Circular saws

This finishing blade leaves a smooth finish requiring little or no sandblasting.

Circular saw blade with 80 carbide-tipped teeth and polished finish for wood cutting applications. Twelve-inch diameter blade with carbide tooth construction for extended service life compared to standard steel teeth. High tooth count configuration suitable for finish cutting in hardwood and softwood materials. Compatible with standard 12" circular saws and compound miter saws requiring smooth cutting performance.

Circular saw blade with 10-inch diameter and 80 carbide-tipped teeth. Carbide tooth construction provides cutting performance in wood materials. Compatible with circular saws accepting 10-inch blade diameter. Tooth configuration suitable for cross-cutting and rip-cutting operations. Manufactured for wood cutting applications including lumber, plywood, and engineered wood products. Standard arbor hole fits most circular saw spindles.

This saw blade is specially formulated to deliver superior cutting performance in the most extreme construction situations.

This Diablo blade is the perfect choice for joiners because it leaves a smooth surface that requires little or no sanding.

The Diablo blade series for aluminum is perfect for corded and cordless saws and non-ferrous metal cutting jobs.

This Diablo blade is perfect for razor cuts in the wood with a minimum of recovery.

Get this high-performance blade that can be sharpened when needed to extend its service life

Ideal for cutting oak, pine, plywood, pressure treated lumber and beams.

This blade is perfect for sawing wood and composites in width and length for a smooth finish.

Ideal for cutting oak, pine, plywood, pressure treated lumber and beams.

This Diablo blade is perfect for razor cuts in the wood with a minimum of recovery.

The Diablo blade series for aluminum is perfect for corded and cordless saws and non-ferrous metal cutting jobs.

This blade with Tracking Point tooth design delivers maximum life and durability with effortless cutting performance.

This blade is perfect for sawing wood and composites in width and length for a smooth finish.

This finishing blade leaves a smooth finish requiring little or no sandblasting.

These blades are specially designed to meet the high demands of ferrous cutting, leaving clean cuts without smudging.

This blade is specifically designed to produce superior cuts in the most extreme construction situations.

These blades have outstanding durability in both long and cross cut applications.

These blades have outstanding durability in both long and cross cut applications.

These blades have outstanding durability in both long and cross cut applications.

Get this versatile circular saw with integrated brake to safely cut your materials.

You will definitely appreciate this circular saw, the lightest in its class.

Diablo's diamond Tuck Point blades provide extreme durability, minimal downtime, increased productivity in mortar joint removal. The disc's industrial-grade diamonds with hardened disc body delivers lasting durability and maximizes cutting quality in hardened materials even in extreme applications.

Diablo's premium high speed masonry cut-off discs provide superior performance and increased productivity. Featuring a premium silicone carbide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

The new Steel Demon Cermet blade cuts both metal and stainless steel while providing 5x the cutting performance than standard metal cutting blades. It is specially formulated with Cermet teeth with a Triple Chip Grind Tooth Design, Laser cut blade bodies, Anti-vibration technology, and Perma-Shield Non-Stick Coating to deliver precise cuts with no sparks and cool, burr-free edges.

12-inch diameter circular saw blade equipped with 40 carbide-tipped teeth for material cutting applications. Carbide tooth construction provides extended cutting performance in wood, plywood, and composite materials commonly used in construction and woodworking. Standard arbor bore size ensures compatibility with circular saw equipment. Tooth geometry and spacing designed for both crosscut and rip cutting operations. Blade specifications optimized for cutting through various wood densities and grain patterns.

Circular saw blade with 10-inch diameter and 40 carbide-tipped teeth. Steel blade body with polished surface treatment. Carbide tooth composition provides extended wear resistance compared to high-speed steel alternatives. Compatible with standard 10-inch circular saws and compound miter saws. Tooth configuration suitable for crosscut and rip cut applications in solid wood, plywood, and composite lumber materials.

Carbide-tipped circular saw blade featuring 40 teeth with 7 1/4" diameter specification. Steel body construction with tungsten carbide cutting edges and polished surface finish. Standard arbor hole configuration for circular saw mounting compatibility. Engineered for cross-cutting and ripping operations in wood materials including dimensional lumber, plywood, OSB, and engineered wood products. Carbide tooth geometry provides extended cutting edge retention compared to high-speed steel alternatives.

Circular saw blade featuring 24 carbide-tipped teeth with polished finish. Blade engineered for wood cutting applications in construction and woodworking. Carbide tooth construction provides extended wear resistance and cutting performance over traditional steel alternatives. Polished surface treatment reduces friction during cutting operations and prevents material adhesion. Standard arbor hole compatibility with circular saw power tools. Suitable for crosscutting and ripping operations in lumber and engineered wood materials.

This 40-tooth carbide circular saw blade delivers precision cutting performance for wood, engineered lumber, and composite building materials. The carbide tooth construction provides extended blade life while maintaining sharp cutting edges through demanding construction and woodworking applications. Its polished surface reduces friction and prevents resin buildup during extended cutting sessions. Ideal for framing, trim work, crosscutting, and general construction tasks where clean, accurate cuts are essential for professional results.

This 24-tooth carbide circular saw blade delivers clean cuts in wood and wood composites. Precision-ground carbide teeth maintain sharpness longer than standard steel teeth, reducing replacement frequency and providing consistent performance. The polished finish reduces friction and heat buildup during cutting operations. Compatible with standard 6 1/2-inch circular saws for framing lumber, cross-cutting boards, and general carpentry applications in residential and commercial projects.

