoring and customizable scheduling.

The pemanent installation will be successful with this non-freeze wall hydrant notched flange.

The pemanent installation will be successful with this non-freeze wall hydrant notched flange.

The pemanent installation will be successful with this non-freeze wall hydrant notched flange.

The pemanent installation will be successful with this non-freeze wall hydrant notched flange.

The Plumbeeze check valve for sump pumps and wastewater features a full-flow valve design. With a 100% opening and a 15-degree angle to reduce water hammer upon pump shutdown. This design also prevents debris buildup and blockage, ensuring optimal operation. Equipped with a reinforced nylon burst-proof seal, this check valve provides lasting tightness. An efficient solution that replaces BMR code (063-7789) and ensures peace of mind for your drainage systems.

Get the tee valve in lead-free material to control the quarter turn effectively.

The unleaded ball valve offers an integral passage.

The unleaded ball valve offers an integral passage.

The unleaded ball valve offers an integral passage.

The unleaded ball valve offers an integral passage.

The unleaded ball valve offers an integral passage.

The silent check valve 350380 is designed to fit 1-1/2” discharge pipes for sump pumps. It prevents water from flowing back into the basin after each pump cycle and reduces noise with its closing system that dampens water hammer. Its universal design allows it to be used with various pump brands. Made from durable plastic, it features rubber fittings and stainless steel clamps for better sealing.

The unleaded ball valve offers an integral passage.

The unleaded ball valve offers an integral passage.

This check valve is designed to work with sump pumps. Its dual-sized slip-fit side accommodates either 1 1/4" and 1 1/2" pump discharge threads. It prevents water backflow into the pump.

The unleaded ball valve offers an integral passage.

The unleaded ball valve offers an integral passage.

Use this solid straight valve for your plumbing.

Easily manipulate this straight shut-off valve for your plumbing system.

The lead-free check valve controls the direction of fluid flow (liquid, gas, compressed air, etc.). Can be used horizontally or vertically.

Add this valve to your plumbing to avoid freezing at the water outlet.

The 1" lead-free check valve controls the direction of fluid flow (liquid, gas, compressed air, etc.). Can be used horizontally or vertically.

Choose this ball valve to equip your air shut off.

The antifreeze safety valve is installed on a 1/2" female brass fitting, usually at the beginning of the line, and can also be doubled for colder or lower areas. When the water temperature drops to 1°C, the valve opens, allowing a trickle of water to flow through to prevent freezing. When the temperature rises above 4°C, it automatically closes again until the next cycle.

Add this valve to your plumbing to avoid freezing at the water outlet.

The valve valve C X C brass 1/2" meets the needs of your devices perfectly. Connection type tin solder x tin solder.

The 3/4" lead-free check valve controls the direction of fluid flow (liquid, gas, compressed air, etc.). Can be used horizontally or vertically.

The check valve is easy to screw and is provided with a stainless steel spring.

Add this valve to your plumbing to avoid freezing at the water outlet.

This check valve prevents the backflow of water into the pump. Its lead-free brass construction can safely be used for potable water. Lead-free.

Give plumbing a different and efficient flow with the ball stop valve tee.

Repair and maintain your waterer's pilot valve with this kit.

These seals are suitable for pilot valves

This check valve is designed to work with sump pumps. It prevents the backflow of water into the pump.

This check valve prevents the backflow of water into the pump. Its lead-free brass construction can safely be used for potable water.

Get this solid angle valve for your plumbing.

This check valve is designed to work with sump pumps. Its dual-sized slip-fit side accommodates either 1 1/4" and 1 1/2" pump discharge threads.

Use the PEX system with crimp rings with the drain valve.

Threaded type, with cast iron handle, the brass FPT valve can be used in fully open or fully closed position.

Allow for an adequate sediment release with this threaded boiler drain valve.

Connect this boiler drain valve directly to the piping.

Connect this boiler drain valve directly to the piping.

Connect this boiler drain valve directly to the piping.

The 1" brass FPT valve can be used in the fully open or fully closed position.

Discharge used water efficiently with this drain valve.

The 3/4" brass FPT valve can be used in the fully open or fully closed position.