Concrete, cement and grout

This pre-blended, fast-setting cement mix is formulated for concrete and masonry repairs where a thickness of 5 cm (2 in) or less is required. Its non-shrinking, high-strength composition sets in minutes and allows vehicle traffic in as little as 2 hours, making it well suited for driveways, walkways, steps, and other surfaces that need to return to service quickly.

This pre-blended, fast-setting cement mixture is formulated for quick and reliable concrete and masonry repairs. Its non-shrinking, high-strength formula is ideal for patches up to 2" thick. It sets in minutes and can handle vehicle traffic in as little as 2 hours, making it a practical choice for driveways, garage floors, steps, and other concrete surfaces. Suitable for both residential DIY projects and professional repair applications where downtime must be kept to a minimum.

The TexNov conditioner is ideal to clean every kind of concretes.

This concentrated concrete conditioner is a high-performance, biodegradable cleaner formulated to thoroughly clean and prepare concrete, cement, and clay brick surfaces. It increases surface adherence, removes laitance, efflorescence, dirt, and calcareous deposits, and creates a surface profile ideal for painting or coating applications. Equally suited to professional contractors and DIY users, it simplifies surface preparation work and delivers consistent, reliable results on a wide range of cementitious substrates.

This concentrated concrete conditioner is a high-performance, biodegradable cleaner formulated to thoroughly clean and prepare concrete, cement, and clay brick surfaces. It increases surface adherence, removes laitance, efflorescence, dirt, and calcareous deposits, and creates a surface profile ideal for painting or coating applications. Equally suited to professional contractors and DIY users, it simplifies surface preparation work and delivers consistent, reliable results on a wide range of cementitious substrates.

Texnov concrete conditioner is a high-performance biodegradable cleaner formulated to deep-clean all concrete types while improving adhesion. It removes surface contaminants that would otherwise prevent coatings, sealers, or overlays from bonding properly. Suitable for residential and commercial concrete surfaces, this concentrated formula delivers reliable preparation results before any finishing or repair work.

This pre-blended Type N mortar mix combines masonry cement and natural mortar sand in a ready-to-use formula designed for clay, concrete, and stone masonry bricks. Suitable for load-bearing walls requiring low compressive strength as well as non-load-bearing walls, it meets CSA A179-14 standard when applied as directed. The grey mortar accepts colouring agents for customized finishing.

This pre-blended sand mix combines Portland cement and well-graded natural sand in a ready-to-use formula suited for new concrete construction, overlays, and repairs. It is formulated for applications requiring a thickness of 2 inches or less. The surface can be finished smooth with a trowel or textured with a broom or brush, and reopened to foot traffic within 24 hours. Meets or exceeds ASTM C 387 compressive strength requirements.

This pre-blended concrete mix is formulated for new concrete construction, overlays, and repairs requiring a minimum thickness of 2" (5 cm). It meets or exceeds ASTM C 387 compressive strength requirements and opens to foot traffic in approximately 24 hours. Suitable for a wide range of residential and commercial applications where a durable, code-compliant concrete finish is needed.

This polymer-modified, pre-blended cement mixture is formulated for fast, durable concrete repairs from a feather-edge up to 1/2 in (1.25 cm) thick. Its superior bonding strength — 8 to 10 times greater than standard cement mix — ensures long-lasting adhesion without priming. Ready-to-use straight from the bag, it opens to light foot traffic in 12 to 24 hours and handles heavy traffic after 48 hours, making it well-suited for driveways, steps, and floors.

This polymer-modified, pre-blended cement mixture is specifically designed for repairing, smoothing, and resurfacing concrete surfaces quickly and effectively. Its self-bonding formula delivers a bond 8 to 10 times stronger than regular cement mix, eliminating the need for a separate bonding agent. Suitable for repairs from a feather-edge up to 1/2 inch thick, it also serves as a setting bed for dense-surface stone, marble, slate, quarry tile, flagstone, brick, and patio blocks. Light foot traffic is possible within 12 to 24 hours, and heavy traffic after 48 hours.

Rapid Post is a pre-blended, rapid-setting concrete formulated specifically for setting fence posts and poles. Pour directly from the bag into the hole, add water, and agitate with a rod or stick — no mixing equipment needed. The material sets in minutes, eliminating the need for post bracing, and the post can be put into service just 3 hours after installation.

This multi-purpose mortar sand is washed, flame-dried, and screened for consistent particle size and cleanliness. Its preparation process removes impurities and excess moisture, making it ready to blend with cement, lime, or other binders for masonry, jointing, and patching applications. Suitable for both interior and exterior use on residential and commercial projects.

This Type GU general use Portland cement is a versatile hydraulic binder suited for a wide range of construction applications, including concrete slabs, foundations, mortar mixes, and masonry work. It meets the requirements of standard construction projects where no special properties are needed. The 30 kg bag is practical for both job-site use and residential projects. It is compatible with common concrete admixtures and aggregates, making it a reliable choice for contractors and DIY users alike.

FastSet All-Crete HPC is a commercial-grade, high-performance cement formulated as a fast-setting grout, repair mortar, or concrete. Its rapid set and hardening cycle delivers high initial strength alongside high ultimate strength, making it well suited for structural repairs, anchoring, and grouting applications where downtime must be minimized.

This polymer-modified, shrinkage-compensated repair mortar delivers high-strength, rapid-setting performance for structural concrete and masonry repairs. Formulated with high-performance cement, it bonds reliably to vertical and overhanging surfaces without sagging. Suitable for structural rehabilitation of concrete walls, columns, and masonry facades where fast return to service is required.

This FastSet HPC (High Performance Cement) rapid-set repair mortar is a polymer-modified, shrinkage-compensated material engineered for structural concrete and masonry repairs. Its high-strength formulation bonds reliably to vertical and overhanging surfaces, making it suitable for demanding structural rehabilitation work where fast return-to-service is required.

This portland lime type N mortar, formulated at a 1-1-6 ratio, is designed for bonding brick, architectural block, and stone in both interior and exterior masonry applications. Its balanced lime content provides good workability and adhesion, making it well suited for structural and decorative masonry work on residential and commercial projects.

This fast-setting, fast-hardening concrete mix is designed for projects that demand rapid return to service. It reaches 20.7 MPa compressive strength in just 3 hours, then continues to cure to 48.3 MPa at 28 days. Suitable for applications from 2" to 24" thick, it offers reduced shrinkage and a set time of 25 to 45 minutes, allowing adequate time for placement and finishing. Ideal for repairs, footings, posts, and any structural work where downtime must be minimized. Exceeds ASTM C928 R3 requirements.

This high-strength concrete mix delivers twice the compressive strength of ordinary concrete, reaching 31 MPa at 24 hours and 55 MPa at 28 days. Its formulation provides enhanced resistance to freeze-thaw cycles and de-icing salts, making it well suited for exterior applications exposed to Canadian winters. Recommended for steps, sidewalks, and other flatwork requiring durable, long-lasting performance.