Corded And Cordless Power Tools

The M18 compact vacuum provides users with the most powerful & adaptable handheld cleanup tool. A high performance motor creates best in class suction for cleanup of drywall dust, wood/metal shavings, and common jobsite debris. With a unique handheld design, the M18 compact vacuum can be used in a wide variety of orientations and applications across the jobsite.

The Milwaukee AIR TIP flexible long reach crevice tool gets into hard to reach places with a flexible rubber shaft design. The flexible rubber shaft can bend along the crevice tool to reach into difficult, awkward cleaning situations. The long crevice tool has a flexible shaft over 16 inches in length, making cleaning in tight areas more accessible.

The Milwaukee AIR TIP cross brush tool makes cleaning easier with a cross design that prevents brushes from pushing debris away, eliminating clogging. The Cross Brush Tool can agitate, release, and clean hard to get material from surfaces. The bristles will not mar or scratch surfaces to quickly clean without causing damage to finished surfaces.

The Milwaukee AIR TIP rocking utility nozzle with brushes makes handheld cleanup easier. The bevels on either side of the nozzle and brushes all around the tool ensure it won’t get stuck to surfaces when cleaning in a rocking motion. The bristles can be used in finished areas or when agitating debris for removal.

The Milwaukee AIR TIP magnetic utility nozzle has integrated magnets that catch metal hardware, preventing damage to bags and filters inside of a wet/dry vacuum.

The Milwaukee AIR TIP rocking utility nozzle with brushes makes handheld and upright cleanup easier. The bevels on either side of the nozzle and brushes all around the tool ensure it won’t get stuck to surfaces when cleaning in a rocking motion. This vacuum accessory can be used with 2 1/2" extension wands for greater reach.

The Milwaukee AIR TIP rotating corner brush tool easily goes into corners with its spade shaped tip for deep corner cleaning. The agitating brushes on the tip easily remove debris in stubborn corners. The 360 degree rotating brush head enhances the cleaning experience when pushing or pulling in challenging areas like elevated inside corners. The AIR TIP Rotating Corner Brush Tool is part of the AIR TIP family of Trade Focused Vacuum Accessories.

The Milwaukee AIR TIP non marring utility nozzle kit has non marring edges to protect surfaces from getting marred when cleaning. A specialized resin allows each tip to be used on finished surfaces without marking up the area. The kit includes a Crevice Tool and Utility Nozzle, which both have non marring edges indicated by the black surface.

The Milwaukee AIR TIP low profile pivoting brush tool has greater cleaning access in a variety of cleaning situations with its pivoting design and low profile head. The pivoting joint is easy to engage with a button press, so multiple orientations of cleaning overhead, waist level, or below can be achieved. In addition, the low profile brush head can swivel 360 degrees for even more cleaning versatility.

The Milwaukee AIR TIP dust collector collects dust with its rubber seal that maintains suction to a wall for less cleanup time later. After connecting the dust collector to a wet/dry vacuum, it uses the vacuum's suction so professionals can attach it to a wall for hands free work. Cut or drill above the funnel design while the vacuum is on to capture more debris. The rubber seal maintains suction throughout the application putting less dust in the air, on the ground and freeing up a hand that would otherwise be holding a vacuum nozzle. The AIR TIP Dust Collector iis part of the AIR TIP family of Trade Focused Vacuum Accessories.

The MILWAUKEE M18 FUEL PACKOUT 2.5 Gallon Wet/Dry Vacuum is the most powerful small capacity 18V wet/dry vacuum, fully compatible with the Milwaukee PACKOUT Modular Storage System. Its POWERSTATE brushless motor delivers up to 60% more suction for powerful performance to easily clean up common wet and dry jobsite debris. PACKOUT compatibility gives this cordless wet/dry vac unmatched mobility, saving downtime spent hauling tools on and off the jobsite.

The M18 2 Gallon wet/dry vacuum provides users with a powerful and portable wet/dry clean up tool. A high performance motor creates powerful suction for both wet and dry applications. Its stackable design and organized on board storage keeps all of the attachments inside the unit for convenient transport and storage.

The MILWAUKEE Fleece Dust Bags are compatible with the Milwaukee M18 FUEL 6 Gallon Wet/Dry Vacuum. With 98.5% filter efficiency, these disposable fleece dust bags are ideal for fine dust collection. The vacuum cleaner dust bags are fully enclosed and act as a pre filter to prolong filter life and are easy to dispose of with the pull tab to prevent dust from escaping.

The MILWAUKEE M12 AIR TIP Utility Nozzle makes jobsite cleanup easier with a powered brush roll that agitates debris for deep cleaning applications. The powered brush roll turns on at the push of a button and is powered by an M12 REDLITHIUM Battery. Paired with a vacuum that is turned on, the Utility Nozzle will be able to clean up more debris in one pass for increased productivity. A suction control valve allows for ease of use on carpets and substrates.

