Electric saws

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

Make clean cuts with these durable Large Diameter Circular Saw Blades that deliver up to 3X life.

Get the performance you expect in a corded saw with the portability of a cordless saw with this Dewalt circular saw.

This finishing blade leaves a smooth finish requiring little or no sandblasting.

The 20 V MAX circular saw is equipped with a robust magnesium shoe and a rubber overmolded handle for optimal comfort. With an adjustable bevel from 0 to 50 degrees, it includes a 6 1/2" carbide-tipped blade, allowing precise cuts in double thickness materials at 45 and 90 degrees. Battery and charger not included.

Designed for power and performance on demanding job sites, this 7-1/4 in. M18 FUEL cordless circular saw combines durability, precision, and runtime. Its POWERSTATE™ brushless motor delivers up to 6,000 RPM, maintaining consistent speed under load. Paired with REDLINK PLUS™ intelligence, it offers active protection against overheating and overload. When used with an HD12.0 battery, it delivers up to 750 cuts per charge, while remaining fully compatible with all M18™ batteries. The lightweight magnesium construction allows for extended use without sacrificing performance.

High power motor for maximum cutting efficiency. Large lock-off safety lever prevents accidental start up. Bevel capacity of 50°. Ergonomic soft rubber grip design for vibration absorption and comfortable operation. Items Included: Tool Only. Batteries and Charger Sold Separately.

The M18 brushless 7 1/4" circular saw delivers up to 40% more power than circular saws with brushed motors while providing up to 30% more run time as well. The Milwaukee built motor, REDLINK electronics and REDLITHIUM XC5.0 battery provide more efficient power delivery, more power and fewer trips to the charger. With 5,000 RPM that 2631 provides smooth cutting and at only 9.0 lbs. it is lighter than most corded saws.

With a cut capacity of 1 5/8" for cutting 2x dimensional lumber, the M12 FUEL 5 3/8" circular saw, delivers up to 170 cuts per charge and up to 2X the motor life of competitive products. With the ability to cut a wide range of common jobsite materials, the M12 circular saw was designed to deliver the power, run time and durability required by professionals. The POWERSTATE brushless motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components.

The MILWAUKEE M12 FUEL Compact Band Saw Kit utilizes a POWERSTATE Brushless Motor and Constant Power Technology, making it the fastest cutting compact band saw in Unistrut with a cut capacity of 2 1/2" x 2 1/2". The M12 FUEL Compact Band Saw offers a compact design and weighs only six pounds, making it the lightest compact band saw on the market. The M12 FUEL Compact Band Saw offers integrated blade covers, making it suitable for one handed use while offering a larger capacity than the existing M12 Sub Compact Band Saw.

The MILWAUKEE M18 6 1/2" Circular Saw provides users with powerful lightweight cutting for a variety of applications including plumbing, electrical, framing, finishing, and carpentry. The cordless circular saw is a high-performance tool that delivers the most durability in a cordless saw. It has a powerful 3,500 RPM motor to quickly and easily cut through tough material such as LVL headers.

The 60V MAX* 7-1/4 in. circular saw with electric brake has up to 47% more power than the DCS575 60V MAX* circular saw** with 2456 unit watts out. With a no-load speed of 5800 RPM, this saw delivers the power of a corded circular saw with the portability and convenience of cordless through revolutionary DEWALT FLEXVOLT technology.

This Atomic circular saw can meet all cutting needs.on the job.

The Tilt Lok handle on Milwaukee's circular saw is the most revolutionary concept for circular saws in years. The eight-position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 Lb. and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side.

Diablo's diamond Tuck Point blades provide extreme durability, minimal downtime, increased productivity in mortar joint removal. The disc's industrial-grade diamonds with hardened disc body delivers lasting durability and maximizes cutting quality in hardened materials even in extreme applications.

