Winter shelters

This car shelter door elastic kit provides a secure and flexible fastening solution for abri panels and door flaps. Each kit includes six S-hooks and six 7" elastics designed to keep shelter door edges tensioned and properly aligned. Suitable for seasonal and permanent car shelters, this kit offers a straightforward way to maintain door closure against wind and weather.

This Alton dry-cast concrete counterweight block is engineered to anchor the base of car shelters, tents, and other outdoor enclosures. Its dry-cast concrete composition reduces water absorption and resists salt erosion, extending the service life of the installation. The block also elevates the shelter base off the ground, preventing premature deterioration caused by moisture and ground contact.

Protect your truck, SUV, or RV with this spacious double-high car shelter built on a round galvanized steel tube frame. The 7 ft 10 in door clearance lets taller vehicles in and out without a second thought, and the rounded structure naturally sheds snow so you spend less time clearing it off. Two doors and two windows keep access and airflow exactly where you need them. The welded UV-resistant canvas at 187 g/m² holds up season after season, reaching a total shelter height of 10 ft 2 in.

Give your 2010-model car shelter a second life with this nylon replacement cover. Made from 5.65 oz/sq. yd. nylon fabric with built-in UV protection, it shields your vehicle from sun and weather without replacing the entire structure. The kit comes complete with a door panel featuring a 7'3" opening and all the fasteners you need, so you can get back to protecting your vehicle quickly.

This nylon replacement cover is designed for 2010-model 11' x 24' car shelters and includes a door with a 7'3" opening height. The fabric weighs 5.65 oz/sq. yd. and is treated against UV rays to resist sun degradation over time. All fasteners are included for straightforward installation. Suitable for protecting vehicles, ATVs, or seasonal equipment stored under a car shelter frame.

Get this high quality car shelter canvas that will perfectly replace the damaged one.

Give your 2010 model car shelter a second life with this nylon replacement cover sized at 11' x 32'. The canvas is treated against UV rays so it holds up through years of sun exposure without fading or breaking down. With a 7'3" door opening, you can drive in and out without hassle, and the included door and fasteners mean everything you need is in the box — no extra hardware required.

Give your 2010-model car shelter a second life with this nylon replacement cover, engineered to fit the 11' x 20' frame without any structural work. The 5.65 oz per square yard UV-treated fabric holds up against sun exposure season after season, keeping your vehicle sheltered and protected. The included door with a 7'3" opening height and all fasteners mean you can complete the replacement quickly and get back to using your shelter.

Give your 2010-model car shelter a second life with this UV-treated nylon replacement cover, sized 11' x 16'. The 5.65 oz/sq. yd. canvas holds up against sun, wind, and rain, keeping your vehicle or equipment protected season after season. The door opening stands 7'3" tall, and the kit comes with the door panel and all fasteners — everything you need to get back under cover.

These plastic end caps are designed to insert under the legs of a car shelter, protecting the asphalt or interlocking pavers from scratching and preventing the shelter frame from sinking into the ground over time. Pack of 12, they fit 1 1/4" diameter shelter tubes and provide a stable, protective base for seasonal or permanent car shelter installations.

This utility winter shelter features a hot-dip galvanized steel pipe frame and a UV-resistant polyethylene tarp for year-round outdoor protection. With 6'6" of interior clearance, it comfortably accommodates vehicles, equipment, or seasonal storage. The structure is designed for straightforward assembly, making it a practical solution for residential or light commercial use.

This aluminium moulding wirelock attachment secures a connection panel (flap) firmly to a garage wall or house exterior for car shelter installations. Compatible with the BMR flap (code 079-6213), sold separately. Two wirelocks are required to fix a flap on an 11-foot shelter, providing a stable, weatherproof junction between the shelter panel and the building structure.

This set of 12 rings is designed to hang and support the door panel of a car shelter. Each ring attaches to the door support rail, allowing the door to slide smoothly along the track. These rings provide a complete replacement or installation solution for standard car shelter door systems.

