Screws and anchors

This #8 x 1 1/2" zinc-plated wood screw features a pan washer head and square drive for secure pocket-hole joinery. The coarse thread and regular wood point provide strong holding power in softwood and plywood. Designed for angled drilling applications at 15 degrees, these screws create tight joints without clamping. For small assembly projects and furniture repairs.

This 1 3/8-inch screw eye features zinc plating for corrosion resistance. Designed for light-duty hanging applications, these versatile fasteners create secure attachment points in wood surfaces. The threaded shank provides reliable grip while the closed loop accepts hooks, wire, or rope. For multiple projects around the home or workshop.

These #6 x 1 1/2" zinc-plated wood screws featuring hi-low self-tapping threads and a sharp point, they drive quickly into softwood, engineered wood, and particleboard. The flat head with countersinking nibs sits flush with the surface, while the square drive provides secure bit engagement. Ideal for cabinetry, trim work, and general wood assembly projects.

These #6 x 1 1/4" zinc-plated steel wood screws are designed for softwood, engineered wood, and particleboard, they feature a hi-low self-tapping thread for secure fastening and faster installation. The flat head with countersinking nibs delivers a flush finish, while the square drive recess ensures positive bit engagement. Sharp regular point penetrates material without pre-drilling in most applications.

These #14 x 1" zinc-plated wood screws feature a flat head with square drive for secure fastening. The single-helix thread delivers strong holding power in wood, while the regular point ensures easy starting. Flat head design allows flush or countersunk installation. Zinc coating provides corrosion resistance for interior applications. For carpentry, cabinetry, and general woodworking projects.

Zinc-plated wood screws measuring #8 x 1 3/4" with pan washer head and square drive. Coarse thread design with regular wood point ensures secure fastening in softwood and hardwood applications. Ideal for angled pocket hole joinery where clamping is not required. Zinc plating provides corrosion resistance for interior projects. For cabinet, furniture, and general woodworking assemblies.

Designed for wood and particle board joinery, these #8 x 1" zinc-plated screws drive cleanly using an angled pilot hole of about 15° to join two pieces. The pan washer head provides a wide bearing surface, and the square drive offers positive engagement. Coarse threads run to the head for strong hold, while the sharp wood point starts quickly in standard wood applications. Clamping is not required, and glue can be added if desired.

Keep your cabinet hardware secure with these versatile 5 x 5/8" wood screws. The white finished oval head blends seamlessly with light-coloured slides and hinges, while the square drive provides excellent grip for efficient installation. Perfect for kitchen renovations, furniture assembly, and any project where a clean, coordinated look matters.

Keep your trim and woodworking projects looking sharp with these #5 x 1/2" white wood screws. The painted white heads blend seamlessly with white-painted surfaces, mouldings, and cabinetry. Square drive design means less slipping and frustration during installation. Steel construction ensures durability while the single-helix thread grips wood securely.

These #8 x 3" square-drive screws deliver clean, reliable fastening in particleboard, softwood, and engineered wood. Made of zinc-plated steel with a bright silver finish, they provide durable performance. Self-tapping, hi-low asymmetric threads speed installation, and the sharp point starts quickly. Flat countersunk heads with nibs seat flush for a neat result, while partial threading with an unthreaded shank helps draw materials tight. Use with square drivers.

These #8 x 2.5" square-drive particle board screws provide strong holding power and a clean, flush finish in softwood, engineered wood, and particleboard. Made of zinc-plated steel with a reflective silver finish, they combine durability with smooth driving. A self-tapping hi-low thread speeds installation, while the sharp regular point starts easily without predrilling in most wood. The flat head with countersinking nibs seats flush, and the square drive ensures secure torque transfer. They suit both DIY users and professionals for repairs and new builds.

These #8 x 2" particle board screws provide reliable fastening in softwood, engineered wood, and particleboard. A self-tapping hi-low thread speeds installation, while the sharp point allows quick, precise starts. The square (Robertson) drive offers secure bit engagement, and the flat countersunk head with nibs seats flush for a neat finish. Fully threaded along the shank for consistent holding power, they feature a zinc-plated steel, glossy silver finish. They are convenient to stock for repeat tasks and ongoing projects.

These #14 x 2" wood screws combine a square drive with a pan head to deliver secure bit engagement and controlled torque in wood. Made of zinc-plated steel, they feature a regular conical point and a single-helix thread for reliable holding power. A partially unthreaded shank beneath the head helps pull materials tight during assembly. The smooth, uniform surface and chamfered square recess support repeatable installation for DIY users and professionals. Supplied in a pack of 100, they suit repairs, assembly, and general carpentry.

These #9 x 1 3/4" wood screws cover a wide range of assemblies and repairs. The flat, countersunk head seats flush for a neat finish, and the square drive provides positive bit engagement. Made of zinc-plated steel with a silver finish. A sharp point starts quickly in wood, and a single-helix, partially threaded shank with a smooth section near the head draws pieces tightly together for strong holding power. Supplied in a pack of 100, they suit general carpentry and offer consistent results and convenient stock for jobsite projects and home workshop work.

These #8 x 3" zinc-plated wood screws provide dependable fastening for wood projects and pocket-hole assemblies. The pan washer head with a wide flange helps distribute load, while the #2 square drive ensures steady bit engagement. A regular thread delivers consistent holding power in wood. The Type 17 point starts easily and reduces the need for pre-drilling; a 1/8" pilot size is noted on the packaging. Well suited where clamping is not required for this type of joinery, with adhesive use remaining optional. Zinc-plated silver finish.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

Screw this eyelet into your beam to catch your light.

