Corded And cordless power tools

This M18 FUEL 1/2" high-torque impact wrench, with a friction ring, is the most powerful in its class. It delivers up to 1200 ft-lbs of fastening torque and 1600 ft-lbs of nut-busting torque, while remaining compact at only 7.6". The POWERSTATE brushless motor ensures exceptional performance, and its DRIVE CONTROL feature offers four modes for greater precision. With an integrated LED light and AUTO SHUT-OFF mode, this impact wrench is ideal for tight or dark spaces requiring demanding work.

The most compact hammer drill driver in its class is more powerful than the competition. Built with a Milwaukee 4 pole frameless motor, the M18 compact 1/2" drill driver delivers 500 in lbs of torque and up to 1,800 RPM. At only 7 1/4" length, this drill driver allows you access to the tightest workspaces. An all-metal gear case and 1/2" metal chuck provide maximum durability, even on the most challenging work sites.

The MILWAUKEE M12 FUEL 1/4" Hex Impact Driver is the Fastest Subcompact Impact Driver, the Most Compact, and provides Maximum Workspace Visibility. The POWERSTATE Brushless motor delivers the fastest driving speeds in the subcompact class for unmatched productivity. At only 5" long and 7.6" tall (with M12 CP 2.0 Ah battery), this solution is the most overall compact impact driver in class, allowing greater access in tight spaces and overall portability.

The M18 Dual-Bay Super Charger charges your M18 batteries up to 6 times faster. In just 15 minutes, you can charge an M18 REDLITHIUM FORGE XC6.0 battery to 80%, allowing you to get back to work quickly. With CHARGE ADAPT, it optimally distributes charging power between the two ports. Compatible with COOL-CYCLE, it ensures rapid cooling to extend battery life. REDLINK intelligence also monitors voltage, temperature, and charge status for superior performance and safety.

The MILWAUKEE M12 FUEL 1/2" Hammer Drill is the Most Powerful Subcompact Drill Driver, the Most Compact in size, and providing the Fastest Speed Under Load. The MILWAUKEE POWERSTATE brushless motor delivers the most power for the capability to perform the widest variety of applications in high speed for unrivaled subcompact performance. At only 5.9" in length, this portable drill is the shortest solution in class offering most access into tight spaces.

The 80-volt Greenworks Pro Max provides immediate and cordless power for outdoor work, reducing vibrations and environmental noise compared to gas-powered models. Maintain your yard with performance comparable to gas tools but at a significantly lower cost!

The M12 FUEL installation drill/driver kit features 4 dedicated solutions, delivering unrivaled access and control with up to 300 in lbs of max torque. Four dedicated heads, including a 3/8" chuck, offset driver, 1/4" hex, and right angle, can attach in 16 different positions.

The 80-volt Greenworks Pro Max ensures instant performance for outdoor needs, reducing vibrations and noise compared to gas-powered tools, thereby offering equivalent performance at a lower cost.

The DCB094K USB Charging Kit is a breakthrough in charging convenience. The USB Charger is equipped with a 100-Watt bi-directional USB-C Power Delivery port, which allows you to charge your DEWALT 20-Volt MAX and FLEXVOLT battery-packs, and output power to charge a range of your personal devices up to 100-Watt.

Makita's DFS452Z, 18V LXT Li-Ion Cordless Drywall Screwdriver (tool only) breaks new ground for drywall contractors.

This 18-gauge cordless brad nailer measures 3.47" x 10.16" x 9.41" and weighs 4.6 lb with battery. Powered by the M12 platform, the nitrogen air spring mechanism drives 5/8" to 1-1/2" brad nails into hard and soft materials with consistent depth. Delivers over 700 nail fires per charge. Compatible with all M12 REDLITHIUM batteries. Designed for trim carpentry, cabinetry, and finish work requiring clean, precise nail holes.

This 20V Max Starter Kit includes a DeWalt Powerstack battery and a charger. The Powerstack battery offers a 25% more compact design while delivering up to 50% more power. Additionally, it provides twice as many charge cycles for increased durability. Equipped with a rubber base, it offers protection against shocks, enhanced stability, and better insulation against temperature fluctuations and electrostatic discharges. The charger is compatible with all DeWalt 12V Max, 20V Max, and Flexvolt batteries.

