Wood screws

These #8 x 1 3/4" zinc-plated steel wood screws are designed for softwood and engineered wood applications. The pan head with square drive delivers strong torque and secure grip during installation. Hi-low threading combined with a sharp wood point ensures fast penetration and reliable holding power. Suitable for framing, cabinetry, decking, and general woodworking projects where corrosion resistance matters.

These #8 x 3 inch zinc-plated wood screws feature a square drive and pan washer head for secure pocket hole joinery. The coarse thread and regular wood point provide strong holding power in softwood and hardwood applications. Designed for angled drilling at 15 degrees, these screws join workpieces without clamping. Glue is recommended but not required. For cabinetry, furniture assembly, and general woodworking projects.

Zinc-plated steel wood screws, #8 gauge by 2 inch length. Specifications include pan washer head, square drive recess, coarse thread pitch, and regular wood point. Intended for pocket hole joinery applications requiring 15-degree angled pilot holes. No clamping required during installation. Adhesive optional for enhanced joint strength. Suitable for interior wood-to-wood fastening in furniture and cabinet assembly applications.

These #8 x 2 1/2" zinc-plated wood screws measure 63.5 mm in length and feature a square drive recess for secure fastening. Designed with a pan washer head, coarse thread, and standard wood point, they excel in pocket hole joinery and angled assembly applications. The coarse thread provides strong holding power in softwoods and plywood. Suitable for furniture building, cabinet assembly, and general woodworking projects requiring reliable wood-to-wood connections.

These #6 x 5/8" zinc-plated steel wood screws are designed for softwood, engineered wood, and particleboard applications. The self-tapping hi-low thread design ensures fast, secure installation without pre-drilling. Each screw features a flat head with countersinking nibs for a flush finish and a square drive recess for improved torque and reduced cam-out. Sharp regular points penetrate material cleanly for reliable fastening in cabinetry, trim work, and light assembly projects.

This #10 x 3 inch square drive wood screw features an oversized flat head that delivers four times the holding power of standard screws. The type 17 self-drilling point ensures easy penetration into wood studs and framing members. Self-countersinking head design allows flush installation when used with an impact driver. Coarse thread pattern provides strong grip in soft and engineered wood materials. For deck, framing, and general woodworking projects.

This #10 x 2 1/2" flat-head wood screw features an oversized head that delivers four times the holding power of conventional screws. The type 17 self-drilling point penetrates wood easily without pre-drilling, while the self-countersinking head recesses flush with the surface when driven with an impact driver. Square drive and coarse thread ensure secure fastening in framing, decking, and general wood construction.

These #14 x 1-1/4" wood screws provide strong, dependable fastening for general assembly and installation work. The domed round head with a square (Robertson) drive ensures controlled, slip-resistant engagement, while the coarse wood threads bite firmly into the material. A partially threaded shank with a smooth upper section improves clamping between joined components, and the tapered, sharpened tip promotes easy, accurate starts. Well suited for repairs, structural attachments, and everyday carpentry tasks in both shop and jobsite environments.

Designed for accurate wood fastening, these #10 x 7/8" screws feature a countersunk head for clean, flush seating and a square (Robertson) drive that ensures controlled, slip-free engagement. The coarse, full-length wood threads provide strong grip, while the tapered point promotes quick starts and straight driving. The clear zinc finish adds basic corrosion resistance for indoor applications. Well suited for wood projects, repairs, and general assembly, they offer reliable performance across repeated installations.

Designed with strength and reliability in mind. Make fastening hinges a quick and easy step with these self-drilling wood screws.

Designed with strength and reliability in mind. Make fastening hinges a quick and easy step with these self-drilling wood screws.

Designed with strength and reliability in mind. Make fastening hinges a quick and easy step with these self-drilling wood screws.

These stake rings are intended to be installed on doors or fences for the removal of barriers. Serving as hinges, they are easy to install and can be mounted independently on the left or right.

Trusscore screw #10 of 1 1/2" with a pancake head stainless steel.

