Drills and impact drivers

Diablo’s SPEEDemon Red Granite Carbide Tipped Hammer Drill Bit range provides one of the fastest and longest lasting drilling solutions on the market for concrete, masonry and stone. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes. This range is Impact Strong for increased shank stability and durability in cordless and corded impact and drill drivers.

AvantiPRO masonry drill bits provide top quality performance when drilling into brick or block. This range features a carbide tip for extra durability and longer life in tough applications. Dual flutes remove dust and debris for cleaner holes. AvantiPRO masonry drill bits are only for use with drills in rotary mode.

Diablo’s Tile & Stone Carbide Tipped Drill Bit range provides faster starts and longer life in tile, stone and glass. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground carbide tip design allows for aggressive starts that produce clean holes when drilling into hard materials. The 3-Flat Shank provides extra stability by eliminating spinning in the drill chuck.

AvantiPRO masonry drill bits provide top quality performance when drilling into brick or block. This range features a carbide tip for extra durability and longer life in tough applications. Dual flutes remove dust and debris for cleaner holes. AvantiPRO masonry drill bits are only for use with drills in rotary mode.

AvantiPRO masonry drill bits provide top quality performance when drilling into brick or block. This range features a carbide tip for extra durability and longer life in tough applications. Dual flutes remove dust and debris for cleaner holes. AvantiPRO masonry drill bits are only for use with drills in rotary mode.

Diablo’s Tile & Stone Carbide Tipped Drill Bit range provides faster starts and longer life in tile, stone and glass. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill fast, accurate holes. The multi-ground carbide tip design allows for aggressive starts that produce clean holes when drilling into hard materials. The 3-Flat Shank provides extra stability by eliminating spinning in the drill chuck.

Featuring a carbide tip that maximizes surface contact and a U-flute to clear debris, DEWALT SDS Max Masonry Drill Bits aren't just fast, they're ultra-durable. An open-head design channels dust into flutes for efficient drilling, and a hardened core helps to reduce bit breakage.

Diablo’s Multi-Material Carbide Tipped Hammer Drill Bit range provides faster starts and longer life in tile, masonry, concrete, wood and metal. Optimized with a unique brazing and hardening process, the carbide tip extends life and productivity, allowing users to drill faster holes. The multi-ground Grip Point tip design allows for aggressive starts that produce clean, fast holes in a variety of applications.

SDS Plus 2 Cutter Drill Bits have a strong tapered core to help resist flute breaks, especially when drilling deep holes. The two-stage flute design features a variable helix pattern that quickly moves debris away from the contact zone.

Designed for heavy duty professional use, the SwitchBlade replacement blades maximizes productivity by eliminating downtime and the cost to resharpen. The replacement blades are made with hardened steel to increase bit life. The size is engraved on each blade.

Designed for heavy duty professional use, the SwitchBlade replacement blades maximizes productivity by eliminating downtime and the cost to resharpen. The replacement blades are made with hardened steel to increase bit life. The size is engraved on each blade.

Designed for heavy duty professional use, the SwitchBlade replacement blades maximizes productivity by eliminating downtime and the cost to resharpen. The replacement blades are made with hardened steel to increase bit life. The size is engraved on each blade.

Designed for heavy duty professional use, the SwitchBlade replacement blades maximizes productivity by eliminating downtime and the cost to resharpen. The replacement blades are made with hardened steel to increase bit life. The size is engraved on each blade.

Designed for heavy duty professional use, the SwitchBlade replacement blades maximizes productivity by eliminating downtime and the cost to resharpen. The replacement blades are made with hardened steel to increase bit life. The size is engraved on each blade.

Designed for heavy duty professional use, the SwitchBlade replacement blades maximizes productivity by eliminating downtime and the cost to resharpen. The replacement blades are made with hardened steel to increase bit life. The size is engraved on each blade.