This roofing nailer features POWERSTATE Brushless technology and a nitrogen pneumatic spring, delivering a high firing rate of 6 nails per second. Its M18 REDLITHIUM battery provides up to 1,100 nails per charge, maximizing job site productivity. Designed for roofing and vinyl siding applications, it offers tool-free adjustment, dry-fire lockout, replaceable wear pads, and a convenient hook to adapt to all your tasks.

The 18-gauge cordless finishing nailer 4257796 is the ideal tool for your renovation and refurbishing projects. It offers total flexibility thanks to its compatibility with the Power X-Change range, allowing for single or continuous firing modes. The "PressAir" technology and robust gearing ensure up to 60 shots per minute, while the driving depth is adjustable for precise work. Convenient and ergonomic, it features a 100-nail magazine with a fill indicator, LED lighting, and a belt clip.

The PACKOUT M12 Battery Rack features clip in battery storage that keeps batteries securely held in place. Connectivity with all PACKOUT solutions enables you to fully customize your shop. This M12 Battery Rack is optimized to store up to 4 M12 batteries of any size. MILWAUKEE PACKOUT is the industry's most versatile and durable modular storage system.

The DW46RN coil nailer is the ideal tool for installing asphalt shingles on roofs. Designed to maximize productivity, it allows you to drive up to 120 nails before each reload, offering increased efficiency on job sites. Its compact and ergonomic design facilitates handling, while the quick and effortless loading of spiral-collated nails saves time. A reliable ally for fast and precise roofing work.

Delivers up to 2X more runtime, 20% more power and 2X more recharges than standard lithium ion batteries. The M12 REDLITHIUM 2.0 compact battery pack features superior pack construction, electronics and performance to deliver more work per charge and more work over pack life than any battery on the market. It offers 2.0 amp hours of runtime.

The MILWAUKEE M12 REDLITHIUM HIGH OUTPUT CP2.5 Battery Pack delivers 25% more power and runs 25% cooler than other Milwaukee M12 REDLITHIUM CP battery packs. This increased performance of the lithium ion battery gives you the same power and runtime of a MILWAUKEE M12 REDLITHIUM XC battery in a lighter and more compact package. The 12 volt battery pack delivers fade free power and runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications.

This 20V MAX XR cordless tool set includes a brushless motor hammer drill, providing up to 75% more runtime, as well as a compact 3-speed impact driver, perfect for tight spaces. The set also features a circular saw delivering a consistent speed of 5,200 RPM under load, while the compact reciprocating saw makes cuts in narrow areas effortless. This set is completed by a 110-lumen LED light to efficiently illuminate your workspace. Perfect for professionals and demanding DIY enthusiasts.

This 20V MAX XR cordless framing nailer kit is designed for paper-collated nails up to 3 ½ inches. Lightweight and compact, weighing just 8.65 lb, it eliminates the hassle of hoses and compressors for total independence. Its brushless motor ensures enhanced durability, while the redesigned nosepiece allows precise nailing, even in challenging angles. With the ability to cover up to 530 sq. ft. of subflooring or 100 sq. ft. of framing per charge, it’s perfect for various projects and includes a battery, charger, carrying bag, and additional tools.

Delivers up to 3X more runtime, 20% more power and 2X more life than standard lithium ion batteries. The M12 REDLITHIUM 3.0 compact battery pack features superior pack construction, electronics and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. With Milwaukee durability built into each pack, this battery runs cooler and performs in climates below 0°F/ 18°C.

This 20V MAX XR cordless framing nailer is compatible with paper-collated nails up to 3 ½ inches. Compact and lightweight (8.65 lb), it eliminates the need for hoses and compressors, allowing you to work independently. Its brushless motor ensures better reliability, while the innovative nosepiece facilitates angled nailing, even in tight corners. With a magazine capacity that allows fastening up to 530 sq. ft. of subflooring or 100 sq. ft. of framing per charge, it is ideal for various construction tasks such as framing, sheathing, and subflooring.