Built for wood fastening, these #10 x 3" screws combine strong grip with straightforward driving. The oversized, washer-style flat head delivers up to four times the holding power versus conventional heads, and a #2 square drive ensures positive bit engagement. Coarse threads pair with a self-drilling Type 17 point for smooth starts in wood. Head nibs create a self-tapping action so the head recesses cleanly, including when driven with an impact driver. A zinc-plated, silver finish offers a clean look. Supplied as a convenient 4-pack for small projects and repairs.

Zinc-plated wood screw measuring #10 x 2 1/2 inches with an oversized flat head delivering four times the holding power of standard screws. Features a square drive recess, coarse thread, and type 17 self-drilling point for efficient penetration into wood studs. The self-countersinking head recesses flush with the surface when installed with an impact driver. Ideal for framing, decking, and structural fastening applications.

This #8 x 3" zinc-plated wood screw features a pan washer head and square drive for secure pocket-hole joinery. The coarse thread and regular wood point ensure strong grip in softwood and hardwood assemblies. Designed for angled drilling applications at 15 degrees, this screw eliminates the need for clamping during assembly. Zinc coating provides corrosion resistance for interior projects.

This #8 x 2" zinc-plated wood screw features a pan washer head and square drive for secure pocket hole joinery. The coarse thread and regular wood point ensure strong grip in softwood and hardwood applications. Designed for angled drilling at 15 degrees, these screws create concealed joints without clamping. Zinc plating provides corrosion resistance for interior projects.

Zinc-plated wood screw measuring #8 gauge by 2 1/2" length. Features a pan washer head for flush seating and square drive for slip-resistant fastening. Coarse thread design ensures strong grip in softwood and hardwood applications. Regular wood point allows direct driving without pre-drilling in most materials. Suitable for cabinetry, framing, and general woodworking assemblies.

This zinc-plated wood screw measures 1 inch in length with a #8 gauge diameter. Designed for pocket-hole joinery, it features a pan washer head, square drive, and coarse thread for strong wood-to-wood connections. The zinc coating provides corrosion resistance for interior applications. Suitable for furniture assembly, cabinetry, and general woodworking projects requiring angled fastening.

This #8 x 1 3/4" zinc-plated wood screw features a pan washer head with square drive for secure fastening in pocket hole joinery. The coarse thread design grips wood fibres firmly while the regular wood point ensures easy starting without pre-drilling in softwoods. Ideal for angled pocket hole applications at 15 degrees, this screw joins workpieces without clamping.

This 1 1/8-inch #8 zinc-plated wood screw features a pan washer head and square drive for secure pocket-hole joinery. The coarse thread and regular wood point provide strong grip in softwood and plywood. Designed for angled pocket-hole assemblies, this fastener creates sturdy joints without clamping. For small to medium woodworking projects requiring concealed fastening.

This #8 x 1 1/4" zinc-plated wood screw features a pan washer head, square drive, and coarse thread designed for pocket-hole joinery. The regular wood point ensures clean entry without splitting. Suitable for angled drilling at 15 degrees to join two workpieces securely. Zinc plating provides corrosion resistance for interior applications.

This #8 x 1 1/2" zinc-plated wood screw features a pan washer head and square drive for secure pocket-hole joinery. The coarse thread and regular wood point provide strong holding power in softwood and plywood. Designed for angled drilling applications at 15 degrees, these screws create tight joints without clamping. For small assembly projects and furniture repairs.

This 1 3/8-inch screw eye features zinc plating for corrosion resistance. Designed for light-duty hanging applications, these versatile fasteners create secure attachment points in wood surfaces. The threaded shank provides reliable grip while the closed loop accepts hooks, wire, or rope. For multiple projects around the home or workshop.

These #6 x 1 1/2" zinc-plated wood screws featuring hi-low self-tapping threads and a sharp point, they drive quickly into softwood, engineered wood, and particleboard. The flat head with countersinking nibs sits flush with the surface, while the square drive provides secure bit engagement. Ideal for cabinetry, trim work, and general wood assembly projects.