Diablo's premium high speed masonry cut-off discs provide superior performance and increased productivity. Featuring a premium silicone carbide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

Diablo's premium masonry cut-off discs provide superior performance and increased productivity. Featuring a premium silicone carbide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

Designed for framing and cross-cutting tasks, this 6-1/2" 18-tooth circular saw blade ensures clean and precise cuts. Its high-density tungsten carbide teeth provide enhanced durability and optimal wear resistance. The anti-vibration slots reduce movement for a superior cutting experience, while the reinforced shoulder increases impact resistance against nail-embedded wood, improving strength and longevity. Lastly, its non-stick coating minimizes friction and debris buildup, optimizing performance on both corded and cordless circular saws.

Designed for professionals who demand power, efficiency and runtime, this 7-1/4" M18 FUEL cordless circular saw features a POWERSTATE brushless motor that delivers up to 6,000 RPM while maintaining consistent speed under load. Combined with REDLINK PLUS intelligence, it provides smart protection against overload and overheating. The kit includes a HD12.0 battery allowing up to 750 cuts per charge. Built with a lightweight magnesium base, the saw comes with a battery, rapid charger, a carrying bag, and can last a full day of work on a single charge.

This circular saw blade is perfectly suited for framing, cross-cutting, and precision finishing applications. Its high-density tungsten carbide teeth ensure exceptional durability and clean cuts. Designed to reduce vibrations, it provides superior comfort even during extended use. The non-stick coating minimizes friction and residue buildup, while its reinforced shoulder allows worry-free cutting on nail-embedded wood. Compatible with both corded and cordless circular saws, it is ideal for professionals and demanding DIY enthusiasts.

This 24 teeth carbide circular saw blade is perfect for construction.

Milwaukee track clamps are designed to be used with Milwaukee guide rails. Used to secure guide rails to the material to eliminate the chance for the track to move during your cut. Easy thread actions and a comfortable rubber handle make locking your guide rail into position quick and simple. Compatible with Milwaukee 31", 55" and 106" Guide Rails.

Milwaukee general purpose track saw blade. The MILWAUKEE Track Saw Blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature a Laser cut body and Laser Cut Vibration Slots to reduce wobble and warping. With an Anti-Friction Coating, the blades resist corrosion and gumming.

Milwaukee general purpose track saw blade. The MILWAUKEE Track Saw Blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature a Laser cut body and Laser Cut Vibration Slots to reduce wobble and warping. With an Anti-Friction Coating, the blades resist corrosion and gumming.

Milwaukee general purpose track saw blade. The MILWAUKEE Track Saw Blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature a Laser cut body and Laser Cut Vibration Slots to reduce wobble and warping. With an Anti-Friction Coating, the blades resist corrosion and gumming.

Milwaukee general purpose track saw blade. The MILWAUKEE Track Saw Blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature a Laser cut body and Laser Cut Vibration Slots to reduce wobble and warping. With an Anti-Friction Coating, the blades resist corrosion and gumming.

Milwaukee general purpose track saw blade. The MILWAUKEE Track Saw Blades were specifically designed to exceed the expectations of contractors for cut quality and accuracy while also delivering a longer life even in the most demanding plunge cut applications. The blades are designed utilizing application-specific Cobalt Infused Tungsten Carbide to extend cutting life and maintain tip sharpness. The blades feature a Laser cut body and Laser Cut Vibration Slots to reduce wobble and warping. With an Anti-Friction Coating, the blades resist corrosion and gumming.

Designed for use with Milwaukee 31", 55" and 106" guide rails. Replacement strips attach to bottom of guide rail to keep track from sliding during cuts.

Designed to be used with Milwaukee guide rails, these connectors allow you to join guide rails to extend their length and make a wider range of cuts. Compatible with Milwaukee 31", 55", and 106" guide rails.

Designed for use with Milwaukee Guide Rails to reduce splintering and tear out when cutting. Compatible with Milwaukee 31", 55", and 106" guide rails. Adhesive Strip for easy attachment.

This 8" 42 tooth blade is designed to cut a variety of ferrous materials 3/32" and thicker, including pipe, angle iron, steel studs and conduit. The blade has vibration damping which reduces heat, sparks and noise for cleaner smoother, burr free cuts. Use with Milwaukee dry cut saw (6370 20).

This 8" 50 tooth blade is designed to cut a variety of ferrous materials 3/32" and thinner including aluminum the blade has vibration damping which reduces heat, sparks, and noise for cleaner, smoother, burr free cuts. Use with Milwaukee dry cut saw, (model 6370 20).