Our Cordless 23GA Pin Nailer is capable of driving up to 1-1/2-inch pin nails sub flush into solid oak material. The tool is compatible with 23GA pin nails up to 1-1/2-inch in length and has a magazine capacity of 100. The nailer is 100% Battery Powered and works with all DEWALT 20V MAX Batteries eliminating the Hassle of Using Gas, Compressor, and Hose. It is also outfitted with Tool-Free Jam Release and Tool-Free Depth Adjustment for Driving Recessed Fasteners.

Improving run time, power and speed; the M12 XC high capacity REDLITHIUM battery will provide 2X the run time and increased performance as compared to the M12 compact REDLITHIUM battery pack in all M12 tools. Milwaukee REDLITHIUM batteries are the next generation in lithium ion technology.

The Milwaukee M18 FUEL 30-degree framing nailer has a nitrogen spring mechanism, POWERSTATE brushless motor, and REDLINK Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. The cordless framing nailer uses only Milwaukee's REDLITHIUM batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and associated maintenance.

The portable power supply provides 3600 peak watts, 1800 continuous watts of pure sine inverter energy, powering everything from high demand 15A tools to sensitive electronics. The compact size, no emissions, and quiet operation of the power supply unit allow it to be used safely in confined spaces indoors. The metal roll cage delivers durability for outdoor jobsite use.

The Milwaukee M18 FUEL 18-gauge brad nailer kit delivers peak productivity, providing unmatched nailing performance without the hassle of a compressor and hose. Using a nitrogen air spring mechanism, the finish nailer consistently sinks nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of Milwaukee's POWERSTATE brushless motor and REDLINK Plus intelligence delivers unmatched fire rate with zero ramp up time for all day efficiency.

With its powerful 140 Nm (1,240 in-lb) torque, the TE-CI 18/1 Li-solo 1/4" cordless impact driver from the Power X-Change range offers total flexibility. Thanks to its ergonomic, compact, and lightweight design, it ensures comfortable work and reduces physical fatigue. Its electronic speed control adapts to materials, while the integrated LED lighting enhances visibility. Perfect for a wide range of household and workshop tasks. Includes a 2.0 Ah battery, charger, and carrying bag.

Delivers up to 2.5X more run time, 20% more power and 2X more life than standard lithium ion batteries. The M18 REDLITHIUM XC 5.0 extended capacity battery pack features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. The M18 REDLITHIUM XC 5.0 battery features an advanced design, protecting the pack against harsh jobsite environments.

The MILWAUKEE M18 FUEL 1/2" Mid Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 600 ft lbs of nut busting torque and only weighs 5.0 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can’t fit without needing to disassemble components to reach bolts.

The Milwaukee M18 FUEL 30-degree framing nailer kit has a nitrogen spring mechanism, POWERSTATE brushless motor, and REDLINK Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp up time, firing a nail as soon as the trigger is pulled.

Makita's 18V LXT Brushless Impact Driver combines power and run-time for a full range of fastening tasks. The efficient Makita BL Brushless Motor is electronically controlled and engineered for longer run time, increased power and speed, and longer tool life. The variable speed brushless motor delivers up to 1,500 in.lbs. of max torque for efficient fastening. It has a compact design at 5" long and weighs only 3.3 pounds (with battery, not included) with an ergonomic soft grip for user comfort. The LED light illuminates the job area for applications in dark spaces.

The MILWAUKEE M12 23 Gauge Pin Nailer Kit features the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23-gauge pin nailer provides unmatched productivity and accessibility into tight spaces and confined corners with a lightweight, ergonomic design.

The Milwaukee M18 FUEL 18-gauge brad nailer delivers peak productivity, providing unmatched nailing performance without the hassle of a compressor and hose. Using a nitrogen air spring mechanism, the finish nailer consistently sinks nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail.

Tackle fastening and automotive work with this 18V cordless impact wrench. A brushless motor and up to 3,540 in/lbs (400 Nm) of torque deliver reliable power for loosening wheel nuts and driving long fasteners. Three speed settings let you match output to the task. The 1/2" external square drive accepts common impact sockets, while the integrated LED brightens dim areas. A 1/4" bit adapter and three sockets (17, 19, 21 mm) are included. Battery and charger are sold separately.

