Chimneys

The insultation shield protects building materials against radiant heat from the chimney and helps maintain temperatures within the chimney system.

Use the plate as a finishing accessory at the crossing point of the chimney on the roof ridge.

This Rafter Radiation Shield must be installed where the chimney is enclosed immediately below the roof line.

Use this universal roof guy kit for a better support in case your chimney elevates 5 ft or more above the roof.

Chooose this increaser to add to the chimney.

This snow splitter is designed to deflect snow and ice. Panels are easily assembled and prevent unnecessary strain or damages to the chimney. The splitter is made from heavy gauge galvanized steel and mounts directly on the roof above the chimney.

This galvanized steel storm collar maintains a weather tight seal between the vent and the roof flashing. Silicone must be applied (not included). Preserves fuel clearance.

This ceiling support is used for the vent system from below the ceiling joist. It maintains a 1″ clearance to combustibles.

This increaser adapter for pellet vent stoves is used to increase the size of the pipe to the chimney. It attaches to 3″ collars and connects to 4″ vent pipes.

This adjustable pellet flashing is used for a waterproof installation through pitched roofs from 0/12 to 6/12 and 6/12 to 12/12. It maintains fuel clearance.

This T-adapter is used for pellet appliances. It is used as a starting pipe on the exhaust outlet of the appliance. A top silicone gasket connects in seconds to ensure gasket integrity.

This pipe length is used for a pellet stove and allows a good circulation for flue gases.

Adjustable section for pellet stove up to 9 1/2'' by simply sliding over a fixed length. Used for pellet vent.

This set of stainless steel hose is perfect for connecting appliances to pellets, oil, wood.

Use this resistant chimney flue extender to install your stove to keep your home warm all winter.

This rigid stainless steel pipe is designed for masonry chimneys. For wood, oil, gas and charcoal stoves.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

Preserve heat better with this telescopic double face pipe for 430 chimneys.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

Used to connect woodstove to entrance of chimney.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

The stove pipe connects a wood stove to insulated chimneys. The double wall system features a black aluminized steel outer casing and stainless steel inner liner.

Preserve heat better with this telescopic double face pipe for 430 chimneys.

Preserve heat better with this telescopic double face pipe for 430 chimneys.

Preserve heat better with this telescopic double face pipe for 430 chimneys.

Preserve heat better with this telescopic double face pipe for 430 chimneys.

This pipe length is used for a pellet stove and allows a good circulation for flue gases.

This pipe length is used for a pellet stove and allows a good circulation for flue gases.

This pipe length is used for a pellet stove and allows a good circulation for flue gases.

This pipe length is used for a pellet stove and allows a good circulation for flue gases.

This pipe length is used for a pellet stove and allows a good circulation for flue gases.

This pipe length is used for a pellet stove and allows a good circulation for flue gases.

This stainless steel chimney length is designed to withstand temperatures up to 2,100°F (1,150°C). Certified to the ULC S629 thermal resistance standard, it features a 1 1/8" overlap between each section. A 2" clearance must be maintained from combustible materials to ensure safety.