Milwaukee's wood cutting, ultra fine finish blades provide a smooth finish and cutting efficiencies to improve your productivity. A high ATB tooth pattern provides a superior finish with minimal tear out in the cut material. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. 10" blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

Milwaukee's wood cutting, framing blades maximize life and cutting efficiencies to improve your productivity. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

This 14" 72 tooth blade is designed to cut a variety of ferrous materials including pipe, angle iron, metal studs and conduit. The blade has vibration damping which reduces heat, sparks and noise for cleaner smoother, burr free cuts. For use with Milwaukee dry cut machine (6190 20).

Milwaukee's wood cutting, fine finish blades provide cleaner cuts and cutting efficiencies to improve your productivity. An ATB tooth pattern minimizes tear out in the cut material. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

The MILWAUKEE 10" 80T Metal Circular Saw Blades are specifically designed to exceed contractor's expectations for blade life, cut quality, and speed in the most demanding metal cutting applications – without a lubricant. The metal cutting circular saw blades have hand tensioned hardened alloy steel bodies. This extends blade life and delivers the highest quality cuts available. The blades have Carbide Tipped Teeth with Alternate Top Bevel grind to shear through metal delivering burr free, cool to touch cuts.

Milwaukee's wood cutting, combination blades provide cleaner cross cuts and faster ripping to improve your productivity. An aggressive ATB R tooth pattern minimizes tear out in the cut material while increasing the speed of cut. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. 12" blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

Milwaukee's fiber cement cutting circular saw blades provide significantly longer life than competitive Carbide tipped blades when cutting fiber cement materials. The polycrystalline diamond (PCD) tips deliver up to 75X the life of a traditional Carbide tipped blade. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

Milwaukee's wood cutting, fine finish blades provide cleaner cuts and cutting efficiencies to improve your productivity. An ATB tooth pattern minimizes tear out in the cut material. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. 12" blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

Milwaukee's wood cutting, ripping blades provide faster ripping to improve your productivity. An aggressive ATB tooth pattern minimizes tear out in the cut material while increasing the speed of cut. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. 10" blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

This 14" 90 tooth blade is designed to cut light gauge ferrous materials and stainless steel. The blade has vibration damping which reduces heat, sparks and noise for cleaner, smoother, burr free cuts. For use with Milwaukee dry cut machine (6190 20).

Milwaukee's wood cutting, framing blades maximize life and cutting efficiencies to improve your productivity. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

Milwaukee's wood cutting, fine finish blades provide cleaner cuts and cutting efficiencies to improve your productivity. An ATB tooth pattern minimizes tear out in the cut material. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. 10" blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use. A thin Kerf design delivers faster cuts as well as more cuts per charge when using a cordless tool.

The MILWAUKEE 7 1/4" 48T Metal Circular Saw Blades are specifically designed to exceed contractor's expectations for blade life, cut quality, and speed in the most demanding metal cutting applications – without a lubricant. The metal cutting circular saw blades have hand tensioned hardened alloy steel bodies. This extends blade life and delivers the highest quality cuts available. The blades have Carbide Tipped Teeth with Alternate Top Bevel grind to shear through metal delivering burr free, cool to touch cuts.

The MILWAUKEE 6 1/2" 48T Metal Circular Saw Blades are specifically designed to exceed contractor's expectations for blade life, cut quality, and speed in the most demanding metal cutting applications – without a lubricant. The metal cutting circular saw blades have hand tensioned hardened alloy steel bodies. This extends blade life and delivers the highest quality cuts available. The blades have Carbide Tipped Teeth with Alternate Top Bevel grind to shear through metal delivering burr free, cool to touch cuts.

Milwaukee's wood cutting, general purpose blades maximize life and cutting efficiencies to improve your productivity. An anti friction coating keeps the blade cool while cutting and resists corrosion & gumming. Laser cutting technology creates the blade from 100% sheet steel to ensure a stable blade that increases cutting accuracy. 12" blades are ring tensioned to further stabilize the blade. Laser cut vibration slots minimize wobble and warping during use.