This polyethylene connection tarp panel installs between a car shelter and an adjacent building to block rain and snow infiltration through the gap. Designed for shelters with an 11-foot width, it creates a weathertight seal at the junction point. The Wirelock attachment system (BMR code 079-6240) is required for installation and is sold separately.

Protect your 10' x 10' gazebo all winter long with this woven polyethylene cover designed to shield against snow, wind, and freezing temperatures. The UV-stabilized white canvas holds up through harsh conditions, while the semi-arch zipper door lets you access stored items without taking the whole cover down. A straightforward way to extend the life of your gazebo investment from one season to the next.

Keep your gazebo sheltered all winter long with this woven polyethylene cover designed for 10' x 12' frames. The UV-stabilized white canvas wraps your structure against snow, wind, and cold, while the zippered semi-arch door on the 13' panel lets you step in and out without hassle. A straightforward seasonal solution for protecting your gazebo.

This wall-mount car shelter features a heavy-duty waterproof canvas fabric weighing 5.65 oz, treated against UV rays for lasting outdoor durability. Galvanized steel tubes form the structural frame, while a quick-attach system simplifies assembly. With two doors and two windows, the shelter offers a door clearance of 7 feet and a total height of 10 feet, accommodating most passenger vehicles in a residential driveway or garage-adjacent setting.

When your shelter frame is still solid but the cover has seen better days, this replacement canvas cover for 5' x 8' x 6.5' utility shelters lets you get back out to the hunt or keep your gear protected without buying a whole new unit. Sized to fit standard matching frames, it's a straightforward solution for seasonal storage, hunting camps, and outdoor equipment shelter — do not include the frame.

This polyethylene shelter cover is designed to protect vehicles and equipment from the elements. Its UV-resistant PE fabric helps shield against sun damage, while the sewn seams prevent water infiltration. The quick-attach fastening system makes installation and removal straightforward. The cover includes two front doors, two windows for ventilation and visibility, and one side door for convenient access. An accessories bag is included for organized storage of hardware. Suitable for residential and light commercial use.

This permanent anchoring kit is engineered to secure structures against strong winds. Each of the four 20-inch steel anchors features a pointed tip for easy ground penetration and a flange plate for secure holding. The kit includes all hardware needed for installation: 4 anchors, 4 eyebolts, 4 screws, one push rod, and one drive head. Suited for securing winter shelters, canopies, or similar seasonal structures, this set delivers reliable hold in varied ground conditions for both residential and professional applications.

Give your BMR car shelter a second life with this 11' replacement door, compatible with shelter models 020-2848, 020-2857, and 068-2363. Instead of replacing the whole structure, simply swap out the door panel and get back to protecting your vehicle from the elements. Everything you need for installation — hooks, rails, and straps — is already included in the box.

Protect your vehicle through every season with this 11' x 24' arched car shelter. Its rounded profile sheds snow efficiently so you spend less time clearing the roof, while the UV-treated 5.65 oz/sq.yd. canvas guards against sun degradation. Two doors and two windows add convenience and ventilation, and the clip strap assembly system means you can get it up quickly without specialized tools. The 18-gauge galvanized steel pipe frame delivers the structural rigidity needed to stand up to Canadian winters.

Protect your vehicle through every season with this roomy 11' x 20' car shelter, designed with a rounded arch structure so snow slides off on its own instead of building up overhead. The 18-gauge galvanized steel pipe frame holds up to the elements, while the UV-treated canvas at 5.65 oz/sq.yd. resists sun damage year after year. A quick-clip strap system makes setup straightforward, and two doors plus two windows keep air circulating freely inside the generous 7'3" interior clearance.

Protect up to two small vehicles side by side with this 11' x 32' car shelter, where the rounded arch keeps snow sliding off on its own so you spend less time clearing it. Two wide doors with 6'6" clearance and two windows make daily access straightforward, while the UV-treated canvas and 18-gauge galvanized steel frame hold up season after season. The clip-strap assembly system gets the shelter up quickly without specialized tools.