These stake rings are intended to be installed on doors or fences for the removal of barriers. Serving as hinges, they are easy to install and can be mounted independently on the left or right.

Edge screws made of 316 stainless steel provide enhanced corrosion protection, making them perfect for humid environments and coastal applications. Designed for use with MARKSMAN tools, they enable concealed fastening for a neat, uninterrupted finish. The patented bevelled tip extracts material to prevent cracks, while the reverse upper thread improves grip within the board.

Trusscore screw #10 of 1 1/2" with a pancake head stainless steel.

These PWR Drive FIT trim screws with dual-action heads provide a precise and secure hold for finish carpentry and interior projects. Their clean countersinking design ensures a flawless result on moldings, casings, and decorative woodwork. The included T15 bit allows quick, stable driving while minimizing thread wear. Made of hardened steel with a subtle bronze finish, these screws combine strength, reliability, and a refined appearance — perfect for clean, professional assemblies.

These #7 x 2 1/2" dual-action trim head screws are designed for trim and moulding installation, delivering stronger mitre joints with reduced surface splitting. The trim head sits flush and discreet once driven, making them ideal for finish carpentry applications. Their T15 Torx drive provides excellent bit engagement and reduces cam-out during installation. A tan coating blends with common wood tones. The pack includes 300 screws and one T15 driver bit, covering most small-to-medium trim projects for both professionals and DIY users.

These #7 x 1 5/8" dual-action trim head screws are designed for trim and moulding installation, delivering stronger mitre joints with reduced surface splitting. The trim head sits flush and discreet once driven, making them ideal for finish carpentry applications. Their T15 Torx drive provides excellent bit engagement and reduces cam-out during installation. A tan coating blends with common wood tones. The pack includes 500 screws and one T15 driver bit, covering most small-to-medium trim projects for both professionals and DIY users.

These #7 x 2 1/2" dual-action trim head screws are designed for trim and moulding installation, delivering stronger mitre joints with reduced surface splitting. The trim head sits flush and discreet once driven, making them ideal for finish carpentry applications. Their T15 Torx drive provides excellent bit engagement and reduces cam-out during installation. A tan coating blends with common wood tones. The pack includes 100 screws and one T15 driver bit, covering most small-to-medium trim projects for both professionals and DIY users.

These #7 x 1 5/8" dual-action trim head screws are designed for trim and moulding installation, delivering stronger mitre joints with reduced surface splitting. The trim head sits flush and discreet once driven, making them ideal for finish carpentry applications. Their T15 Torx drive provides excellent bit engagement and reduces cam-out during installation. A tan coating blends with common wood tones. The pack includes 100 screws and one T15 driver bit, covering most small-to-medium trim projects for both professionals and DIY users.

These #14 x 1-1/4" wood screws provide strong, dependable fastening for general assembly and installation work. The domed round head with a square (Robertson) drive ensures controlled, slip-resistant engagement, while the coarse wood threads bite firmly into the material. A partially threaded shank with a smooth upper section improves clamping between joined components, and the tapered, sharpened tip promotes easy, accurate starts. Well suited for repairs, structural attachments, and everyday carpentry tasks in both shop and jobsite environments.

Designed for accurate wood fastening, these #10 x 7/8" screws feature a countersunk head for clean, flush seating and a square (Robertson) drive that ensures controlled, slip-free engagement. The coarse, full-length wood threads provide strong grip, while the tapered point promotes quick starts and straight driving. The clear zinc finish adds basic corrosion resistance for indoor applications. Well suited for wood projects, repairs, and general assembly, they offer reliable performance across repeated installations.

Engineered specifically for pocket-hole joinery applications requiring precise angled connections between workpieces. Features advanced type 17 self-drilling point that completely eliminates pre-drilling requirements while preventing wood splitting and cracking during installation. Square drive design provides superior torque transfer and significantly reduced cam-out compared to standard Phillips heads. Designed for joining workpieces at precise 15-degree angles without requiring clamps or additional fixtures. Glue application recommended for enhanced joint strength. Ideal for cabinetry construction, furniture assembly, and woodworking projects requiring concealed fastening solutions.

Professional-grade wood screws engineered for reliable fastening in woodworking and construction projects. The zinc-plated steel construction provides corrosion resistance for both indoor and outdoor applications. Square drive design prevents cam-out and allows precise control during installation. Single-helix thread pattern ensures strong holding power in various wood types. Flat head profile allows flush mounting or countersinking below surface level. Ideal for cabinetry, furniture assembly, deck construction, and general carpentry work requiring secure wood-to-wood connections.

High-performance zinc-plated steel screws specifically engineered for reliable fastening in softwood, engineered lumber, and particleboard construction applications. The precision self-tapping hi-low thread design ensures rapid installation with superior holding power, while the sharp regular point penetrates materials cleanly without splitting. Square drive head provides positive bit engagement and reduced cam-out during installation. Flat head with countersinking nibs creates perfectly flush finishes for professional results in carpentry and construction projects.

These screws feature a regular point and have a single-helix thread that provides great holding power in wood.

These screws feature a regular point and have a single-helix thread that provides great holding power in wood.

These screws feature a regular point and have a single-helix thread that provides great holding power in wood.

These screws feature a regular point and have a single-helix thread that provides great holding power in wood.

These screws feature a regular point and have a single-helix thread that provides great holding power in wood.

These screws feature a regular point and have a single-helix thread that provides great holding power in wood.

These screws feature a regular point and have a single-helix thread that provides great holding power in wood.

These screws feature a regular point and have a single-helix thread that provides great holding power in wood.