High power motor for maximum cutting efficiency. Large lock-off safety lever prevents accidental start up. Bevel capacity of 50°. Ergonomic soft rubber grip design for vibration absorption and comfortable operation. Items Included: Tool Only. Batteries and Charger Sold Separately.

The 60V MAX* 7-1/4 in. circular saw with electric brake has up to 47% more power than the DCS575 60V MAX* circular saw** with 2456 unit watts out. With a no-load speed of 5800 RPM, this saw delivers the power of a corded circular saw with the portability and convenience of cordless through revolutionary DEWALT FLEXVOLT technology.

Designed for use with Milwaukee 31", 55" and 106" guide rails. Replacement strips attach to bottom of guide rail to keep track from sliding during cuts.

Designed for use with Milwaukee Guide Rails to reduce splintering and tear out when cutting. Compatible with Milwaukee 31", 55", and 106" guide rails. Adhesive Strip for easy attachment.

Milwaukee general purpose track saw blade. The MILWAUKEE Track Saw Blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature a Laser cut body and Laser Cut Vibration Slots to reduce wobble and warping. With an Anti-Friction Coating, the blades resist corrosion and gumming.

Milwaukee general purpose track saw blade. The MILWAUKEE Track Saw Blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature a Laser cut body and Laser Cut Vibration Slots to reduce wobble and warping. With an Anti-Friction Coating, the blades resist corrosion and gumming.

Milwaukee general purpose track saw blade. The MILWAUKEE Track Saw Blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature a Laser cut body and Laser Cut Vibration Slots to reduce wobble and warping. With an Anti-Friction Coating, the blades resist corrosion and gumming.

The Milwaukee Guide Rail is designed to provide precise straight cuts for professional carpenters and professional renovators. Compatible with Milwaukee 6-1/2 in. Track Plunge Saw, the guide rail features anti-slip strips to prevent rail movement during cuts and an anti-burst strip to help make quick cuts. The Guide Rail is also compatible with Milwaukee Rail Clamps, Rail Connectors, and Rail Bag.

Designed for the professional carpenter and remodeler, the M18 FUEL 6-1/2” Plunge Track Saw from Milwaukee delivers the Power to rip solid hardwoods, over 90% dust collection efficiency while providing the portability and precision users demand from a plunge saw. The Powerstate Brushless motor provides 6,300 RPM for finish quality and clean cuts. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. The M18 REDLITHIUM HIGH OUTPUT XC6.0 battery delivers more cuts per charge and great durability than the competition.

The MILWAUKEE M12 FUEL Compact Band Saw Kit utilizes a POWERSTATE Brushless Motor and Constant Power Technology, making it the fastest cutting compact band saw in Unistrut with a cut capacity of 2 1/2" x 2 1/2". The M12 FUEL Compact Band Saw offers a compact design and weighs only six pounds, making it the lightest compact band saw on the market. The M12 FUEL Compact Band Saw offers integrated blade covers, making it suitable for one handed use while offering a larger capacity than the existing M12 Sub Compact Band Saw.

The TE-CS 18/165 Li-Solo cordless circular saw is designed to be both practical and powerful. Lightweight and compact, it’s part of the Power X-Change range, offering complete freedom of movement without cable restrictions. Powered by an 18V lithium-ion battery (not included), it reaches a speed of 4,200 RPM, ideal for precise cuts. Its cutting depth and tilt angle can be adjusted without tools. Equipped with LED lighting and a dust extraction adapter, it ensures comfort and visibility during work.

The 20 V MAX circular saw is equipped with a robust magnesium shoe and a rubber overmolded handle for optimal comfort. With an adjustable bevel from 0 to 50 degrees, it includes a 6 1/2" carbide-tipped blade, allowing precise cuts in double thickness materials at 45 and 90 degrees. Battery and charger not included.

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

This 20V MAX brushless circular saw features a 7 1/4" blade and delivers up to 1,700W of cutting power with 368 cuts per charge. The right-blade orientation and top-handle design provide clear sight lines and control on demanding jobsites. Bevel capacity reaches 57° with preset stops at 45° and 22.5°. Electronic brake stops the blade quickly when the trigger is released. Battery and charger sold separately.

Designed for framing and cross-cutting tasks, this 6-1/2" 18-tooth circular saw blade ensures clean and precise cuts. Its high-density tungsten carbide teeth provide enhanced durability and optimal wear resistance. The anti-vibration slots reduce movement for a superior cutting experience, while the reinforced shoulder increases impact resistance against nail-embedded wood, improving strength and longevity. Lastly, its non-stick coating minimizes friction and debris buildup, optimizing performance on both corded and cordless circular saws.

Designed for professionals who demand power, efficiency and runtime, this 7-1/4" M18 FUEL cordless circular saw features a POWERSTATE brushless motor that delivers up to 6,000 RPM while maintaining consistent speed under load. Combined with REDLINK PLUS intelligence, it provides smart protection against overload and overheating. The kit includes a HD12.0 battery allowing up to 750 cuts per charge. Built with a lightweight magnesium base, the saw comes with a battery, rapid charger, a carrying bag, and can last a full day of work on a single charge.