Chimney accessories

Chooose this increaser to add to the chimney.

This snow splitter is designed to deflect snow and ice. Panels are easily assembled and prevent unnecessary strain or damages to the chimney. The splitter is made from heavy gauge galvanized steel and mounts directly on the roof above the chimney.

This galvanized steel storm collar maintains a weather tight seal between the vent and the roof flashing. Silicone must be applied (not included). Preserves fuel clearance.

This ceiling support is used for the vent system from below the ceiling joist. It maintains a 1″ clearance to combustibles.

This increaser adapter for pellet vent stoves is used to increase the size of the pipe to the chimney. It attaches to 3″ collars and connects to 4″ vent pipes.

This adjustable pellet flashing is used for a waterproof installation through pitched roofs from 0/12 to 6/12 and 6/12 to 12/12. It maintains fuel clearance.

This pellet stove pipe increaser is used to connect a 3″ pellet pipe to a 4″ pellet pipe.

This appliance adapter is used to connect a pellet pipe to the outlet of a pellet stove. The female end adapts to the stove outlet with a leakproof connection.

This 90º elbow for pellet stove is used to orient a pipe between vertical and horizontal orientation. Tight fit reducing leakage.

This 45º elbow for pellet stove is used to orient a pipe between vertical and horizontal orientation. Tight fit reducing leakage.

This T-adapter is used for pellet appliances. It is used as a starting pipe on the exhaust outlet of the appliance. A top silicone gasket connects in seconds to ensure gasket integrity.

Use this chimney to light the charcoal of your barbecue in a safe and fast way.

This vertical chimney cap for pellet stove is designed to keep rain, snow and debris from entering the chimney. Its proven coupling joint connects in seconds to ensure joint integrity. Secure installation.

This galvanized wall thimble is an important component for pellet stove chimneys. It insulates between the pipe and the wall to protect any material from high temperature and risk of fire.

This Flex connector is used to connect a flexible length to female end of a pellet pipe for venting pellets.

This Tee connector is used to transition from horizontal to vertical orientation. It provides easy access for inspection and maintenance. Tee cap included.

This Tee connector is used to transition from horizontal to vertical orientation. It provides easy access for inspection and maintenance. Tee cap included.