Corded And cordless power tools

These 135° high strength drills bits work well in very demanding applications. The flats on the shank give a positive grip of the chuck. The drills bits are ideal for use with hand drills with keyless chucks.

Milwaukee metal tech circular saw blades were specifically designed to exceed the expectations of contractors for blade life, cut quality, and speed in the most demanding metal cutting applications – without a lubricant. A hand tensioned, hardened alloy steel body extends blade life and delivers the highest quality cuts available.

Milwaukee metal circular saw blades were specifically designed to exceed the expectations of contractors for blade life, cut quality, and speed in the most demanding metal cutting applications – without a lubricant. A hand tensioned, hardened alloy steel body extends blade life and delivers the highest quality cuts available.

The M18 brushless 7 1/4" circular saw delivers up to 40% more power than circular saws with brushed motors while providing up to 30% more run time as well. The Milwaukee built motor, REDLINK electronics and REDLITHIUM XC5.0 battery provide more efficient power delivery, more power and fewer trips to the charger. With 5,000 RPM that 2631 provides smooth cutting and at only 9.0 lbs. it is lighter than most corded saws.

These 135° high strength drills bits work well in very demanding applications. The flats on the shank give a positive grip of the chuck. The drills bits are ideal for use with hand drills with keyless chucks.

The Tilt Lok handle on Milwaukee's circular saw is the most revolutionary concept for circular saws in years. The eight-position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 Lb. and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side.

These 135° high strength drills bits work well in very demanding applications. The flats on the shank give a positive grip of the chuck. The drills bits are ideal for use with hand drills with keyless chucks.

These 135° high strength drills bits work well in very demanding applications. The flats on the shank give a positive grip of the chuck. The drills bits are ideal for use with hand drills with keyless chucks.

The MILWAUKEE M18 6 1/2" Circular Saw provides users with powerful lightweight cutting for a variety of applications including plumbing, electrical, framing, finishing, and carpentry. The cordless circular saw is a high-performance tool that delivers the most durability in a cordless saw. It has a powerful 3,500 RPM motor to quickly and easily cut through tough material such as LVL headers.

These 135° high strength drills bits work well in very demanding applications. The flats on the shank give a positive grip of the chuck. The drills bits are ideal for use with hand drills with keyless chucks.

These 135° high strength drills bits work well in very demanding applications. The flats on the shank give a positive grip of the chuck. The drills bits are ideal for use with hand drills with keyless chucks.

Circular saw with a Powerful 12 Amp., 5,500 RPM motor.

Using the latest in Lithium Ion technology, this battery provides 3.0 A capacity in a compact form, offering ergonomic benefits for extended power tool use.

This Atomic circular saw can meet all cutting needs.on the job.

These 135° high strength drills bits work well in very demanding applications. The flats on the shank give a positive grip of the chuck. The drills bits are ideal for use with hand drills with keyless chucks.

Ensure accurate drilling in concrete or other masonry products with this drill specially designed for it.

Ensure accurate drilling in concrete or other masonry products with this drill specially designed for it.

Ensure accurate drilling in concrete or other masonry products with this drill specially designed for it.

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

The MARKSMAN driver bits are designed for use with Marksman tools and can be inserted into any drill for immediate work, allowing efficient and precise screw installation. With a 3-inch (76.2 mm) length and a T-15 star drive, they provide an optimal fit while minimizing the risk of slipping.

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

For drilling the most accurate and clean holes in wood and plywood, choose the Milwaukee Brad Point Bit. Milwaukee Brad Point Bits start holes with precision and finish without splinters. The machined tips maintain a sharp cutting edge for longer life on the job. The bits feature 1/4" depth marks for easy visual reference during drilling.

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

For drilling the most accurate and clean holes in wood and plywood, choose the Milwaukee Brad Point Bit. Milwaukee Brad Point Bits start holes with precision and finish without splinters. The machined tips maintain a sharp cutting edge for longer life on the job. The bits feature 1/4" depth marks for easy visual reference during drilling.

This 21-piece titanium-coated drill bit set provides reduced shank design for enhanced drilling performance across various materials. The titanium coating delivers superior durability and extended tool life compared to standard steel bits. Reduced shank construction allows compatibility with standard drill chucks while accommodating larger bit diameters. Ideal for metal fabrication, woodworking, and general drilling applications where precision and longevity are essential.

Coated in heavy-duty titanium nitride for long life and equipped with a 135-degree speed tip that helps to reduce walking, DEWALT Titanium Nitride Coated Drill Bits are ideal for drilling light-gauge metals.

This 24 teeth carbide circular saw blade is perfect for construction.

Perform accurate cuts over long distances by using this cutting guide with circular saws or routers.

Coated in heavy-duty titanium nitride for long life and equipped with a 135-degree speed tip that helps to reduce walking, DEWALT Titanium Nitride Coated Drill Bits are ideal for drilling light-gauge metals.

