- DEWALTTitanium Split Point Drill Bit - 1/16" x 0.88" x 1.88" - 2/packCoated in heavy-duty titanium nitride for long life and equipped with a 135-degree speed tip that helps to reduce walking, DEWALT Titanium Nitride Coated Drill Bits are ideal for drilling light-gauge metals.$5.48
- In stock
- 7 to 10 day pickup
- IRWINIrwin Speedbor Drill Bit ExtensionDrill through thick wood blocks with this Irwin Speedbor drill bit extension. The shank holds spade drill bits, which are useful for creating holes in lumber or boards. The added length of this drill extension gives you the reach you need to drill into recessed areas or to go through thicker blocks. An included Allen key allows you to tighten the extension so that the bit stays in place even at high speeds.$7.98
- IRWINIrwin Speedbor Drill Bit Extension - 1/4" x 12"Drill through thick wood blocks with this Irwin Speedbor drill bit extension. The shank holds spade drill bits, which are useful for creating holes in lumber or boards. The added length of this drill extension gives you the reach you need to drill into recessed areas or to go through thicker blocks. An included Allen key allows you to tighten the extension so that the bit stays in place even at high speeds.$9.98
- In stock
- In-store pickup
- Truck delivery
- IRWINIrwin Speedbor Drill Bit Extension - 1/4" x 6"Drill through thick wood blocks with this Irwin Speedbor drill bit extension. The shank holds spade drill bits, which are useful for creating holes in lumber or boards. The added length of this drill extension gives you the reach you need to drill into recessed areas or to go through thicker blocks. An included Allen key allows you to tighten the extension so that the bit stays in place even at high speeds.$7.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- MIBROTitanium Nitride Coated Drill Bit Set - 21 PiecesUse for repetitive drilling in most ferrous and nonferrous metals, plastic, and wood.$30.98
- In stock
- In-store pickup
- Truck delivery
- MIBROHigh-Speed Steel Drill Bit Set - 21 PiecesAll-purpose drill bit, for general use in wood, metal, and plastic. Set of 21 high-speed drill bits for do-it-yourself use in most ferrous and nonferrous metals, plastic, and wood. For a better grip in the drill chuck, all sizes 3/16 in (4.76 mm) in diameter and larger have three flats on the bit's shank.$30.98
- In stock
- In-store pickup
- Truck delivery
- MIBROTitanium Nitride Coated Drill Bit Set - 13 PiecesUse for repetitive drilling in most ferrous and nonferrous metals, plastic, and wood$13.98
- In stock
- In-store pickup
- Truck delivery
- MIBROHigh-Speed Steel Drill Bit Set - 13 PiecesAll-purpose drill bit, for general use in wood, metal, and plastic$13.98
- In stock
- In-store pickup
- Truck delivery
- MIBROCountersinkFor use on soft metals, wood, and plastic$4.48
- In stock
- In-store pickup
- Truck delivery
- MIBROCountersinkFor use on soft metals, wood, and plastic$3.98
- In stock
- In-store pickup
- Truck delivery
- MIBROCountersinkFor use on soft metals, wood, and plastic$3.98
- In stock
- In-store pickup
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 1/2" x 10" x 12"These SDS two-knife drills have a thick conical core that prevents chip breakages, especially for deep drilling. Their progressive helical threading and two-stage flutes ensure optimal drilling speed while swiftly removing debris from the contact point. Their two sharp and cutting-edge knives create neat and regular holes for a secure anchoring.$19.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 5/8" x 6" x 8"These SDS two-knife drills feature a thick conical core that resists chip breakages during deep drilling. Their progressive helical threading and two-stage flutes allow for optimal drilling speed by quickly evacuating residues from the contact area. Their two sharp cutting-edge knives ensure clean and regular holes for a secure installation of anchors.$23.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 3/16" x 6 1/2" x 8 1/2"The thick conical core of these SDS two-knife drills is designed to avoid chip breakages, especially during deep drilling. Their progressive helical threading and two-stage flutes allow for optimal drilling speed by quickly eliminating residues from the contact area. Their two sharp and cutting-edge knives guarantee clean and regular holes for a secure installation of anchors.$12.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 3/8" x 4" x 6"SDS double-knife drills stand out for their resistant conical core, ideal for avoiding breakages during deep drilling. Thanks to the two-stage flutes and progressive helical threading, debris is quickly evacuated, ensuring optimal drilling speed.$11.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALT6 "Heavy Duty Spade Bit Kit- 6 PiecesThese DEWALT Spade Bits feature Extreme Speed Channels for fast chip removal and heavy-duty shanks for durability. This set includes six commonly used spade drill bit sizes to for variety of applications. The dual, precision-ground cutting edges deliver maximum speed and performance. The patented corner design helps preserve life and protect against nail impact. A 1/4 in. ball groove shank is compatible with most drills. Heavy-duty wood boring bit set. Max Life corner for longer life in nails and extreme speed channel for fast chip removal. Heavy-duty shank for superior durability. 1/4" ball groove shank for quick bit changes.$25.98
- In stock
- In-store pickup
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 5/8" x 10" x 12"These SDS two-knife drills have a thick conical core preventing chip breakages, particularly for deep drilling. Their progressive helical threading and two-stage flutes promote optimal drilling speed by quickly evacuating debris from the contact site. Their two sharp and honed knives ensure regular and clean holes for a secure installation of anchors.$30.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 1/4" x 6 1/2" x 8 1/2"These SDS two-knife drills have a thick conical core preventing chip breakages, especially in the case of deep drilling. Their progressive helical threading and two-stage flutes promote optimal drilling speed by instantly eliminating residues from the contact area. Their two sharp and honed knives guarantee clean and regular holes for a secure installation of anchors.$10.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALT14 Piece Titanium Speed Tip Drill Bit SetIMPACT READY titanium drill bit set of 14 pieces with exclusive PILOT POINT tip deliver speed and clear, burr-free holes.