Corded And cordless power tools

Transform your Makita screwdriver into a collated screwdriver with this attachment featuring an automatic feed system. It incorporates advanced technologies, including a patented corner feed system, improved feed return, and tool-free screw length adjustment. This accessory ensures fast and precise installation, with optimal screw depth achieved on the first try. Perfect for drywall (on wood or steel studs), metal framing, siding, and cement boards.

Transform your Dewalt screwdriver into a collated screwdriver with this automatic feeding attachment. Designed for DCF620 and DCF630 models, it features innovative technologies, including a patented corner-feed system, optimized feed return, and tool-free screw length adjustment. This accessory ensures fast and precise installation, driving screws deeply on the first try. Perfect for drywall (in wood or steel studs), metal framing, siding, and cement boards.

The Marksman Pro X1 tool streamlines the installation of EDGE hidden fasteners on square pressure-treated wood, cedar, composite, or PVC deck boards. Designed for boards 5 ¼ in. to 5 ¾ in. wide, it creates a consistent 1/16 in. gap, ensuring an even finish across the surface. Screw guides drive fasteners directly into the board edge, reducing the risk of cracks. Compatible with EDGEX screws, this tool ensures efficient and accurate installation—even on boards with secondary joists.

The Milwaukee collated magazine was designed to work with the M18 FUEL drywall screw gun to increase productivity. It feeds screw strips smoothly and has a tapered nose cone to fit into compact spaces. The screw depth adjustment is flushed so that it is not accidentally adjusted. The screw length adjustment works with screws up to 2" and all major brands. The auto start mode on the M18 FUEL drywall screw gun continues to work with the attachment while reducing noise between screws and providing 3X longer life.

Compact and handy, this cordless high-pressure inflator runs on an 18V platform for quick top-offs on car tires, bike tires, and sports balls. Set a precise target on the clear digital gauge and the tool shuts off automatically at the chosen pressure, up to 160 PSI (11 bar). Choose your units in bar, PSI, or kPa, or switch to manual inflation anytime. A 23" hose with tire valve provides flexible reach, and a 3-piece adapter kit stores on the tool. An ergonomic handle supports comfortable use. Battery and charger are not included.

Built for small to medium projects, this cordless 18V HVLP sprayer applies paints, stains, detergents, wood grain fillers, and oils with consistent coverage. The motor delivers up to 650 ml/min, while the adjustable air cap provides vertical, horizontal, or circular spray patterns. A spray regulator sets material output for better control. Comfort and upkeep are easy with a softgrip handle and a removable spray head. Accessories include two nozzles, a 100 ml viscosity cup, a cleaning brush and needle, plus an 800 ml graduated container with lid and a hanging hook. Battery and charger sold separately.

Handle renovation and finish tasks with this 18V cordless oscillating multi-tool. Its brushless motor delivers more power and longer runtime than brushed designs, while the 3.2° oscillation angle and electronic speed control support precise results. Swap accessories tool-free using the quick-release lock and a magnetic 12-pin adapter for flexible positioning. An LED worklight and lock-on switch aid extended work. A decoupled battery mount and soft-grip surfaces help reduce vibration for comfort. Supplied with a sanding plate with hook-and-loop and 9 sheets (3×60, 80, 120 grit), a scraper, HCS and bi-metal plunge blades, HSS and diamond segment blades. Battery and charger sold separately.

Built for tight spaces, this 18V cordless 3/8" ratchet delivers 60 Nm (531 in-lb) of torque with precise variable speed control. A compact, low-profile head, large-area trigger and ergonomic softgrip handle support comfortable use from multiple grip positions. The forward/reverse selector on the head and a robust 3/8" square drive with detent ball simplify fastening and removal. An integrated LED illuminates the work area. The tool also works as a manual ratchet. Includes a 3/8" to 1/2" adapter. Battery and charger sold separately.

Built for quick, precise inflation on the go, this M18 cordless inflator delivers up to 150 PSI for passenger, light truck, and other medium‑duty tires. A high‑efficiency motor can top off 33" light truck tires in under 1 minute. The unit includes memory settings for four pressure presets, a 36" hose with a full-brass Schrader chuck, and anti-vibration feet for stable operation. Integrated storage for the hose and nozzle helps keep the tool organized once the work is done.

