Chimneys

This roof support is used when the maximum height exceeds the allowed height by the primary support.

This roof support is used when the maximum height exceeds the allowed height by the primary support.

This roof support is used when the maximum height exceeds the allowed height by the primary support.

Use this wall thimble for a wall support installation.

Use this wall thimble for a wall support installation.

Use this wall thimble for a wall support installation.

Adapt the chimney to zero clearance fireplaces with this anchor plate.

Adapt the chimney to zero clearance fireplaces with this anchor plate.

Adapt the chimney to zero clearance fireplaces with this anchor plate.

Use this set to securely install your fireplace chimney to the wall of your living room.

Use this set to securely install your fireplace chimney to the wall of your living room.

Use this set to securely install your fireplace chimney to the wall of your living room.

The insulated T cap twist-locks into the bottom of the wall Support. It is removable to provide easy access for chimney maintenance and inspection.

The insulated T cap twist-locks into the bottom of the wall Support. It is removable to provide easy access for chimney maintenance and inspection.

The insulated T cap twist-locks into the bottom of the wall Support. It is removable to provide easy access for chimney maintenance and inspection.

When your chimney goes up through a flat ceiling, attic space, then thru the roof, you may choose the model SuperVent 2100 decorator ceiling support installation kit. Includes: Deluxe rain cap, adjustable attic insulation shield with dropdown, decorator ceiling support, stove pipe adaptor.

The adjustable attic insulation shield with dropdown must be installed where the chimney enters the attic space in any installation. Designed to keep insulation away from the chimney and to maintain the mandatory 2" clearance to combustibles. Adjustable from 12" to 22". Drop down shield protects joist area.

The DELTA-FLASH is an angled flashing for smooth edge finishing, cut-outs in windows and doors and vertical edges.

This T-adapter is used for pellet appliances. It is used as a starting pipe on the exhaust outlet of the appliance. A top silicone gasket connects in seconds to ensure gasket integrity.

Equip your chimney with this appropriate universal finishing band for double wall pipe.