This 20V MAX 15 cordless coil roofing nailer delivers cordless convenience ideal for service repairs and small jobs.

The DEWALT DCN680 nailer is designed to drive 18 gauge nails from 5/8" to 2-1/8". Its low nail profile prevents dry firing and unwanted marks, combined with a tool-free depth adjustment for precise countersinking. The micro-nose improves the line of sight and nail placement accuracy, while its LED light illuminates the work surface. It is ideal for discreetly fastening decorative mouldings, cabinets, kitchen ceilings, and shoe mouldings. Includes 2Ah battery, charger, and carrying case.

The ATOMIC 20V MAX 1/2 in. Cordless Impact Wrench was designed easily to handle various fastening projects. This 1/2" impact wrench weighs less than 2.5lbs and is under 5 in length to help reduce user fatigue and allows for access into hard to reach spaces.

The charger holds up to 6 batteries at a time, and charges them sequentially, one at a time. The charger also offers a compact design, integrated hang holes for vertical mounting, and a pass through plug to conserve outlet space. The new unit will charge M18 compact batteries in 30 minutes, and extended capacity (XC) batteries in 60 minutes.

The M18 Dual Bay Simultaneous Rapid Charger is capable of charging two batteries at once, over 3X faster than standard sequential chargers. The charger accepts all MILWAUKEE M18 batteries. This compact battery charger is equipped with REDLINK Intelligence that communicates directly with M18 batteries to monitor cell voltage, temperature and charge status to deliver the best combination of charge duration and pack lifespan.

Designed for demanding mechanical tasks, this M12 FUEL 3/8 in. Stubby Impact Wrench offers an ideal balance of power, compact size, and control. Its POWERSTATE™ brushless motor delivers up to 550 ft-lbs of breakaway torque, with speeds reaching 3,000 RPM. Weighing just 2.2 lb and featuring an ultra-compact head, it easily fits into tight spaces while reducing user fatigue. The built-in triple LED lighting eliminates shadows, while the 4-mode DRIVE CONTROL™ system provides precise output adjustment for every application.

This nail gun assembly allows to perform its tasks in safety and performance.

The MILWAUKEE M18 PACKOUT Six Bay RAPID Charger is the first dedicated charging solution compatible with MILWAUKEE PACKOUT modular storage system. This Six Bay RAPID Charger charges two batteries simultaneously, up to 40% faster than other Milwaukee Tool standard rate chargers. Manage six batteries and consolidate your charging experience. Spend less time swapping batteries on the jobsite.

This impact driver is equipped with a brushless motor that offers increased performance and autonomy. Powerful and compact, it is ideal for screwing and drilling tasks. It features a convenient 1/4" hexagonal chuck that allows for easy bit changes and comes with integrated LED lighting, illuminating the work area. It operates with a 20 V MAX Lithium-Ion battery, which charges quickly with the provided charger.

The M18 and M12 multi voltage charger accepts all M18 and M12 batteries, minimizing the need for extra chargers on the jobsite. This Combo charger requires less time to manage charge cycles, by sequentially charging the battery packs.

The M18 REDLITHIUM HIGH OUTPUT XC8.0 battery pack provides 50% more power and runs 50% cooler vs M18 REDLITHIUM XC battery packs. The optimized combination of size and increased power provides a great solution for the entire range of M18 products.

The M18 REDLITHIUM 2.0 compact battery pack features superior pack construction, electronics and performance to deliver more work per charge and more work over pack life than any battery on the market. It offers 2.0 amp hours of runtime.

The 1/2" cordless impact wrench 4510062 is the ideal choice for vehicle maintenance. With an impressive 1,770 in-lb torque, it easily loosens even the toughest nuts, simplifying seasonal tire changes. Its brushless motor provides increased power and a longer lifespan compared to conventional models. As part of the Power X-Change family, it is designed to use batteries from the range. Its lightweight design and ergonomic handle ensure easy handling. Supplied with a 1/2" square bit holder, it does not include a battery or charger.