ABS pipes

This adapter permits the connection of copper, steel, or cast iron threaded connectors to ABS pipes. It is used in most plumbing projects for Drain, Waste, and Vent systems (DWV).

Replace all secondary plumbing vent to protect the traps of kitchen sinks, bathroom basins, tubs, showers, or washing machines.

A basic P-trap without union or cleanout intended for use where there will be no access to the trap once installed.

A basic P-trap without union or cleanout intended for use where there will be no access to the trap once installed.

A basic P-trap without union or cleanout intended for use where there will be no access to the trap once installed.

Fits into a PVC sewer fitting to convert to a smaller size ABS-DWV pipe.

Fits into a PVC sewer fitting to convert to a smaller size ABS-DWV pipe.

Fits into a PVC sewer fitting to convert to a smaller size ABS-DWV pipe.

Fits into a PVC sewer fitting to convert to a smaller size ABS-DWV pipe.

Fits into a PVC sewer fitting to convert to a smaller size ABS-DWV pipe.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A cleanout adapter allows you to clean out any blockages downstream from a fitting in the drain line.

A cleanout adapter allows you to clean out any blockages downstream from a fitting in the drain line. Comes with a threaded plug.

A cleanout adapter allows you to clean out any blockages downstream from a fitting in the drain line. Comes with a threaded plug.

P-trap with union is intended for use under sinks where access to the cleanout is available after installation.

P-trap with union is intended for use under sinks where access to the cleanout is available after installation.

P-trap with union is intended for use under sinks where access to the cleanout is available after installation.

This reducer bushing connects to the hub end of an ABS fitting and is threaded to allow for the connection of a smaller size MPT fitting.

Connects the threaded discharge tube from a dishwasher to the under-sink DWV drain system, typically using a wye fitting in the horizontal drain pipe.

Connects the threaded discharge tube from a dishwasher to the under-sink DWV drain system, typically using a wye fitting in the horizontal drain pipe.

Connects the threaded discharge tube from a dishwasher to the under-sink DWV drain system, typically using a wye fitting in the horizontal drain pipe.

A cleanout adapter allows you to clean out any blockages downstream from a fitting in the drain line e.g. a 45˚wye. Does not come with a threaded plug.

Closet flange with adjustable ring to allow exact positioning. Integral test cap for pressure testing the DWV system.

Offset flange allows for extra clearance when obstructions e.g. joists are in the way. Allows for 1.5" offset. Adjustable ring allows exact positioning.

This ABS 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

This ABS 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

This ABS 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

This ABS 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

This ABS 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

This ABS 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

This ABS 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

This ABS 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

A double sanitary tee can be used in a DWV system to connect 2 branch lines into a vertical drain line.

Closet flange with adjustable ring to allow exact positioning. Allow for added radius in the hole in the floor to allow the flange to sit flat.

This ABS DWV 45° curved elbow, allows the evacuation in drainage and vent system. Also used to alter the direction of a pipe run in drainage and vent systems.

Avoid obstacles in your piping trajectory with this 90° ABS DWV elbow.

Avoid obstacles in your piping trajectory with this 90° ABS DWV elbow.

Avoid obstacles in your piping trajectory with this 90° ABS DWV elbow.

A 90˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

Cleanout plugs are threaded to fit a cleanout adapter or female adapter. A raised square on the cap allows for removal using a wrench if needed.

Couplings are short fittings used to join two pieces of the same type and size of pipe together. ** Please note that this product may not be available individually from your store. **

Couplings are short fittings used to join two pieces of the same type and size of pipe together.

A female adapter is used to convert solvent weld pipe to a threaded connection e.g. for connecting to a male threaded fitting.

A 90˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Spigot end connects directly to a DWV fitting.