Solid cutting wax lubricant for all machining operations : Sawing, drilling, tapping, nibbling and shearing of steel, stainless steel and other alloys.

Solid cutting wax lubricant for all machining operations : Sawing, drilling, tapping, nibbling and shearing of steel, stainless steel and other alloys.

Built for fastening in tight or awkward spots, this pivoting bit tip holder uses an articulated joint so the head can angle relative to the shank. A ring collar lets you engage controlled pivoting when clearance is limited, while the knurled sleeve gives a secure grip for quick bit changes. With a hex bit socket up front and a hexagonal shank with retention groove at the rear, it connects to common drivers for cabinetry, hardware assembly, and general repairs.

Keep your Quik Drive Project Pro system operating at peak efficiency with this T25 Replacement Bit. Engineered for durability and precision, this all-in-one bit and mandrel delivers reliable performance when driving collated fasteners through a variety of materials. Whether you're a contractor tackling large-scale jobs or a DIY enthusiast working on home improvements, this replacement bit helps reduce slippage, minimize wear, and ensure smooth, accurate fastening every time. A must-have accessory for consistent results.

The T-10 Star Drive bit is crafted for a stable connection with star drive screws. With six contact points, it minimizes stripping risk and ensures effective tightening for improved productivity. Ideal for DIY and professional projects, this bit facilitates screw installation in hard materials.

The T-10 Star Drive bit provides a secure, slip-free connection for star drive screws. With six contact points, it limits stripping and ensures a firm grip, contributing to quick and efficient installation. Suitable for both professional and DIY projects, this bit optimizes screw installation, even in challenging materials.

Designed for reliable fastening, the T-10 Star Drive bit stands out with its six contact points for star drive screws. This design minimizes stripping risks and ensures precise tightening, optimizing productivity. Perfect for professional and household applications, this bit makes screw installation easier, even in tough materials.

The T-10 Star Drive bit guarantees a strong, non-slip connection with star drive screws. Featuring six contact points, it significantly reduces the risk of stripping, allowing for optimal tightening and increased productivity. Ideal for both professionals and DIYers, this bit simplifies screw installation even in resistant materials, ensuring a smooth and efficient workflow.

The T-10 Star Drive bit is designed to provide a secure, slip-free connection with star drive screws. With its six points of contact, this bit reduces the risk of stripping, ensuring optimal torque and improved productivity. Perfect for professional and DIY projects, this bit enables smoother and more efficient screw installation, even in tough materials.

The 6-point Insider socket set is specifically designed for the M12 FUEL Insider ratchet wrench. With a low-profile design, these sockets provide a drive depth of up to 15 mm (9/16 in), making them ideal for complex tasks. Dual-sided laser markings ensure quick size identification, while the double retention groove system enhances accessibility by allowing insertion from both sides. Featuring optimized geometry to reduce stripping and rounding of bolts, these sockets come with a lifetime manufacturer’s warranty.

The SHOCKWAVE Impact Duty™ magnetic accessory comes with two Phillips no. 2 bits, featuring a magnetized tip for maximum screw retention. The WEAR GUARD TIP technology enhances durability and ensures a precise fit with impact drivers. Compact and practical, the magnetizer sits directly on the shank, providing better visibility and easier access during tasks. Designed for 2-inch bits and larger, it is perfectly compatible with impact drivers and drill drivers.

Offering durability and performance, this SHOCKWAVE Impact Duty™ socket set is designed for high-torque applications. Each socket is made of high-strength forged steel, ensuring excellent grip and reducing wear on fasteners thanks to its anti-slip hex geometry. The stamped and ink-filled size markings allow for quick and easy identification. Delivered in a compact PACKOUT™ organizer with a transparent lid, this set integrates seamlessly into the modular PACKOUT™ storage system, enabling optimized transport and storage. This product meets ASME standards and is backed by a lifetime warranty from the manufacturer.

These two 1/4" drywall cutting bits feature Pilot Point tips, which help you stay on track while drilling. They ensure fast and precise drilling, including precision drilling tasks, while offering good durability.

These multi-material cutting tips provide a robust and effective solution for drilling various surfaces with ease. Obtain the quality and performance necessary to successfully complete all your projects.

These multi-material cutting tips provide a robust and effective solution for drilling various surfaces with ease. They deliver the quality and performance you need for all your projects.

Diablo’s Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. Two-step cutting action for precise, clean holes in wood drilling applications. Dura-Tip for extreme durability in nail-embedded wood. Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood

Diablo’s Auger Bit range provides maximum performance, extreme durability and superior life in nail-embedded wood applications. Two-step cutting action for precise, clean holes in wood drilling applications. Dura-Tip for extreme durability in nail-embedded wood. Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood