Cement products

Choose this self-leveler to adjust the floor of your home in few steps.

Make sure you get great results by choosing to use this SIKA grout.

Refinish and protect concrete surfaces with Parging Mix. This pre-blended cement mixture is specially formulated for parging above and below grade, delivering a durable, uniform finish. It adheres strongly to concrete blocks and poured walls, helping smooth out imperfections up to 10 mm deep. Just add water to parging mix and apply with a trowel for easy use. This mix is ideal for both DIY users and professionals looking for a weather-resistant, polished exterior.

The SIKA PowerSet is ideal for quick repairs of concrete and aggregate coatings.

Nivabond is a ready-to-use emulsion concrete adhesive. It is ideal for bonding a new cement mixture such as concrete, sand or parging mix to older concrete surfaces. For interior and exterior use.

Nivabond is a ready-to-use emulsion concrete adhesive. It is ideal for bonding a new cement mixture such as concrete, sand or parging mix to older concrete surfaces. For interior and exterior use.

Sikadur crack repair is a multipurpose epoxy resin. It can be applied directly to horizontal cracks. This product is solvent free and moisture-tolerant. It penetrates and seals fine, hairline cracks and is five times stronger than concrete.

Give your renovations an excellent adhesion thanks to this admixture which is also a bonding agent.

Get this kit to effectively repair your leaking foundation.

Repair leaks in your home with this specially designed product.

This SikaRepair SHB resurfacing mortar by Sika is a one-component, horizontal concrete repair. It's easy to trowel and has a high early strength.

This SikaRepair SHB resurfacing mortar by Sika is a one-component, horizontal concrete repair. It's easy to trowel and has a high early strength.

This SikaRepair SHB resurfacing mortar by Sika is a one-component, horizontal concrete repair. It's easy to trowel and has a high early strength.

Effectively repair cracks at home with this easy-to-use product.

Granastar® Colour for Cement fromis a high-quality synthetic oxide powder that delivers deep black colour to concrete, stucco, mortar and other cement-based mixes. Designed for smooth integration, it blends evenly to create clean, consistent finishes without affecting performance. Suitable for indoor and outdoor use, this cement colourant adds design flexibility for both decorative and structural projects, making it a reliable choice for DIY users and professionals alike.

This Permafix repointing mortar will be ideal for your masonry and bricklaying jobs.

High-Strength, High-Load Capacity and VOC-Free Pure Epoxy Anchoring Adhesive with Extended WorkingTime.

Sikaflex -1a is a premium-grade, high performance, moisture-cured, one-component, polyurethane-based, non-sag elastomeric sealant.

Sikaflex -1a is a premium-grade, high performance, moisture-cured, one-component, polyurethane-based, non-sag elastomeric sealant.

Sikaflex -1a is a premium-grade, high performance, moisture-cured, one-component, polyurethane-based, non-sag elastomeric sealant.

Sikaflex -1a is a premium-grade, high performance, moisture-cured, one-component, polyurethane-based, non-sag elastomeric sealant.

Sikaflex -1a is a premium-grade, high performance, moisture-cured, one-component, polyurethane-based, non-sag elastomeric sealant.

SIKA FastFix Power Patch is a 2-component liquid mortar to repair concrete quickly without mixing it with water.

Sikacrete®-08 SCC is a ready-to-use, highly flowable, self-compacting, cement-based concrete, usable for concrete thickness between 25 and 450 mm (1 and 18 in).

This self-levelling finishing grout can also be used as an underlayment and applied without trowelling. When used as a wear surface, it has the advantage of being applicable over a radiant heating system or used as a light industrial floor. Suitable for both interior and exterior use, it produces a perfectly smooth surface.

This Fastset concrete crack repair product contains a hybrid polyurethane-based formula. It is self-levelling with low viscosity and is specifically designed to deeply fill cracks to achieve superior adhesion. Quick-drying, it allows traffic on the surface one hour after application at 25° C (77° F). This product can fill crack openings from 0.008 mm (1/300") to 25 mm (1").