The M18 FUEL 6 Gallon Wet/Dry Vacuum brings unmatched performance, durability, and versatility to jobsite cleanup. The POWERSTATE Brushless Motor and optimized components Outperform 3.5 Peak HP Wet/Dry Vacuums, delivering more cleaning power than corded. The wet/dry vac cleans up more common jobsite debris like drywall dust, concrete dust, and wood/metal.

HEPA Cartridge Filter for 5, 8, & 10 US Gallon (20L, 30L & 40L) Vacuums. The King Canada replacement HEPA cartridge filter is a high efficiency filter for fine dust like cement and drywall, as well as to clean ash from fireplaces, wood. stoves, pellet stoves and barbecues. Washable and reusable filters save you money.

High efficiency cartridge filter for plaster dust. Fits vacuum models 8520LP (5 gal,20 l), 8530LPN (8 gal,30 l), 8540LST (10 gal,40 l).

The DCE555 20V MAX Drywall Cut-Out Tool features a 26,000 rpm brushless motor which helps enable fast and clean cutting on a variety of wall paneling. The tool features tool-free bit change, enabling fast and secure bit and collet changes without the need for a wrench. The tool also includes a forward-positioned on-off button which is designed for easy and ergonomic use.

The 20V MAX XR cordless compact router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LEDs help illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base change.

The MILWAUKEE M18 FUEL Compact Router combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The compact router uses the POWERSTATE Brushless Motor and REDLINK PLUS electronics. This delivers the power of corded 1.25 horsepower trim routers and 31,000 RPM, giving the power and speed for clean, quality cuts in hard materials. With an M18 REDLITHIUM XC5.0 battery, the cordless compact router cuts up to 250ft of 3/8" roundovers in red oak, providing all day run time with fewer trips to the charger.

This compact, portable and powerful cutoff solution for the professional offers up to 10X longer life and 10% more speed. Get the power of a corded rotary tool in the M12 Rotary Tool, which integrates high-performance motor design, optimized electronics and REDLITHIUM battery technology for exceptional power and durability.

Makita's DCO180Z, 18V LXT Li-Ion Cordless Cut-Out Tool is a powerful and efficient solution for drywall contractors, with the cutting performance and power of a corded tool but without the hassles of a cord.

With this router, you will have the power to pass smoothly through the toughest hardwoods.

135 pc. accessory kit comes with assorted accessories, 40" flex. shaft, height adjustable stand with adjustable clamp, collet nut adjustment key and sturdy carrying case

Diablo's diamond segmented masonry cut-off discs provide extreme durability and longer life in concrete, concrete with rebar, brick and cinder block. These diamond rimmed discs deliver up to 2X longer cutting life versus standard diamond cut-off discs. The disc's industrial-grade diamonds with hardened disc body delivers lasting durability and maximizes cutting quality in hardened materials even in extreme applications.

Diablo's premium Metal Cut-Off Disc provides premium performance and increases productivity. Diablo's Thin Kerf design provides for a thin cut, allowing your power tool to work at its full potential. This disc is designed for use in angle grinders and is ideal for all types of metal/stainless steel materials.

Diablo's diamond segmented masonry cut-off discs provide extreme durability and longer life in concrete, concrete with rebar, brick and cinder block. These diamond rimmed discs deliver up to 2X longer cutting life versus standard diamond cut-off discs. The disc's industrial-grade diamonds with hardened disc body delivers lasting durability and maximizes cutting quality in hardened materials even in extreme applications.

Diablo's diamond segmented masonry cut-off discs provide extreme durability and longer life in concrete, concrete with rebar, brick and cinder block. These diamond rimmed discs deliver up to 2X longer cutting life versus standard diamond cut-off discs. The disc's industrial-grade diamonds with hardened disc body delivers lasting durability and maximizes cutting quality in hardened materials even in extreme applications.

Diablo's premium Metal Cut-Off Disc provides premium performance and increases productivity. Diablo's Thin Kerf design provides for a thin cut, allowing your power tool to work at its full potential. This disc is designed for use in angle grinders and is ideal for all types of metal/stainless steel materials.

Diablo's premium high speed masonry cut-off discs provide superior performance and increased productivity. Featuring a premium silicone carbide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

Diablo's diamond continuous rim masonry cut-off discs provide cleaner and precise cuts in granite, marble, porcelain and tile. The disc's industrial-grade diamonds with hardened disc body delivers lasting durability and maximizes cutting quality in hardened materials even in extreme applications.

