Specialty products

This lubricant will be useful for any metallic friction, as much from motors as from locks or chains.

Reduce friction in all types of engines or mechanisms with this all-purpose lubricant.

Get the oil spills under control with this regular absorbent.

Use this silicone to protect your car's pieces from corrosion.

This 3-in-1 motor oil is a special blend designed for your 1/4 HP motors or larger.

Release rusty parts and eliminate squeaks with penetrating oil WD-40.

Release rusty parts and eliminate squeaks with penetrating oil WD-40.

Release rusty parts and eliminate squeaks with penetrating oil WD-40.

White lithium grease reduces friction in all metal-to-metal and metal- to-plastic applications. It protects against rust and corrosion. It will not melt, run, freeze or wash off.

Apply this grease on your equipment to keep it in good condition.

Make pipes slide more easily with this penetrant loosener.

Opt for this 3-in-1 lubricant for a complete maintenance of your garage door.

This automatic transmission fluid meets the Dexron III standard. It adheres to strict requirements regarding low-temperature viscosity, shear stability, high-temperature performance, and foam formation. Designed to effectively protect your automatic transmission and ensure its proper functioning, this fluid is suitable for GM and Ford vehicles manufactured before 2006.

The Specialist aerosol penetrant targets rust and corrosion on components and mechanisms. With an extremely low surface tension, it is capable of penetrating through rust, joints, or tight wires to lubricate seized fasteners. Water-resistant, it can also be used to displace moisture and can be used preventively to prevent the formation of rust or corrosion. Designed to be used from -20°C to 90°C on metal, rubber, plastic, alloys, and most paints.

The universal long-lasting antifreeze/coolant is designed to provide superior protection for diesel and gasoline engines. This hybrid ethylene glycol-based antifreeze effectively protects against corrosion and cylinder liner pitting. Free from nitrites and phosphates, it ensures protection for over 5 years or up to 500,000 km. Suitable for heavy trucks, cars, and light utility vehicles of all makes and models, it is ideal for European, Asian, and American manufacturers, regardless of fuel type.

This long-lasting antifreeze/coolant is ethylene-based and intended for heavy-duty diesel engines. Its high nitrite content effectively protects cylinder liners from pitting and cavitation, while the inclusion of an organic corrosion inhibitor (NOAT) effectively shields metal from acid attacks, ensuring superior protection for over 500,000 km, extendable up to 1,000,000 km with the addition of a booster fluid. Designed for use with vehicles: Caterpillar, Volvo/Mack, John Deere, Paccar (Kenworth & Peterbilt), Cummins, Freightliner, GM, Ford, International, New Holland, and J.I. Case.

This conventional ethylene glycol-based antifreeze/coolant is intended for older automobile engines or current trucks. It can also be used in diesel engines if additional supplemental coolant additives (SCA) are added. This product has a low silicate content and does not contain nitrite or phosphate. It is designed for General Motors automobiles before 1994, Chrysler before 1999, and Ford before 2001. It can also be used in trucks from Caterpillar, Volvo/Mack, John Deere, Paccar (Kenworth & Peterbilt), Cummins, Freightliner, International, GM, Ford, New Holland, and J.I. Case. Dilute before use.

This universal long-life antifreeze/coolant (yellow) is designed to provide optimal protection for all types of vehicles. Compliant with ASTM D3306/4985, ASTM D6210, TMC RP-323, TMC RP-364, TMC RP-329, Chrysler MS9769, GM1825M & 6277M, Ford M97B51-A1, JIS K2234, JASO M325, FVV HEFT R443, BS6580, ANFOR 15-601, Detroit Diesel 7SE298, International, SAE J1034 & J1942, and ASTM D4340 standards. It is compatible with heavy trucks, cars, and light utility vehicles from all American, European, or Asian manufacturers, regardless of their fuel type. Dilute before use.

This conventional antifreeze/coolant (green) is designed to provide effective protection for vehicles. Compliant with ASTM D-3306, ASTM D-4985, ASTM D-6210, Cummins 90T8-4, General Motors GM1825M, GM1899M, Ford ESE-M97B44-A, TMC RP-302A, John Deere H24, and Chrysler MS-7170 standards. It is compatible with General Motors vehicles before 1994, Chrysler before 1999, and Ford before 2001. It can be used in trucks from Caterpillar, Volvo/Mack, John Deere, Paccar (Kenworth & Peterbilt), Cummins, Freightliner, International, GM, Ford, New Holland, and J.I. Case. Usable in diesel engines with additional SCA additives. Dilute before use.

This HD diesel long-life antifreeze/coolant (red) is designed to provide optimal protection for engines. Compliant with ASTM D-6210, TMC RP-329 Type A, ASTM D-4985, ASTM D-3306, TMC RP-302A, and CAT EC-1 standards, it is compatible with vehicles and equipment from Caterpillar, Volvo/Mack, John Deere, Paccar (Kenworth & Peterbilt), Cummins, Freightliner, GM, Ford, International, New Holland, and J.I. Case. Its advanced formula ensures reliable performance and long engine life.

This HD diesel long-life antifreeze/coolant (red) is designed to provide top-notch protection for engines during winter. Compliant with ASTM D-6210, TMC RP-329 Type A, ASTM D-4985, ASTM D-3306, TMC RP-302A, and CAT EC-1 standards, it is intended for vehicles and equipment from Caterpillar, Volvo/Mack, John Deere, Paccar (Kenworth & Peterbilt), Cummins, Freightliner, GM, Ford, International, New Holland, and J.I. Case. Its advanced formula ensures optimal performance and long engine life.

The PL-100 is the best all-purpose lubricant with antifriction on the market. It is more effective, longer-lasting and faster-acting than any other look-alike product.

The PL-100 is the best all-purpose lubricant with antifriction on the market. It is more effective, longer-lasting and faster-acting than any other look-alike product.

The PL-100 is the best all-purpose lubricant with antifriction on the market. It is more effective, longer-lasting and faster-acting than any other look-alike product.

The PL-100 is the best all-purpose lubricant with antifriction on the market. It is more effective, longer-lasting and faster-acting than any other look-alike product.

Use this lube for chains, cables and wherever extreme pressure or temperature occur.

Opt for this non-oily, no-drip and no-stain lubricant for a protection suited for any materials, at any time and weather.

Opt for this non-oily, no-drip and no-stain lubricant for a protection suited for any materials, at any time and weather.

Opt for this non-oily, no-drip and no-stain lubricant for a protection suited for any materials, at any time and weather.

Oil your jacks for an even easier lifting.

Opt for a quick lubrication with this aerosol silicone lubricant.