The Milwaukee Adjustable Hole Cutter Replacement Blade and Pilot Bit set offers replaceable components for the Adjustable Hole Cutter (49-56-0320). Included in the set are two replacement blades, a replacement pilot drill bit, and a hex key to easily replace parts. The replacement blades are optimized for quick and smooth cuts. Chose the Milwaukee Adjustable Hole Cutter Replacement Blades and Pilot Bit set for applications in drywall and ceiling tiles.

Milwaukee M/2 2 cutter SDS Plus rotary hammer drill bits are the most durable 2 cutter bits. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Additionally, M/2 features centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and reinforced flute for durability and minimized vibration.

Milwaukee SHOCKWAVE Impact Duty 30° knuckle pivoting bit holder allows users to drive fasteners and drill holes in tight, difficult work areas. Its innovative, compact design locks at a 0° or 30° angle and is designed for use with SHOCKWAVE Impact Duty 1/4" hex accessories. It is rated to handle up to 2,000 in lbs of torque in impact drivers . The 30° knuckle is engineered with Milwaukee SHOCKWAVE Impact Duty technology which is built for extreme durability and up to 10x life.

The Milwaukee 5 pk Phillips reduced collated magazine bits are designed for dedicated use with the Milwaukee collated magazine attachment (49 20 0001). They are made of premium grade S2 tool steel for longer bit life. The #2 Phillips reduced tip allows for better screw engagement and minimizes stripping.

Shockwave Impact Driver Bits are engineered to be the Most Durable, Best Fitting driver bits on the market. The Wear Guard Tip delivers increased wear resistance which protects the fit over the life of the bit. The Shockzone is optimized for  for each tip type and length of driver bit to absorb peak torque and prevent breaking. The Custom Alloy76 has a customized steel and heat treatment per tip type to extend the life of the driver bits, providing up to 50X life vs. competitive impact driver bits. Shockwave driver bits are built to deliver extreme durability for the most demanding applications.

Milwaukee MX4 4 Cutter SDS Plus rotary hammer drill bits provide up to 4x life in rebar and up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards and 4 cutter 90° head design provide increased life and durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Additionally, MX4 features centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and reinforced flute for durability and minimized vibration.

Milwaukee MX4 4 Cutter SDS Plus rotary hammer drill bits provide up to 4x life in rebar and up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards and 4 cutter 90° head design provide increased life and durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Additionally, MX4 features centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and reinforced flute for durability and minimized vibration.

Milwaukee Thunderbolt pilot bits are designed for XTRM durability and long life. The Thunderbolt web features thicker core than standard pilot bit, which provides ultimate strength and protects against side load breakage. specially designed parabolic flute form clears chips and debris fast to keep the bit cool. precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes.

The Milwaukee SWITCHBLADE Selfeed bit drills up to 12% faster and delivers up to 2X longer life. Designed for any trade that demands repetitive cutting of large holes in wood, switchblade bits allow you to remove and replace blades rather than resharpen. You get new bit with every quick, convenient change of the hardened steel blade, and less downtime on the job. An aggressive feed screw design enables the bit to pull through quickly for faster drilling.

The Milwaukee SWITCHBLADE Selfeed bit drills up to 12% faster and delivers up to 2X longer life. Designed for any trade that demands repetitive cutting of large holes in wood, switchblade bits allow you to remove and replace blades rather than resharpen. You get new bit with every quick, convenient change of the hardened steel blade, and less downtime on the job. An aggressive feed screw design enables the bit to pull through quickly for faster drilling.

Drill into clean or nail embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through center cutting design creates a more solid striking point against nails compared to the competitions' ahead of center and behind center designs.

Drill into clean or nail embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through center cutting design creates a more solid striking point against nails compared to the competitions' ahead of center and behind center designs.

Utilizing advanced Carbide technology, the new Big Hawg with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger Carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. Big Hawg with Carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.

The Milwaukee SWITCHBLADE Selfeed bit drills up to 12% faster and delivers up to 2X longer life. Designed for any trade that demands repetitive cutting of large holes in wood, switchblade bits allow you to remove and replace blades rather than resharpen. You get new bit with every quick, convenient change of the hardened steel blade, and less downtime on the job. An aggressive feed screw design enables the bit to pull through quickly for faster drilling.

