Fittings and accessories for watering equipment

Control the flow of water for your animals in their water bowl with this valve.

Get this "U" bolt size 1 5/8 in with nuts and washers for your drinking trough.

Keep your pipes out of the way with this hook.

Keep your pipes out of the way with this hook.

Get yourself this rubber seat for float 766 for your water bowl.

Allow your float 766 to stay in place with this arm.

Get this anti frost plug to prevent water from freezing in your water bowl.

Optimize your water bowl with this spring for valve.

Get this clamp to securely wrap your waterer around round or square posts.

This te is used for supplying water to drinkers.

This wall pass-through cap is used for 21L cast iron drinkers.

This tip can accommodate two other female tips.

Prevent water from leaking out of your tank with this cap.

Get this high grade o'ring to seal a valve.

Use these brackets to fix the drinking trough to a post.

Install this washer to maximize the use of your valve.

Reinforce your water bowl with this bulk hose for 1/2 MPT adapter.

Reinforce your water bowl with this bulk hose for 1/2 MPT adapter.

ASC Series straight couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

ASC Series straight couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

ASC Series straight couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

ASC Series straight couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

This female tee is manufactured from high grade fiberglass reinforced nylon. It is non corrosive; using high quality materials approved for use with drinkable water. Designed to connect a range of ID nominally sized polyethylene pipe, tube and hose with varying wall thicknesses. Connection can be made by hand, without tools. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

This female tee is manufactured from high grade fiberglass reinforced nylon. It is non corrosive; using high quality materials approved for use with drinkable water. Designed to connect a range of ID nominally sized polyethylene pipe, tube and hose with varying wall thicknesses. Connection can be made by hand, without tools. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

This set contains three 80 W heating elements and a rotomolded polyethylene resin protective box for the Polyflow drinking trough (BMR Code: 001-7546). This box is fitted under the polyflow's stainless steel bowl, providing good insulation of the bowl during periods of severe frost.

Stainless steel heating element of 80 W and 24 V with protection for Polyflap drinking trough (BMR Code: 001-7545).

AT Series tee couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

AT Series tee couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

AT Series tee couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

AT Series tee couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

ARSC Series reducing straight couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

ARSC Series reducing straight couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

ARSC Series reducing straight couplings are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

AMA Series male adapters are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

AMA Series male adapters are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

AMA Series male adapters are used to connect a range of polyethylene pipe with varying wall thicknesses. It is re-usable and utilizes a unique way to connect pipe without the need for multiple replacement parts.

A high pressure female adaptor coupling allows the connection between two pipes or hoses.

A high pressure female adaptor coupling allows the connection between two pipes or hoses.

A high pressure female adaptor coupling allows the connection between two pipes or hoses.

This stand is designed to support the Polyflow drinker (BMR code .001-7546).