Ladders, stepladders and scaffolds

The LWB model is a basic insulated attic ladder made of pine wood. It allows access to otherwise unable attic spaces with the hassle and clutter of an extension ladder. Each LWB model is equipped with non-slip steps, a handrail, an insulted door and a weather seal gasket to reduce heat loss.

The MetalTech Safeclimb 6 ft. BAKER scaffolding. Has an adjustable deck that can be as low as 27-inch to as high as 76-inch to 2-inch Constructed with rugged 1-1/2-inch square steel tubes with a baked-on yellow poly powder coat finish. The unit has a load capacity of 1000lbs when weight is distributed.You can stack up to 3 units for increased height by using stabilizers and guardrail systems (sold separately) also equipped with four 5" double locking casters.

This scaffold section includes two 5' x 5' frames (BMR code 080-2037), two 7' x 4' cross braces (M-MC4884), four 1 3/8" wide coupling pins with a 1" collar, and four spring locks.

Ensure high security with this scaffold platform. Its sturdy metal frame features hooks at each end, making it ideal for hanging and ensuring a secure installation. The plywood platform allows for easy movement while providing a safe surface. Compatible with BMR scaffold code: 704-0113.

Solidify your scaffold with this galvanized scaffold brace.

Solidify your scaffold with this galvanized scaffold brace.

This painted steel scaffold includes two frames measuring 60" in height by 60" in width, two 10' by 4' high cross braces (M-MC48120 BMR Code 704-0159), four 1 3/8" wide coupling pins with a 1" collar, and four spring locks. It can support a load of 4950 lbs with a safety factor of 2.5 x 1. Compatible with the scaffold platform (BMR Code 704-0210).

This steel scaffold includes two 10' long by 4' high cross braces (M-MC48120 BMR Code 704-0159), two frames measuring 60" in height by 30" in width, four 1 3/8" wide coupling pins with a 1" collar, and four spring locks.

This painted steel scaffold includes two cross braces (M-MC241200), two frames measuring 36" in height by 60" in length, four 1 3/8" wide coupling pins with a 1" collar, and four spring locks. It is compatible with other scaffolds (BMR Code: 704-0113 and 703-0104) as well as with the scaffold platform (BMR Code: 704-0210).

Install superimposed scaffolds using this coupling pin.

Use this banana-shaped coupling pin piece to overlay a scaffold structure.

Use this adjustable jack with plate in the center when mounting your scaffold.

Get a better mobility for your scaffold while remaining safe with these wheels with brake.

Install this railing for extra security when using the scaffold.

Stabilize your scaffold as well as keep mobility with this four outrigger set.

Use this gypsum board lift quickly, quietly and easily.

Be safe while doing your work at height with this mini scaffold.

Get extra support during your repair work by using this support rod that acts as a third hand.

This industrial steel shelf unit features three shelves, designed to support a total load of 4,500 lb. Each shelf has a capacity of 1,500 lb evenly distributed and is reinforced by five support bars to prevent any deformation under pressure. Made of powder-coated steel, this shelf unit is built to offer exceptional strength and durability. The shelves are adjustable in 2.35-inch increments, and pin locks ensure a secure installation. Two stacking trays included allow for connecting two units vertically or horizontally.