This concrete repair epoxy is a fast-curing epoxy adhesive for multiple uses. Designed to prevent sagging, it is suitable for repairs on horizontal and vertical surfaces. Its malleable consistency also allows it to be shaped to achieve the desired profile.

This blend is specially designed to offer a simple solution to your fence post problems.

Poly-plug Bomix is a very fast setting mortar (less than 2 minutes) mainly used to quickly seal water leaks in foundations, shafts and masonry walls.

Poly-plug Bomix is a very fast setting mortar (less than 2 minutes) mainly used to quickly seal water leaks in foundations, shafts and masonry walls.

BMR Bond concrete glue is a ready to use emulsion, concrete adhesive. It is ideal for bonding a new cementitious mixture such as concrete, sand mix and parging mix to old concrete surfaces.

BMR Bond concrete glue is a ready to use emulsion, concrete adhesive. It is ideal for bonding a new cementitious mixture such as concrete, sand mix and parging mix to old concrete surfaces.

Elastomeric, non-sag, one-component, polyurethane-based sealant with wet curing.

This is a one-component, water-dispersed and low solvent-containing, acrylic-based solution used to prime concrete and wood surfaces prior to the application of Sika Level-125CA underlayments.

This acrylic primer is a one-component, water-dispersed and low solvent-containing, acrylic-based solution used to prime concrete and wood surfaces prior to the application of Sika Level-125CA underlayments.

Bomix Spread'n Bond is an easy-to-use resurfacing mortar that allows you to rejuvenate the appearance of your old concrete in a simple and durable way. It is ideal for resurfacing any concrete surface such as floors, walls, foundations, stairs and pavements. Spread'n Bond has been formulated with specific polymers and additives to achieve excellent adhesion to old concrete, high abrasion resistance and high water retention.

Bomix Spread'n Bond is an easy-to-use resurfacing mortar that allows you to rejuvenate the appearance of your old concrete in a simple and durable way. It is ideal for resurfacing any concrete surface such as floors, walls, foundations, stairs and pavements. Spread'n Bond has been formulated with specific polymers and additives to achieve excellent adhesion to old concrete, high abrasion resistance and high water retention.

Bomix Spread'n Bond is an easy-to-use resurfacing mortar that allows you to rejuvenate the appearance of your old concrete in a simple and durable way. It is ideal for resurfacing any concrete surface such as floors, walls, foundations, stairs and pavements. Spread'n Bond has been formulated with specific polymers and additives to achieve excellent adhesion to old concrete, high abrasion resistance and high water retention.

The DEWALT AT-3G anchoring adhesive is a high-strength acrylic-based product. It comes with a cartridge and an application nozzle for easy and quick installation. It is ideal for anchoring elements in concrete, stone, or brick.

Repair your concrete with this all purpose repair mortar, designed to be easy to use.

Apply this expandable polyurethane foam to fill the cracks in your house's foundations.

Sikaflex-11 FC+ is a 1-part, multipurpose elastic adhesive and joint sealant with very good application properties which bonds and seals most construction material substrates. Internal and external use.

Be sure to apply this primer to prepare your floor for the finishing step.

Buy this mortar, its results are instantaneous! It can clog concrete water leaks in less than two minutes.

Easy-match Bomix colour pigments can be added to concrete, mortar, stucco or other cement-based mixtures to produce a wide range of colours, depending on the dosages used.

Easy-match Bomix colour pigments can be added to concrete, mortar, stucco or other cement-based mixtures to produce a wide range of colours, depending on the dosages used.

Easy-match Bomix colour pigments can be added to concrete, mortar, stucco or other cement-based mixtures to produce a wide range of colours, depending on the dosages used.

Versafix Bomix is a fast setting (20 minutes) polymer modified repair mortar designed for the repair of damaged concrete surfaces. For interior and exterior use, Versafix is ideal for mounting thicker jobs where a fast cure time is essential such as vertical repairs like step corners or repairing concrete with deep cracks.