$44.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 1" x 8" x 10"These SDS two-knife drills have a thick conical core designed to prevent chip breakages, especially during deep drilling. Their progressive helical threading and two-stage flutes ensure optimal drilling speed by instantly evacuating debris from the contact site. Their two sharp and cutting-edge knives enable clean and regular holes for a secure anchoring.$45.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 7/8" x 6" x 8"These SDS two-knife drills have a thick conical core that prevents chip breakages, particularly in the case of deep drilling. Their progressive helical threading and two-stage flutes promote optimal drilling speed by quickly clearing waste from the contact point. Their two sharp and honed knives create neat and regular holes for a secure installation of anchors.$44.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 1/2" x 6 1/2"These SDS double-knife drills are distinguished by their resistant conical core, ideal for avoiding breakages during deep drilling. Thanks to the two-stage flutes and progressive helical threading, debris is quickly evacuated, guaranteeing optimal drilling speed.$13.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 3/16" x 4 1/2" x 6 1/2"Thanks to their thick conical core that prevents chip breakages, especially during deep drilling, these SDS two-knife drills are highly efficient. Their drilling speed is optimal due to the two-stage flutes and progressive helical threading that quickly remove waste from the contact point.$7.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 1/2" x 4" x 6"These SDS two-knife drills stand out for their resistant conical core, designed to avoid breakages during deep drilling. The two-stage flutes and progressive helical threading ensure rapid debris expulsion, optimizing drilling speed.$12.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTSDS Plus Drill Bit - 2 Cutter - 5/16" x 4" x 6"These SDS double-knife drills stand out for their robust conical core, ideal for resisting breakages during deep drilling. The two-stage design of the flutes and progressive helical threading ensure rapid debris evacuation, guaranteeing optimal drilling speed.$10.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTDrill Bit And Screwdring Bit Set Flextorq Impact Ready100 piece Drill Bit and Driver Bit accessory set. Case system designed to optimize storage space and keep your bits organized.$69.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- ALBERTBEETAP : Solid cutting wax lubricant - Heavy DutySolid cutting wax lubricant for all machining operations : Sawing, drilling, tapping, nibbling and shearing of steel, stainless steel and other alloys.$13.98
- ALBERTBEETAP : Solid cutting wax lubricant - Heavy Duty - 90 gSolid cutting wax lubricant for all machining operations : Sawing, drilling, tapping, nibbling and shearing of steel, stainless steel and other alloys.$26.95
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- ALBERTBEETAP : Solid cutting wax lubricant - Heavy Duty - 60 gSolid cutting wax lubricant for all machining operations : Sawing, drilling, tapping, nibbling and shearing of steel, stainless steel and other alloys.$13.98
- In stock
- 7 to 10 day pickup
- Parcel delivery
- DEWALTRight Angle Attachment For Impact DrillProvides better accessibility for screwing and drilling in tight spaces thanks to its compact 1.5 in head and metal gearbox.$37.99
- In stock
- In-store pickup
- Truck delivery
- DEWALTFlextorq # 2 Sq Bits, Pack Of Ten With CarabinerFlextorq # 2 Sq Bits, Pack Of Ten With Carabiner$14.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- FREUD DIABLODIABLO adapter nut setChoose these adapter nuts for your Diablo hole saws, which cut faster and are more productive than ordinary bimetallic blades.$7.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- FREUD DIABLODIABLO pilot drill bitThese drills are perfect for drilling wood, aluminum, metal and stainless steel.$7.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- FREUD DIABLODiablo cobalt pilot bitThese drills are perfect for drilling hardened metals, cast iron and stainless steel.$11.98
- In stock
- 7 to 10 day pickup
- Parcel delivery
- FREUD DIABLODiablo mandrel kitThe design of this Diablo chuck simplifies the fastening process for quick and efficient mounting of the hole saw.$21.98
- FREUD DIABLODiablo mandrel kit - 7/16"The design of this Diablo chuck simplifies the fastening process for quick and efficient mounting of the hole saw.$24.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- FREUD DIABLODiablo mandrel kit - 3/8"The design of this Diablo chuck simplifies the fastening process for quick and efficient mounting of the hole saw.$21.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTFlexTorq bitsThese FlexTorq bits deliver exceptional performance at the height of DEWALT accessories.$9.97 $14.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- DEWALTFlexTorq square bitsThese FlexTorq bits deliver exceptional performance at the height of DEWALT accessories.$9.97 $14.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
-
- STANLEYOxide bit - 1/2" x 12"Get this robust Oxide bit for deep holes.$29.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- STANLEYOxide bit - 7/16" x 12"Get this robust Oxide bit for deep holes.$24.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- STANLEYOxide bit - 3/8" x 12"Get this robust Oxide bit for deep holes.$20.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- STANLEYOxide bit - 5/16" x 12"Get this robust Oxide bit for deep holes.$17.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- STANLEYOxide bit - 3/16" x 12"Get this robust Oxide bit for deep holes.$11.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- STANLEYOxide bit - 1/4" x 12"Get this robust Oxide bit for deep holes.$12.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- STANLEYOxide bit - 1/8" x 12"Get this robust Oxide bit for deep holes.$8.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery
- CAMODriver Bit – MARKSMAN - T5 - 3" - 2/pkgThe MARKSMAN driver bits are designed for use with Marksman tools and can be inserted into any drill for immediate work, allowing efficient and precise screw installation. With a 3-inch (76.2 mm) length and a T-15 star drive, they provide an optimal fit while minimizing the risk of slipping.$8.98
- In stock
- In-store pickup
- Parcel delivery
- Truck delivery












































