ABS pipes

A sanitary tee allows liquids to drain while venting the plumbing system. The downward sweep directs liquid toward the drain pipe.

A sanitary tee allows liquids to drain while venting the plumbing system. The downward sweep directs liquid toward the drain pipe.

Curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A 90˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

Recommended for all non-pressure applications, this kit contains everything needed to prepare and cement ABS pipes. The clear cleaner removes grease and dirt, without staining most surfaces and evaporates quickly. The yellow ABS cement has excellent gap-filling properties for a quick and professional result.

Closet flange with adjustable ring to allow exact positioning and test plug to allow pressure testing the DWV system. Flush fit.

A basic fixed closet flange with integral test plug for use when testing the DWV system.

Closet flange with adjustable ring to allow exact positioning. Flush fit allows the flange to sit flat on the floor without interference with the edge of the entrance hole.

Install this ABS hub flange to your bathroom floor to place the tub.

Install this ABS hub flange to your bathroom floor to place the tub.

Install this ABS hub flange to your bathroom floor to place the tub.

Closet flange with a fixed ring. Spigot end fits inside the hub of a DWV fitting e.g. 90˚ elbow.

Connects the discharge tube from a dishwasher to the under-sink DWV drain system, typically using a wye fitting in the horizontal drain pipe.

The spigot end of this sewer-to-drain adapter bushing connects to the hub end of a PVC sewer fitting and ABS-DWV pipe is connected to the hub end.

This reducer coupling is used to join PVC sewer pipe to ABS-DWV pipe. Depending on the fitting chosen, the sewer pipe can connect to a smaller size ABS pipe.

A union is a handy solution when one ABS pipe needs to be disconnected from another from time to time.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

This continuous waste outlet is a pipe/fittings kit used to connect the drains of two sinks into a single drain line e.g. kitchen double sink draining into a single line. Because they connect directly to the sink strainers, they provide for more space under kitchen cupboards. The center outlet kit is used when the drain line is located between the double sinks.

Allows you to clean out any blockages downstream from a fitting in the drain line

Allows you to clean out any blockages downstream from a fitting in the drain line

Allows you to clean out any blockages downstream from a fitting in the drain line

An ABS to Cast Iron pipe adapter connects ABS pipe to the bell end of a cast iron soil pipe using a flexible rubber adapter or "donut".

Used to connect ABS pipe on the hub end to cast iron pipe using an MJ coupling on the spigot end.

Male trap adapters connect a sink tailpiece directly to the hub end of a fitting e.g. a 90˚ elbow.

Male trap adapters connect a sink tailpiece directly to the hub end of a fitting e.g. a 90˚ elbow.

P-trap with union and cleanout allows easy cleanout of downstream blockages as well as for recovering objects that may have fallen down the sink drain.

Disgorge the pipes with this S-shaped siphon with female plug.

Easily clean or unclog your sink's pipe thanks to the ABS DWV "P"-trap and its cleanout plug.

Easily clean or unclog your sink's pipe thanks to the ABS DWV "P"-trap and its cleanout plug.

Easily clean or unclog your sink's pipe thanks to the ABS DWV "P"-trap and its cleanout plug.

Cleanout plugs are threaded to fit a cleanout adapter or female adapter. A raised square on the cap allows for removal using a wrench if needed.

This adapter connects 4" PVC sewer pipe to 3" ABS-DWV pipe using a solvent cement connection.

Join two pieces of pipe of different diameters with this ABS DWV increaser coupling.

Join two pieces of pipe of different diameters with this ABS DWV increaser coupling.

Join two pieces of pipe of different diameters with this ABS DWV increaser coupling.

Join two pieces of pipe of different diameters with this ABS DWV increaser coupling.

Join two pieces of pipe of different diameters with this ABS DWV increaser coupling.

Join two pieces of pipe of different diameters with this ABS DWV increaser coupling.

Join two pieces of pipe of different diameters with this ABS DWV increaser coupling.

Join two pieces of pipe of different diameters with this ABS DWV increaser coupling.

Use this ABS DWV coupling to join two pieces of the same type and size of pipe together.

Use this ABS DWV coupling to join two pieces of the same type and size of pipe together.

Use this ABS DWV coupling to join two pieces of the same type and size of pipe together.

Use this ABS DWV adapter to convert solvent weld pipe to a threaded connection ** Please note that this product may not be available individually from your store. **