This nylon replacement cover is designed for the 2010 model car shelter frame (frame not included) and fits an 18' x 20' structure. The fabric weighs 5.65 oz/sq. yd. and is UV-treated to resist sun degradation over time. The cover includes a door with a 6'11" opening height, along with all necessary fasteners for installation.

This double car shelter features a rounded arch structure that allows snow to slide off naturally, reducing load buildup. The clear polyethylene roof is UV-treated and welded with a clip-strap system for straightforward assembly. Galvanized steel tubes with 18-gauge thickness provide structural rigidity. Two doors and two windows are included, with 6'11" door clearance and an overall height of 9'3".

This single-car shelter features a rounded galvanized steel tube frame that allows snow to slide off easily, reducing accumulation load over the season. Two windows and two doors provide ventilation and convenient access, while the canvas is UV-protected and welded with clip-strap fasteners for straightforward assembly. Ideal for seasonal vehicle storage in driveways and residential properties.

This polyethylene patio door shelter provides weather protection at exterior door entries. Built on galvanized steel tube framing at 18 gauge, it features a 5.65 oz/sq. yd. canvas and a clip-strap system that simplifies tarp installation without tools. The structure offers 6'4" of interior clearance with posts spaced 4' apart, making it a practical overhead cover for patio door thresholds.

This entrance shelter features a removable door and a polyethylene canvas cover mounted on an 18-gauge galvanized steel tube frame. The new easy-clip strap system simplifies installation and tarp assembly. With 6 ft of interior clearance and 4 ft between posts, it provides a protected entryway for residential doorways, garages, or outbuildings.

This polyethylene utility shelter measures 5' wide by 8' long with a 6'5" interior clearance height, making it suitable for tractors, ATVs, snow throwers, and firewood storage. The galvanized steel tube frame (18 ga.) provides a sturdy structure, while the clip-strap tarp attachment system simplifies assembly. Dual entry doors — one at each end — allow access from both sides.

This 4' side door for classic car shelters adds a convenient lateral entrance to your existing structure. The UV-resistant cover closes securely with elastic rope and S-hooks to keep the opening weathertight. Measuring 1.24 m wide by 2.15 m tall, it installs quickly without tools and is compatible with standard classic-style car shelter frames.

Designed to secure car shelters quickly and reliably, these 24" nylon straps with plastic buckles make installation and removal straightforward. Each strap features a quick-release buckle for fast adjustments without tools. The woven nylon construction resists stretching and holds firmly against wind. Pack of 10, they provide enough straps to anchor a standard car shelter completely. A practical choice for homeowners and contractors who set up or take down seasonal shelters regularly.

This floor bracket kit is designed to secure car shelters firmly to the ground. It includes two 12-inch steel nails and a formed metal floor bracket, providing a reliable anchoring solution for seasonal car shelters. The nails drive into the ground through the bracket to keep the shelter structure stable against wind and movement. This kit delivers a straightforward, effective fastening system for residential car shelter applications.

These 20" ground stakes are designed to anchor car shelters securely to the ground, preventing movement caused by wind and weather. Pack of 2, they are suited for use with temporary or seasonal automotive shelters. Their length provides firm soil penetration for reliable holding power throughout the season.

This wind strap kit secures a double car shelter against wind uplift and movement. The set includes one clear polypropylene strap measuring 33.6 ft long by 6 in wide, along with two 20 in steel stakes painted black for ground anchoring. Designed to keep shelter covers taut and in place during adverse weather conditions, this kit is a straightforward anchoring solution for seasonal or permanent double-bay shelters.

This wind strap kit is designed to secure a single car shelter against wind uplift and movement. The set includes one clear strap that runs over the shelter frame and two black-painted 20" steel stakes that anchor into the ground. Straightforward to install, this kit helps keep a single-bay portable shelter in place during adverse weather conditions.