The Milwaukee SWITCHBLADE Selfeed bit drills up to 12% faster and delivers up to 2X longer life. Designed for any trade that demands repetitive cutting of large holes in wood, switchblade bits allow you to remove and replace blades rather than resharpen. You get new bit with every quick, convenient change of the hardened steel blade, and less downtime on the job. An aggressive feed screw design enables the bit to pull through quickly for faster drilling.

Utilizing advanced Carbide technology, the new Big Hawg with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger Carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. Big Hawg with Carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.

Utilizing advanced Carbide technology, the new Big Hawg with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger Carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. Big Hawg with Carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.

Utilizing advanced Carbide technology, the new Big Hawg with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger Carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. Big Hawg with Carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.

Milwaukee Big Hawg with Carbide teeth is first to market in providing XTRM life and durability in both nail embedded wood and abrasive material applications. Utilizing advanced Carbide technology, the new Big Hawg with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails.

Utilizing advanced Carbide technology, the new Big Hawg with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger Carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. Big Hawg with Carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.

Milwaukee M/2 2 cutter SDS Plus rotary hammer drill bits are the most durable 2 cutter bits. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction. Additionally, M/2 features centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and reinforced flute for durability and minimized vibration.

Utilizing advanced Carbide technology, the new Big Hawg with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger Carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. Big Hawg with Carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.

Utilizing advanced Carbide technology, the new Big Hawg with Carbide teeth gives users 50x life in demanding applications with the ability to cut 1000+ more nails. 10X larger Carbide teeth rip through materials 5X faster while deeper slots make for fast and easy plug removal. Big Hawg with Carbide teeth allows users to cut through the toughest materials including nails, cement board, shingles, plaster and stucco.

The Milwaukee Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue.

The Milwaukee Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue.

The Milwaukee Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue.

The MILWAUKEE RED HELIX Cobalt Drill Bits are engineered for extreme durability and longer life in hard metal applications. They are designed with a VARIABLE HELIX that includes an aggressive 35° Helix Angle which ends at 15°. The drill bits have QUADEDGE TIP to decrease heat buildup and drill faster. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes in Hard Metal, PVC and wood.

The MILWAUKEE RED HELIX Cobalt Drill Bits are engineered for extreme durability and longer life in hard metal applications. They are designed with a VARIABLE HELIX that includes an aggressive 35° Helix Angle which ends at 15°. The drill bits have QUADEDGE TIP to decrease heat buildup and drill faster. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes in Hard Metal, PVC and wood.

The Milwaukee Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue.

The MILWAUKEE RED HELIX Cobalt Drill Bits are engineered for extreme durability and longer life in hard metal applications. They are designed with a VARIABLE HELIX that includes an aggressive 35° Helix Angle which ends at 15°. The drill bits have QUADEDGE TIP to decrease heat buildup and drill faster. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes in Hard Metal, PVC and wood.

The MILWAUKEE RED HELIX Cobalt Drill Bits are engineered for extreme durability and longer life in hard metal applications. They are designed with a VARIABLE HELIX that includes an aggressive 35° Helix Angle which ends at 15°. The drill bits have QUADEDGE TIP to decrease heat buildup and drill faster. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes in Hard Metal, PVC and wood.

Simpson Strong-TieA driver bits are now color-coded to make size and type selection easier. Available in 6-lobe, square and hex drive, these driver bits have color bands that make choosing the correct size for your fasteners a breeze. Our industrial-grade driver bits are specially designed for a secure fit with Simpson Strong-Tie fasteners and will outperform sub-standard bits commonly prone to cam-out and stripping.

Simpson Strong-TieA driver bits are now color-coded to make size and type selection easier. Available in 6-lobe, square and hex drive, these driver bits have color bands that make choosing the correct size for your fasteners a breeze. Our industrial-grade driver bits are specially designed for a secure fit with Simpson Strong-Tie fasteners and will outperform sub-standard bits commonly prone to cam-out and stripping.