Speed up your fastening tasks with the Quik Drive Project Pro. This tool drives screws up to four times faster than traditional screwdrivers, making it ideal for repetitive jobs like decking, fencing, flooring, and home renovations. Lightweight and easy to attach, it works with most cordless drills and drive motors, and installs collated screws from 1-5/8 in. to 2-1/2 in. For outdoor projects, use Deck-Drive DSV screws; for indoor subflooring, use Strong-Drive WSV screws. Backed by expert support, Project Pro helps you save time and effort on every job.

With a speed of 20,000 RPM, the 20V MAX XR 3" brushless cut-off tool is perfect for quickly cutting metal, tile, plastic, and drywall. Its quick-change wheel feature includes an integrated hex key storage and spindle lock. Adjust the cutting direction based on the application, and enjoy enhanced visibility with the integrated LED light. The dust shroud and AirLock connection simplify dust extraction with DEWALT extractors and are compatible with Tool Connect tracking technology. Chip and lanyard available separately.

Diablo's premium high speed masonry cut-off discs provide superior performance and increased productivity. Featuring a premium silicone carbide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

Tackle demanding jobs with this high-performance ATOMIC 20V MAX* 5/8 in Brushless Cordless SDS Plus Rotary Hammer. The DEWALT brushless motor and durable German-engineered mechanism deliver 1.4 Joules of impact energy. The lightweight and compact design makes this tool ideal for rod hanging, concrete forming, cable tray and strut mounting, clip and bracket mounting, and railing mounting.

Ideal For Welding and Forming Plastics, Heat Shrink Tubing, Soldering Copper Pipe, Bending Plastic Pipe, Thawing Metal Pipes, Activating/De- Activating Adhesives and Putties, Stripping Paint And More! 2-stage air volume and temperature control provides versatility in a wide range of applications.

The SDS-PLUS SLEDGE 1 7/8" Tile Chisel stays sharper longer. Reinforced edges deliver maximum durability and reduced wear over the life of the chisel. These chisels have been engineered to maintain sharper edges for increased productivity with an angled head designed for prying tile, ideal for removing tiles, mortar, laminate, and other composite materials in remodeling projects. No re-sharpening or re-hardening is necessary, reducing downtime.

The SDS-PLUS SLEDGE 1 1/2" X 10" Flat Chisel stays sharper longer. Reinforced edges deliver maximum durability and reduced wear over the life of the chisel. Those chisels have been engineered to maintain sharper edges for increased productivity with longer tip lengths vs. standard chisels for maximum life. The SLEDGE Flat Chisel is ideal for general chipping and breaking concrete. No re-sharpening or re-hardening is necessary, reducing downtime.

The SDS-PLUS SLEDGE 3/4" X 10" Flat Chisel stays sharper longer. Reinforced edges deliver maximum durability and reduced wear over the life of the chisel. Those chisels have been engineered to maintain sharper edges for increased productivity with longer tip lengths vs. standard chisels for maximum life. The SLEDGE Flat Chisel is ideal for general chipping and breaking concrete. No re-sharpening or re-hardening is necessary, reducing downtime.

The SDS-PLUS SLEDGE 10" Bull Point Chisel stays sharper longer. Reinforced edges deliver maximum durability and reduced wear over the life of the chisel. These chisels have been engineered to maintain sharper edges for increased productivity with longer tip lengths vs. standard chisels for maximum life. The SLEDGE Bull Point Chisel is ideal for starting holes, general chipping, and breaking concrete. No re-sharpening or re-hardening is necessary, reducing downtime.

The MILWAUKEE SDS PLUS SLEDGE 3/8" Mortar Knife stays sharper longer. The reinforced edges deliver maximum durability and reduced wear over the life of the chisel, engineered to maintain shape for increase productivity.The optimized 3/8” profile for is ideal for removing mortar between horizontal & vertical bricks, with a precisioned forged tip fo rpreserving decorative stone and brickwork. No re sharpening or re hardening is necessary for reduced downtime.

