Maple sugaring

Use these quality filters needed for proper operation of your syrop filter press.

Use these quality filters needed for proper operation of your syrop filter press.

Use these quality filters needed for proper operation of your syrop filter press.

Use these polyester filters for your round vacuum press.

Use these polyester filters for your round vacuum press.

Use these polyester filters for your round vacuum press.

Equip yourself with this Pruno wire tightener with spring for installing or repairing wires.

Fill containers with this aluminium measuring jug.

Genugel gel is for the hardness of sweets and lollipops.

Get this Pruno winding tip hexagon socket 1 1/4 in for electric screwdriver and battery drill.

Use this mold to create maple candies.

Get this soft and confortable adjustable strap for wearing tools on neck or shoulder.

This vacuum filter press will allow you to produce a maple syrup that meets your expectations.

Get this quality stainless steel syrup filter tank available in different sizes.

Get yourself this Pruno flaring cone to spread the mainline and to ease the implantation of the multi fittings.

Get this quality stainless steel syrup filter tank available in different sizes.

Get this quality stainless steel syrup filter tank available in different sizes.

Get this quality stainless steel syrup filter tank available in different sizes.

Use this glucose to make your maple by-products.

Use this glucose to make your maple by-products.

Get this level support to adjust the slope of your master line.

Use this glucose to make your maple by-products.

Replace your defective T-selle by this cap.

The CDL Hobby evaporator is designed for recreational producers who want to enjoy springtime, while boiling small quantities of maple sap to produce a few gallons of maple syrup per season.

Evap-O-Grill is ideal for up to 50 taps and for evaporation up to 7 gallons of water per hour.

Maintain a tension between pipes to keep them at a good level in order to ease the flow of maple sap.

Tighten the fasteners to hold the main line on the wire thanks to this automatic twister.

Use this polyester filter for maple syrup.

Set up the main line with this indispensable manual twisting tie tool.

Use this polyester filter for maple syrup.

This small spout remover is perfect to remove your spouts easily.

This small spout remover is perfect to remove your spouts easily.

This small spout remover is perfect to remove your spouts easily.

5/16" universal end of line multi stage T with its end of line connector and its closed end will reduce vacuum loss at the 5/16" head. Has barbs on each end to increase durability and staying power during season.

This soap is used in maple syrup production by certified organic producers.

Designed for the carbon wire ( see BMR code 079-0413) and can be used with regular wire.

End of line adaptor with cap Maxflow. Spout adapters allow you to reuse and extend the life of your permanent spouts while maximizing efficiency.

Ensure a thorough cleaning of your membranes with this powdered citric acid, specially designed for maple syrup production. It gently removes mineral deposits and impurities, maintaining optimal filtration performance. Ideal for maple syrup producers, it extends membrane lifespan and ensures consistent production quality. Easy to use and compliant with current standards, it integrates seamlessly into the cleaning protocols of maple sugaring filtration systems.

5/16" clear adaptor with thin wall. Spout adapters allow you to reuse and extend the life of your permanent spouts while maximizing efficiency. 5/16" drill bit for tapping recommended.

Use this 5 microns pre-filter cartridge for reverse osmosis.

CDL Signature spouts are the perfect choice for your sugar bush.

Use this 5 microns pre-filter cartridge for reverse osmosis.

CDL Signature spouts are the perfect choice for your sugar bush.

Use this 5 microns pre-filter cartridge for reverse osmosis.

This tool will be very useful to you when installing pipes in your sugar bush.

Maxflow 5/16" spout with barbs with its surprising sealing on tap and on 5/16" tubing will ensure a vacuum and a optimum yield. We recommend the use of the 19/64" drill bit for tapping. ** Please note that this product may not be available individually from your store. **

This repair wire with its robust design alows to be used on different kinds of cable and withstands years well.

Maxflow 5/16" spout with barbs with its surprising sealing on tap and on 5/16" tubing will ensure a vacuum and a optimum yield. We recommend the use of the 19/64" drill bit for tapping. ** Please note that this product may not be available individually from your store. **