These #6 x 1 1/4" zinc-plated steel wood screws are designed for softwood, engineered wood, and particleboard, they feature a hi-low self-tapping thread for secure fastening and faster installation. The flat head with countersinking nibs delivers a flush finish, while the square drive recess ensures positive bit engagement. Sharp regular point penetrates material without pre-drilling in most applications.

These #14 x 1" zinc-plated wood screws feature a flat head with square drive for secure fastening. The single-helix thread delivers strong holding power in wood, while the regular point ensures easy starting. Flat head design allows flush or countersunk installation. Zinc coating provides corrosion resistance for interior applications. For carpentry, cabinetry, and general woodworking projects.

Zinc-plated wood screws measuring #8 x 1 3/4" with pan washer head and square drive. Coarse thread design with regular wood point ensures secure fastening in softwood and hardwood applications. Ideal for angled pocket hole joinery where clamping is not required. Zinc plating provides corrosion resistance for interior projects. For cabinet, furniture, and general woodworking assemblies.

Designed for wood and particle board joinery, these #8 x 1" zinc-plated screws drive cleanly using an angled pilot hole of about 15° to join two pieces. The pan washer head provides a wide bearing surface, and the square drive offers positive engagement. Coarse threads run to the head for strong hold, while the sharp wood point starts quickly in standard wood applications. Clamping is not required, and glue can be added if desired.

Keep your cabinet hardware secure with these versatile 5 x 5/8" wood screws. The white finished oval head blends seamlessly with light-coloured slides and hinges, while the square drive provides excellent grip for efficient installation. Perfect for kitchen renovations, furniture assembly, and any project where a clean, coordinated look matters.

Keep your trim and woodworking projects looking sharp with these #5 x 1/2" white wood screws. The painted white heads blend seamlessly with white-painted surfaces, mouldings, and cabinetry. Square drive design means less slipping and frustration during installation. Steel construction ensures durability while the single-helix thread grips wood securely.

These #8 x 3" square-drive screws deliver clean, reliable fastening in particleboard, softwood, and engineered wood. Made of zinc-plated steel with a bright silver finish, they provide durable performance. Self-tapping, hi-low asymmetric threads speed installation, and the sharp point starts quickly. Flat countersunk heads with nibs seat flush for a neat result, while partial threading with an unthreaded shank helps draw materials tight. Use with square drivers.

These #8 x 2.5" square-drive particle board screws provide strong holding power and a clean, flush finish in softwood, engineered wood, and particleboard. Made of zinc-plated steel with a reflective silver finish, they combine durability with smooth driving. A self-tapping hi-low thread speeds installation, while the sharp regular point starts easily without predrilling in most wood. The flat head with countersinking nibs seats flush, and the square drive ensures secure torque transfer. They suit both DIY users and professionals for repairs and new builds.

These #8 x 2" particle board screws provide reliable fastening in softwood, engineered wood, and particleboard. A self-tapping hi-low thread speeds installation, while the sharp point allows quick, precise starts. The square (Robertson) drive offers secure bit engagement, and the flat countersunk head with nibs seats flush for a neat finish. Fully threaded along the shank for consistent holding power, they feature a zinc-plated steel, glossy silver finish. They are convenient to stock for repeat tasks and ongoing projects.

These #14 x 2" wood screws combine a square drive with a pan head to deliver secure bit engagement and controlled torque in wood. Made of zinc-plated steel, they feature a regular conical point and a single-helix thread for reliable holding power. A partially unthreaded shank beneath the head helps pull materials tight during assembly. The smooth, uniform surface and chamfered square recess support repeatable installation for DIY users and professionals. Supplied in a pack of 100, they suit repairs, assembly, and general carpentry.

These #9 x 1 3/4" wood screws cover a wide range of assemblies and repairs. The flat, countersunk head seats flush for a neat finish, and the square drive provides positive bit engagement. Made of zinc-plated steel with a silver finish. A sharp point starts quickly in wood, and a single-helix, partially threaded shank with a smooth section near the head draws pieces tightly together for strong holding power. Supplied in a pack of 100, they suit general carpentry and offer consistent results and convenient stock for jobsite projects and home workshop work.