Diablo's premium high speed masonry cut-off discs provide superior performance and increased productivity. Featuring a premium silicone carbide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

Install your miter saw on this heavy duty stand wich can be easily transported.

Diablo's premium high speed masonry cut-off discs provide superior performance and increased productivity. Featuring a premium silicone carbide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

The 60V MAX* 12-inch Sliding Miter Saw features regenerative braking technology for extended battery life. It can make up to 675 cuts on 3 1/4-inch MDF moldings or 255 cuts on pressure-treated 4x4 pine with just one DEWALT FLEXVOLT® DCB609 battery. This saw boasts an efficient transmission and captures up to 94% of dust. The CUTLINE™ system precisely indicates the cutting line. The controls are redesigned for improved ergonomics. The tool alone weighs 50.9 lbs, making it easy to transport on challenging job sites. Includes: 1 battery 001-0106 and a charger.

This is a three pack of 3" x .040 x 3/8" cut off wheels. rated for a maximum 20,000 RPM this wheel is an ideal solution for cutting stainless and other metals quickly and efficiently. Milwaukee’s comprehensive offering of grinding and cutting wheels consists of 45 unique products ranging in diameters from 3" to 14" with arbor configurations of 3/8 in., 7/8 in., 20 mm, and 5/8 in..

Diablo's premium high speed masonry cut-off discs provide superior performance and increased productivity. Featuring a premium silicone carbide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

Diablo premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra-long cutting life. Fully reinforced for use in hand-held cut-off work.

The Milwaukee 49 94 3010 is a 3" Diamond tile blade intended to cut ceramic or porcelain tiles, either wet or dry, when partnered with the M12 fuel 3" Compact cut off tool (2522). The 3" blade diameter makes it easy for the user to maneuver the blade to make notch and rounded cuts to fit tiles as required.

Diablo's premium Metal Cut-Off Disc provides premium performance and increases productivity. Diablo's Thin Kerf design provides for a thin cut, allowing your power tool to work at its full potential. This disc is designed for use in angle grinders and is ideal for all types of metal/stainless steel materials.

Designed for the professional carpenter, remodeler and general contractor, the M18 FUEL 12" sliding miter saw can generate the power of a 15-amp corded saw while weighing in at up to 15% lighter than leading competitive saw and up to 330 cuts per charge. With the same capacity as AC 12" miter saw the 2739 provides users all ability to perform all of their critical applications while increase portability, efficiency and productivity on site.

The M18 FUEL 10" dual bevel sliding compound miter saw was designed to meet the demanding needs of professional carpenters and remodelers. Delivering greater capacity than many corded 10" sliding miter saws and the POWERSTATE brushless motor delivering corded cutting performance the 2734 provides users a solution to replace their corded miter saws. The REDLITHIUM HD9.0 battery pack delivers up to 400 cuts per charge making the saw capable of lasting an entire day on site with only one pack.

Diablo premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra-long cutting life. Fully reinforced for use in hand-held cut-off work.

Designed for the professional carpenter, remodeler and general contractor, the M18 FUEL 12" sliding miter saw can generate the power of a 15-amp corded saw while weighing in at up to 15% lighter than leading competitive saw and up to 330 cuts per charge. With the same capacity as AC 12" miter saw the 2739 provides users all ability to perform all of their critical applications while increase portability, efficiency and productivity on site.

Diablo's premium Metal Cut-Off Disc provides premium performance and increases productivity. Diablo's Thin Kerf design provides for a thin cut, allowing your power tool to work at its full potential. This disc is designed for use in angle grinders and is ideal for all types of metal/stainless steel materials.

The M18 FUEL 10" dual bevel sliding compound miter saw was designed to meet the demanding needs of professional carpenters and remodelers. Delivering greater capacity than many corded 10" sliding miter saws and the POWERSTATE brushless motor delivering corded cutting performance the 2734 provides users a solution to replace their corded miter saws. The REDLITHIUM XC 8.0 battery pack delivers up to 400 cuts per charge making the saw capable of lasting an entire day on site with only one pack.

Built for quick, precise inflation on the go, this M18 cordless inflator delivers up to 150 PSI for passenger, light truck, and other medium‑duty tires. A high‑efficiency motor can top off 33" light truck tires in under 1 minute. The unit includes memory settings for four pressure presets, a 36" hose with a full-brass Schrader chuck, and anti-vibration feet for stable operation. Integrated storage for the hose and nozzle helps keep the tool organized once the work is done.

The Milwaukee 49 94 3005 is a 3" x Carbide abrasive blade intended to be a general purpose blade paired with the Milwaukee M12 fuel 3" Compact cut off tool (2522). Whether it’s drywall, cement backer board, PVC, plastics, etc. this is blade is a unique solution that delivers the capability to cut a wide range of materials quickly and efficiently.