Hand tools

Ideal for small construction jobs, this GARANT nail bar includes a presser foot and a nail puller at the end of the collar.

Ideal for small construction jobs, this GARANT nail bar includes a presser foot and a nail puller at the end of the collar.

Ideal for small construction jobs, this GARANT nail bar includes a presser foot and a nail puller at the end of the collar.

Ideal for small construction jobs, this GARANT nail bar includes a presser foot and a nail puller at the end of the collar.

The Milwaukee pry bar set features an I Beam design for up to 40% more prying strength. The all metal core and hammer ready strike cap increase leverage and durability. Each pry bar has a comfort tri lobe handle, as well as a chrome finish for superior corrosion resistance. The 4 pc. Pry bar set comes in an easy access tray for a long term storage solution.

The high-carbon steel pry bar made of high carbon steel is ideal for pulling nails.

Get a sturdy pry bar that will give you a superior performance during your work!

Remove the most stubborn of nails with this tool.

Use this chalk line reel with metal case to make your chalk markings on your construction sites.

Be prepared and get this practical 100 ft polyester replacement line for chalk reel. ** Please note that this product may not be available individually from your store. **

Make accurate markings when building rafters, roof layouts, stair layouts, and more.

The STRAIT-LINE SPEEDLINE PRO chalk reel is designed for fast, efficient marking over a 100-foot length. Featuring a 6:1 gear ratio, it offers ultra-fast rewinding, minimizing pauses during use. Its high-strength line and steel handle ensure durability, while the ABS rubber-moulded housing provides shock resistance. The innovative design reduces knots and fraying, ensuring extended use. This model includes a docking station for compact storage and easy use, even with gloves.

Permanent 1/8" stamped graduations include rafter square layout with tables and Essex board measure.

Milwaukee chalk reels provide users with the most durable and best performing chalk reels on the market today. Featuring exclusive StripGuard clutch combined with power tool inspired planetary gear system, providing the longest gear life in chalk reels. For added productively, Milwaukee chalk reels features fast retraction ratio of 6:1. High strength braided bold line creates clear, bold lines and resist abrasion from tough jobsite conditions.

Milwaukee chalk reels provide users with the most durable and best performing chalk reels on the market today. Featuring exclusive StripGuard clutch combined with power tool inspired planetary gear system, providing the longest gear life in chalk reels. For added productively, Milwaukee chalk reels features fast retraction ratio of 6:1. High strength braided bold line creates clear, bold lines and resist abrasion from tough jobsite conditions.

This 7" rafter square is a versatile tool for builders and contractors. Its thick edge is useful as a saw guide. It can be used directly with the saw against the square for cross cuts or angled cuts using the etched protractor scale.

Milwaukee chalk reels provide users with the most durable and best performing chalk reels on the market today. Featuring exclusive StripGuard clutch combined with power tool inspired planetary gear system, providing the longest gear life in chalk reels. For added productively, Milwaukee chalk reels features fast retraction ratio of 6:1. High strength braided bold line creates clear, bold lines and resist abrasion from tough jobsite conditions.

The STRAIT-LINE 100-foot replacement line provides exceptional robustness, being 2.5 times stronger than traditional chalk lines. Designed for long-lasting use, it is ideal for rough and abrasive surfaces, reducing the risk of breaks.

Find the best angles during the construction of structures or others.

This 100-foot cast aluminum chalk line reel features a sliding door for quick chalk refills, simplifying maintenance. Its built-in hook holder and die-cast metal construction ensure high durability. Ideal for professionals and DIY enthusiasts, this reel guarantees precise lines and effective marking on various surfaces.

The Milwaukee 180 mm metric rafter square has a stronger frame and is the most versatile rafter square. It features scribe notches from 25 mm to 145 mm allowing for easy ripping of lumber. A 25 mm cutout helps prop pipe making it easier to cut on the job sites. A reinforced frame provides durability on the job site and high visibility laser etched markings make it easy to read.

Eliminate the guesswork by quickly replicating irregular shapes or profiles for an exact fit every time. Johnson’s precision contour gauge is equipped with long tines to accurately shape and trace, saving you time and making your job easier. Its built-in locking lever holds the contour securely in place to transfer anywhere you need. Capable of measuring up to 10" this contour gauge is perfect for larger applications and fits around most common pipes and round columns. Featuring a permanently stamped ruler with inch and centimeter increments as a convenient reference guide.