These #8 x 3" zinc-plated wood screws provide dependable fastening for wood projects and pocket-hole assemblies. The pan washer head with a wide flange helps distribute load, while the #2 square drive ensures steady bit engagement. A regular thread delivers consistent holding power in wood. The Type 17 point starts easily and reduces the need for pre-drilling; a 1/8" pilot size is noted on the packaging. Well suited where clamping is not required for this type of joinery, with adhesive use remaining optional. Zinc-plated silver finish.

Edge screws made of 316 stainless steel provide enhanced corrosion protection, making them perfect for humid environments and coastal applications. Designed for use with MARKSMAN tools, they enable concealed fastening for a neat, uninterrupted finish. The patented bevelled tip extracts material to prevent cracks, while the reverse upper thread improves grip within the board.

These PWR Drive FIT trim screws with dual-action heads provide a precise and secure hold for finish carpentry and interior projects. Their clean countersinking design ensures a flawless result on moldings, casings, and decorative woodwork. The included T15 bit allows quick, stable driving while minimizing thread wear. Made of hardened steel with a subtle bronze finish, these screws combine strength, reliability, and a refined appearance — perfect for clean, professional assemblies.

These PWR Drive FIT trim screws with dual-action heads provide clean and precise fastening for finishing and carpentry applications. Their design ensures smooth countersinking for a professional, uniform appearance. The included T15 bit allows quick, secure installation while maintaining consistent torque. Made from hardened steel with a subtle bronze finish, they combine strength, precision, and visual appeal. Ideal for moldings, frames, and wood trim where clean results and solid fastening are required.

These PWR Drive FIT trim screws with dual-action heads ensure precise and stable fastening for finishing, framing, and decorative woodwork. Their clean countersinking design provides a smooth, uniform surface without splitting. The included T15 bit simplifies installation and offers secure grip during driving. Made of hardened steel with a subtle bronze finish, they combine strength, precision, and a refined look. Perfect for projects requiring reliable fastening and clean results on delicate materials.

These PWR Drive FIT trim screws with dual-action heads provide precise and clean fastening for finishing and carpentry projects. Their advanced design ensures smooth countersinking for a neat, professional appearance. The included T15 bit makes installation quick and stable, preventing stripping and ensuring consistent torque. Made of hardened steel with a subtle bronze finish, they combine technical performance with aesthetic appeal. Ideal for trim, moldings, and wood casings requiring strong, clean fastening.

These PWR Drive FIT trim screws with dual-action heads provide a precise and secure hold for finish carpentry and interior projects. Their clean countersinking design ensures a flawless result on moldings, casings, and decorative woodwork. The included T15 bit allows quick, stable driving while minimizing thread wear. Made of hardened steel with a subtle bronze finish, these screws combine strength, reliability, and a refined appearance — perfect for clean, professional assemblies.

The durable GRK Low-Profile Cabinet Screws are designed for efficient cabinet construction and woodworking tasks. Their small, self-tapping heads ensure a flush finish without pre-drilling, perfect for clean, professional results. The Climatek™ coating provides enhanced corrosion resistance for indoor and outdoor use. Designed for versatility, this large 4000-pack of screws offers reliable performance for cabinetry and a wide range of other applications.

Specifically designed for cabinet construction and installation, these screws provide superior, long-lasting fastening. Their Torx drive prevents stripping and ensures stable insertion, while the washer-style head offers a flush and clean grip. Equipped with W-Cut technology for easy driving and a Zip-Tip self-tapping point for pre-drill-free installation, they are made from case-hardened steel for enhanced strength. The Climatek coating, compliant with AC257 standards, provides corrosion protection, making them ideal for indoor and outdoor use, even on treated wood.

The CabinetMC screws are specially designed for cabinet installation and construction. Manufactured in #8 gauge (4 mm) for a universal size, they are perfect not only for cabinets but also for a wide range of indoor and outdoor projects. Their low-profile head and innovative design allow for easy installation and a neat finish, even on the most demanding jobs. Ideal for securing elements in tight spaces, these screws are a versatile choice for professionals and DIY enthusiasts alike.