Chimneys

This galvanized adjustable wall band stabilizes and supports pellet stove pipes against an outside wall. It is adjustable from 1″ to 3″ and maintains clearance to combustibles.

This increaser adapter for pellet vent stoves is used to increase the size of the pipe to the chimney. It attaches to 3″ collars and connects to 4″ vent pipes.

This ceiling support is used for the vent system from below the ceiling joist. It maintains a 1″ clearance to combustibles.

This galvanized steel storm collar maintains a weather tight seal between the vent and the roof flashing. Silicone must be applied (not included). Preserves fuel clearance.

Use this 45° elbow where deviation is necessary.

This galvanized wall thimble is an important component for pellet stove chimneys. It insulates between the pipe and the wall to protect any material from high temperature and risk of fire.

This pipe kit is used to ventilate pellet stoves. It includes everything needed for the installation. Secure installation.

This vertical chimney cap for pellet stove is designed to keep rain, snow and debris from entering the chimney. Its proven coupling joint connects in seconds to ensure joint integrity. Secure installation.

This Rafter Radiation Shield must be installed where the chimney is enclosed immediately below the roof line.

Install this round ceiling trim to the junction of the stove pipe and the masonry chimney for a neat finish.

Install this round ceiling trim to the junction of the stove pipe and the masonry chimney for a neat finish.

Install this round ceiling trim to the junction of the stove pipe and the masonry chimney for a neat finish.

Make an installation for cathedral ceiling for this chimney support.

Make an installation for cathedral ceiling for this chimney support.

Make an installation for cathedral ceiling for this chimney support.

Use the plate as a finishing accessory at the crossing point of the chimney on the roof ridge.

Facilitate the transition from SuperVent chimney to a simple or double wall stove pipe with twist-lock connection with this adaptor.

Facilitate the transition from SuperVent chimney to a simple or double wall stove pipe with twist-lock connection with this adaptor.

Facilitate the transition from SuperVent chimney to a simple or double wall stove pipe with twist-lock connection with this adaptor.

Facilitate the transition from SuperVent chimney to a simple or double wall stove pipe with twist-lock connection with this adaptor.

Use this additional support when the chimney height exceeds the height that the initial support can hold.

Use this additional support when the chimney height exceeds the height that the initial support can hold.

Use this additional support when the chimney height exceeds the height that the initial support can hold.

Protect the chimney installation from rain with this flashing collar.

Protect the chimney installation from rain with this flashing collar.

Protect the chimney installation from rain with this flashing collar.

Complement the top of your chimney with this universal cap.

When your chimney goes up through a flat ceiling, attic space, then thru the roof, you may choose the model SuperVent 2100 decorator ceiling support installation kit. Includes: Deluxe rain cap, adjustable attic insulation shield with dropdown, decorator ceiling support, stove pipe adaptor.

Install on wall where flue pipe connects to masonry chimney breech.

Used to connect two lengths of flue pipe together.

Used to connect two lengths of flue pipe together.

The adjustable attic insulation shield with dropdown must be installed where the chimney enters the attic space in any installation. Designed to keep insulation away from the chimney and to maintain the mandatory 2" clearance to combustibles. Adjustable from 12" to 22". Drop down shield protects joist area.

Entirely made of thermoplastic, this multi-diameter (5 in 1) roof flashing is designed for simplified use. Simply break the seal and remove the excess for pipe vents ranging from 1.25" to 4" in diameter. It is especially suitable for roof pitches from 3.5/12 to 12/12. UV and cold-resistant, it incorporates a water deflector.

Choose the "T" with cap to assemble your heating system.

Get this quality heat shield for your stove.

The insultation shield protects building materials against radiant heat from the chimney and helps maintain temperatures within the chimney system.

This set of stainless steel hose is perfect for connecting appliances to pellets, oil, wood.

This set of stainless steel hose is perfect for connecting appliances to pellets, oil, wood.

This set of stainless steel hose is perfect for connecting appliances to pellets, oil, wood.

Use this complete fireplace starter kit for your wood stove.

Use this complete fireplace starter kit for your wood stove.

Use this complete fireplace starter kit for your wood stove.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.