The most compact 5/8 in. hammer drill on the market is 30% lighter and 65% faster – with plenty of drilling power. At just 10.9 in. long and 4.6 Lbs., Milwaukee Tool 5/8 in. SDS-Plus rotary hammer makes drilling overhead and in tight spaces easier, yet it’s powerful enough for most professional applications. With a 5.5 amp motor, it delivers 0-3, 700 RPM, 0-4,400 bpm and 1.5 ft-lbs of torque. A mechanical clutch protects the motor when the bit binds, and two-mode operation offers maximum versatility regardless of the application. The kit includes a side handle, depth rod and carrying case.

The M18 FUEL 18ga 1/4” Narrow Crown Stapler delivers peak productivity on your job site, providing you with unmatched stapling performance without the hassle of a compressor and hose. We’ve leveraged our nitrogen air spring mechanism, to give the Narrow Crown Stapler the power to consistently sink staples to the proper depth in hard materials. This cordless stapler also has tool free depth adjustment to drive staples in soft materials without blowing through. You can choose from sequential and contact actuation firing modes to meet your application’s needs.

The M18 cut out tool is the fastest, most compact tool in the market. With 4 pole motor this tool delivers up to 20% faster cuts than other tools in the market. The REDLINK Intelligence provides overload protection to defend against abusive situations. The REDLITHIUM 3.0 Ah battery provides up to 120 outlet boxes per charge. The best in class ergonomics allow for increased comfort during all day work.

The M18 compact heat gun performs applications quickly by reaching operational temperature in less than 7 seconds. As the most compact cordless heat gun in the market, it can go places where corded heat guns can’t. The guarded nozzle and ladder hook prevent the tool from coming in contact with unprotected surfaces. Powered by REDLITHIUM battery technology, it is able to heat over 40 connections on a single XC5.0 battery, anywhere, anytime without the hassle of cords.

The M18 FUEL mud mixer with 180° handle is the industry’s first dedicated cordless solution that delivers the performance and durability to fully replace corded mixers. With the POWERSTATE brushless motor it has the power to mix heavy compounds, such as concrete and mortar. Using our REDLINK Intelligence the variable speed dial, the variable speed trigger and the lock on button combine to give the user ultimate control for a consistent mix and cleaner working environment.

The MILWAUKEE M18 FUEL 1" SDS Plus Rotary Hammer is the next generation of cordless rotary hammers delivering ultimate jobsite performance and productivity. The M18 FUEL 1" SDS Plus Rotary Hammer is the fastest drilling rotary hammer in its class, includes AUTOSTOP Control for enhanced safety, and can drill up to (125) 3/8" x 2" holes per charge when paired with the M18 HIGH OUTPUT XC6.0 Battery. The POWERSTATE Brushless Motor delivers 2 ft lbs of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications.

The Milwaukee M12 3/8" crown stapler delivers a true hand tool replacement. The 2447 is designed to drive a range of 3/8" flat crown staples (1/4" – 9/16 in.) through an array of materials and substrates. At just 3.0 lbs. and 7.5" long the compact design allows for great access into tight spaces and convenient tool belt portability. An easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers.

Optimized for the professional who frequently encounters precision fastening applications, the Milwaukee M12 1/4" hex screwdriver delivers unmatched precision, power and portability along with a slimmer, more ergonomic grip. A variable speed trigger and 0-500 RPM give the user unrivaled fastening control, 15+1 clutch settings prevent over tightening fasteners, and 175 in lbs. of torque provides the ability to accomplish tough applications.

King Scroll Saw Blades will easily handle the precise internal and external cutting of all shapes and applications. These Blades are for use with most standard scroll saws on the market. The universal numbering system will help you quickly cross-reference with blades you are used to using.

King Scroll Saw Blades will easily handle the precise internal and external cutting of all shapes and applications. These Blades are for use with most standard scroll saws on the market. The universal numbering system will help you quickly cross-reference with blades you are used to using.

King Scroll Saw Blades will easily handle the precise internal and external cutting of all shapes and applications. These Blades are for use with most standard scroll saws on the market. The universal numbering system will help you quickly cross-reference with blades you are used to using.

