Hand tools

This wood chisel is the perfect tool for your carpentry and cabinet work.

Accurately measure the length of your furnitures with this meter stick including a conversion table on the back.

This wood chisel is the perfect tool for your carpentry and cabinet work.

This wood chisel is the perfect tool for your carpentry and cabinet work.

This wood chisel is the perfect tool for your carpentry and cabinet work.

The 3-piece wood chisel set is strong and durable. Its hardened, tempered chrome carbon steel blade retains edges. With short series lacquered blades, ergonomically designed, bi-material handles, and blade guard for protection when not in use, these tools are designed to meet the no-excuse demands of both fine woodworkers and professional carpenters.

Ideal for marking metal or making indentations for starting drill holes, one-piece construction forged for strength, hardened, quenched and tempered for long life and durability,powder-coated finish for easy visibility.

Ideal for starting drill holes, One-piece construction forged for strength, hardened, quenched and tempered for long life and durability, powder-coated finish for easy visibility.

The punch and chisel set, is ideal for marking metal or starting drill holes, one piece forged construction for strength, hardened for long life and durability, powder coated for better visibility.

The DEWALT Ergo Aviation snips are designed with a reduced handle span, providing lower level of muscle effort required while cutting tough materials. These tools are traditionally used for cutting aluminum, vinyl siding, screening, cardboard, leather, copper and 18 to 22-Gauge sheet metal. The snip's serrated cutting edge prevent materials from slipping during use and the slip-resistant, bi-material cushion grip ensures a firm, comfortable grip.

An ideal chisel set for general repair use.

Ideal for cutting and splitting hard stone, brick, and concrete. The dual-material ergonomic handguard provides protection against fractures, reduces slippage, and absorbs vibrations.

Cut all kinds of materials thanks to this strong pair of scissors.

Johnson’s traditional dial caliper provides four ways to accurately measure in one versatile tool, including outside, inside, depth and step up to 6”. The graduated dial displays precise measurements in both inches and mm while the non-glare bezel provides clear and easy reading. With its durable fiberglass reinforced nylon construction, this tool is built to withstand rough jobsites. Extend the handy depth rod for quick depth and step measurements including differences in surface elevations.

Johnson’s 6" stainless steel protractor is an essential tool for students, architects, machinists, carpenters, and woodworking hobbyists for accurately marking, measuring, and transferring angles. Constructed of durable stainless steel with permanently etched, highly visible measuring scales. The protractor head has a 0 to 180 degrees semi- circle scale reading in both directions for maximum versatility. Use the 45, 90 and 135 degrees reference markings for quick and precise mitre angles.

Johnson’s stake flags are useful for a variety of above ground marking applications including landscaping, surveying, line locations, construction areas and forestry.  Its durable flag can withstand harsh outdoor environments and the bright colors are highly visible from long distances.  The flags can be quickly and easily secured into the ground with the durable 21" wire stem.

Cutout at bottom of case allows you to control the speed of blade return with your finger. The blade, with graduations of 1/16", offers a standout of 12'.

Ideal for marking metal or making indentations for starting drill holes, one-piece construction forged for strength, hardened, quenched and tempered for long life and durability,powder-coated finish for easy visibility.

Cutout at bottom of case allows you to control the speed of blade return with your finger. The blade, with graduations of 1/16", offers a standout of 12'.

Cutout at bottom of case allows you to control the speed of blade return with your finger. The blade, with graduations of 1/16", offers a standout of 12'.

This gun is a semi-automatic quick-cycle fastener designed for continuous use, high reliability and low maintenance.

Command Control Series Nite Eye tape measure with blade. Cutout at bottom of case allows you to control the speed of blade return with your finger. The blade offers a standout of 12'. The blade with flourescent writing provides excellent visibility in low light situations as well as reducing glare in bright sunshine. Supplied with a tether hole to enable you to work securely at heights. Ergonomic shaped case for better comfort.

The PT-22A is a powder-actuated tool that uses 0.22 caliber “A” crimp loads and that has single-shot firing action.

The PDPA is a powder-actuated hardened steel fastener designed to attach construction elements to concrete, steel and CMU.