Johnson’s digital t-bevel takes the guesswork out of angle duplication and eliminates problems with analog readings and manual measurement transfer. Measure, hold and transfer interior and exterior angles quickly and accurately. Its durable stainless steel blade is rust resistant, and the impact resistant ABS handle is built to last. Large easy reading LCD can be inverted 180° at the press of a button for precision measurements from 0 to 360°. Practical function modes make it handy for reverse miter angles and holding current values.

Proceed to measure different angles with this adjustable square.

Mark off your residential area with this robust STANLEY chalk line.

Position these stair gauges on a square to make repeated angle cuts.

A chalk line is a tool for marking long.

Locate and transfer any angle from 0 to 360° with this precision sliding T-bevel.

Get this practical, water-resistant FatMax chalkline and pencil set that can hold 4 ounces of chalk

Opt for this carpenter's square to perform precise tasks.

This angle bracket is made from a single piece of impact resistant plastic. The graduations are moulded into the material to last for years.

This carpenter's square has a thick edge, which is handy as a cutting guide. The body is made of solid aluminium with machined edges for increased accuracy and durability.

To develop one of the world's best rafter squares, Johnson first had to engineer the EZ-Read™ finish, its revolutionary anti-glare protective coating that diffracts sunlight rather than reflecting it, so it looks as crisp in full sun as it does in the shade. The EZ-Read™ finish also increases friction to better secure your square against your lumber when using it as a saw guide. The Johnny Square® is highly durable and accurate. Its solid aluminum body construction with CNC machined edges ensure an accurate reading every time. This rafter square also features continuous scribing notches that are ideal for ripping at 1-1/2", 3- 1/2" and 5-1/2" as well as handy markers that measure 2x4 board dimensions of 1-1/2", 3" and 3-1/2".

Thanks to its larger base, you will have a better grip for measuring materials.

Measure right angles with this ABS square.

This Task Support Rod is your extra set of hands while on the job plus an optional extension to suit numerous applications such as drywall, cabinetry, panelling, crown mouldings, HVAC, dust barriers, temporary supports, and more! The patented adjustment and locking mechanism make QSR the toughest and most versatile support rod on the market. The micro-adjustment function works by twisting the rod body to add or reduce length using the reverse threaded feet. With a vertical weight capacity of 66 lb for the long Quick Support Rod, the potential applications are endless.

Perfectly measure right angles with this imperial carpenter's square.

The new Milwaukee 4 1/2" trim square is an everyday carry layout solution. With its 35% more compact size it fits easily into pockets, pouches, and tight work spaces. High visibility laser etched markings will not wear off, providing trusted accuracy throughout the life of the square, while a 1/4" & 3/8" dual measurement heel allows for quick marks.

The Milwaukee 7" magnetic rafter square has a stronger frame and is the most versatile rafter square. It features three rare earth magnets for a secure hold on ferrous materials. Scribe notches from 1" to 6" allow for easy ripping of lumber. A 1" cutout helps prop pipe making it easier to cut on the job site. A reinforced frame provides durability on the job site and high visibility laser etched markings make it easy to read.

The Milwaukee 16" x 24" aluminum framing square is stronger than steel and is the most versatile framing square. It has a 50% thicker frame making it more durable than competitive steel squares. Scribe notches from 1" to 13" allow for easy ripping of lumber. High visibility laser etched markings make it easy to read. Angle finding helps with setting common angles of pipe.

This compact 4 1/2" finish square is ideal for access in tight quarters for finish carpentry, setting saw blades and more. CNC machined from extruded aluminum and finished with the same glare-resistant EZ-Read anodizing process that made our Johnny SquareRM famous, this laser- etched square is durable enough to withstand any jobsite abuse, and is backed by Johnson's best-in-class limited lifetime warranty. This rafter square also features continuous scribing notches that are ideal for ripping lumber from 1-1/2" to 3-1/2" as well as handy markers that measure 2x4 board dimensions of 1-1/2" and 3-1/2".

Johnson's 8" x 12" hi-visibility orange carpenter square features EZ Read numbers and graduations. Its rugged steel construction makes the square durable enough to withstand even the worst jobsite abuse.

Johnson's 16" x 24" hi-visibility orange framing square features EZ Read numbers and graduations. This framing square is everything a builder needs to get the work done quickly, efficiently and accurately. It includes graduations in 1/8", 1/10", 1/12" and 1/16" as well as octagon scales, rafter tables, brace tables and board foot tables, making it useful for any number of different jobs.

Measure a right angle while keeping a good level with this combination square.

Get this combination square to measure right angles and find the perfect level.

The steel square offers many permanently stamped 1/8 in graduations.

Use the try and miter square for 45° and 90° readings, perfect for the handyman in you!

Easily cut drywall with this quality "T"-square.