King Scroll Saw Blades will easily handle the precise internal and external cutting of all shapes and applications. These Blades are for use with most standard scroll saws on the market. The universal numbering system will help you quickly cross-reference with blades you are used to using.

Makita's DLX4058M, 18V LXT 4.0AH Li-Ion Cordless 4-Tool Combo Kit is built for the PRO users who demand a wide range of best-in-class cordless solutions.

Makita's DLX4057X1, 18V LXT 3.0AH Li-Ion Cordless 4-Tool Combo Kit is built for the PRO & DIY users who demand a wide range of best-in-class cordless solutions.

A coping saw is a type of hand saw used to cut intricate external shapes and interior cutouts in woodworking or carpentr

A coping saw is a type of hand saw used to cut intricate external shapes and interior cutouts in woodworking or carpentr

This King Canada 1500 watts electric heat gun finds itself used for so many difficult tasks. Tasks range from removing paint from furniture, heat sealing electrical contacts, and removing old labels and caulking to applying vinyl coatings, softening plastics and heating up substrates. With two heat settings at 1000 watts and 1500 watts, you have control over how much heat is being applied to each project. It comes with a great storage case and a number of handy scraping attachments to help you tackle any job. As safety is always a concern, this heat gun is equipped with thermal overload protection to safeguard against overheating.

The Milwaukee 49 94 3005 is a 3" x Carbide abrasive blade intended to be a general purpose blade paired with the Milwaukee M12 fuel 3" Compact cut off tool (2522). Whether it’s drywall, cement backer board, PVC, plastics, etc. this is blade is a unique solution that delivers the capability to cut a wide range of materials quickly and efficiently.

Get this wireless miter saw sliding to facilitate your construction and renovation work.

The 12 in. Double Bevel Sliding Compound Miter Saw has a 15 Amp motor and integrated XPS crosscut positioning system for adjustment-free, accurate cut line indication. Tall sliding fences support 7-1/2 in. of nested crown and 6-3/4 in. of base molding vertically. Exclusive Back Fence Design cuts up to 2x14 dimensional lumber at 90° increased miter capacity of 60° (R) and 50° (L) features durable stainless-steel miter detent plate with cam lock for repeatable accuracy with easy adjustments.

The 60V MAX* 12-inch Sliding Miter Saw features regenerative braking technology for extended battery life. It can make up to 675 cuts on 3 1/4-inch MDF moldings or 255 cuts on pressure-treated 4x4 pine with just one DEWALT FLEXVOLT® DCB609 battery. This saw boasts an efficient transmission and captures up to 94% of dust. The CUTLINE™ system precisely indicates the cutting line. The controls are redesigned for improved ergonomics. The tool alone weighs 50.9 lbs, making it easy to transport on challenging job sites. Includes: 1 battery 001-0106 and a charger.

This compound mitre saw is equipped with a powerful 15A motor delivering up to 5000 RPM, ideal for precise and quick cuts. It offers a bevel range from 3 to 48 degrees, while its mitre capacity adjusts from 0 to 50 degrees both left and right. Its tall sliding fences support vertically positioned crown mouldings up to 4 ½". Designed to meet IEC safety standards, this saw comes with a carbide blade.

This heavy-duty universal stand from King is designed for miter saws with a footprint of no more than 15" depth.

You can use this multi-purpose abrasive saw blade to efficiently cut metal materials.

Get this powerful orbital jigsaw that is equipped with a 5.5 amperes engine.

You can use this multi-purpose abrasive saw blade to efficiently cut metal materials.

You can use this multi-purpose abrasive saw blade to efficiently cut metal materials.

Diablo's diamond Tuck Point blades provide extreme durability, minimal downtime, increased productivity in mortar joint removal. The disc's industrial-grade diamonds with hardened disc body delivers lasting durability and maximizes cutting quality in hardened materials even in extreme applications.

Diablo’s high speed steel jig saw blades are specifically designed for high-performance cutting in thin metal applications. A high speed steel cutting edge and optimized tooth design provide fast cuts and stability in metal from 1/64”-3/64”. T-shank design fits all combo and most U-shank cordless and corded jig saws.