The Shockforce measuring tape is the very best tape offered by Lufkin. The blade offers an improved standout of up to 14 feet. Graduated in consecutive inches with markings every 1/16". Heavy duty construction and designed for the professional this tape will resist damage even when dropped from 120 feet on to concrete. Traditional yellow blade with black markings. The lock button is protected on both sides by a metal guard rail. Markings on the underside of the blade are in the vertical position which is ideal for taking vertical mesurements. A tether point on the case allows you to work at heights in full security. A metal lined hole in the base of the tape measure allows you to scribe semi circles. The case is very compact and has a 3" measurement which is very practical when taking interior measurements. The belt clip is removable if you prefer to use the tape in a work pouch.

Get these comfortable utility shears to perfect your garden, workshop and craft.

The PDPA is a powder-actuated hardened steel fastener designed to attach construction elements to concrete, steel and CMU.

The PDPA is a powder-actuated hardened steel fastener designed to attach construction elements to concrete, steel and CMU.

Heavy-Duty Titanium Coated Tradesman Shears with stainless steel blades designed to cut like a knife blade, resists corrosion and is 3 times harder than steel for extra-durability and a longer blade life.. Ribbed lower blade that grips material for cleaner cuts. I ndex finger grip that provides better control and stability, ergonomic design that optimizes handle contact points for maximum comfo rt and control. Cuts paper, cardboard, thick fabrics, rope, leather, plastic and more.

The PDPA is a powder-actuated hardened steel fastener designed to attach construction elements to concrete, steel and CMU.

This set of three aviation snips is a complete kit for making precise and clean cuts on various types of metals. It includes three double-capped snips, suitable for right, left, or straight cutting, while their non-slip handles ensure optimal comfort and safety. Their induction-hardened steel and chrome vanadium blades provide exceptional strength and durability. They can cut up to 1.2 mm of cold-rolled steel or 0.7 mm of AISI 304 stainless steel. They comply with federal ANSI and ASME standards. Their serrated blades ensure slip-free and distortion-free cutting.

The PDPA is a powder-actuated hardened steel fastener designed to attach construction elements to concrete, steel and CMU.

Ideal for cutting, prying or ripping of hardwood flooring and nails. Designed with offset blade and short bite for leverage. Ergonomic, bi-material hand guard helps protect from overstrike, reduces slipping and absorbs vibrations. One-piece construction forged for strength. Heat-treated tip allows for additional sharpening. Hardened, quenched and tempered for long life and durability. Powder-coated finish for easy visibility.

The PDPA is a powder-actuated hardened steel fastener designed to attach construction elements to concrete, steel and CMU.

The PDPA is a powder-actuated hardened steel fastener designed to attach construction elements to concrete, steel and CMU.

This straight edge is a versatile tool useful for all kinds of measurement applications as well as for drawing straight lines.

Two sided blade provides more versatility for a variety of measuring requirements.

The PT-22HA is a hammer-activated tool engineered for low maintenance and economy.

Use these staples for laying hardwood flooring and carpentry.

Get a soft finish on any raw surface with this rasp.

Use these staples for laying hardwood flooring and carpentry.

Use these staples for laying hardwood flooring and carpentry.

Use these staples for laying hardwood flooring and carpentry.

The Crescent H.K. Porter 18 in. PowerPivot Bolt Cutter utilizes double compound action technology to cut soft and hard materials. It features an innovative power link design to deliver incredible cutting power for soft materials up to 3/8 in. diameter and for hard materials up to 9/32 in. Precision engineered cutting blades ensure long life and ultimate durability.

Stainless Steel Scissors Set (5 in, 8 in, 8 in, 10 in)

These aviation bolt cutters are ideal for easy and fast cutting of bolts, nuts, nails, and chains. Their construction with chrome-molybdenum steel ensures exceptional strength and durability. Moreover, their design with interchangeable jaws further extends their lifespan. With their high-leverage design, you can deliver maximum power with minimal effort, while their moulded handles ensure optimal comfort and secure grip.

These aviation bolt cutters are designed for quick and efficient cutting of bolts, nuts, nails, and chains. Their construction with chrome-molybdenum steel ensures exceptional strength and durability. Additionally, their replaceable jaws feature extends their lifespan. With their high-performance leverage mechanism, you can apply considerable force with minimal effort. Furthermore, their ergonomic design with moulded handles ensures optimal comfort and easy handling.

These aviation bolt cutters enable easy and quick cutting of bolts, nuts, nails, or chains. They feature jaws made of chrome-molybdenum steel, a highly resistant and durable material. Their jaws are also replaceable, allowing you to extend the lifespan of your tool. Thanks to their high-leverage design, you can exert maximum power with minimal effort. Their moulded handles provide comfortable grip and ensure secure handling.