Pipes

P-trap with union is intended for use under sinks where access to the cleanout is available after installation.

P-trap with union is intended for use under sinks where access to the cleanout is available after installation.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

These orange test caps are flexible to easily fit over the end of DWV pipe but hold well enough to allow for pressure testing the DWV system.

Allows you to clean out any blockages downstream from a fitting in the drain line

Allows you to clean out any blockages downstream from a fitting in the drain line

Allows you to clean out any blockages downstream from a fitting in the drain line

A basic P-trap without union or cleanout intended for use where there will be no access to the trap once installed.

A basic P-trap without union or cleanout intended for use where there will be no access to the trap once installed.

A basic P-trap without union or cleanout intended for use where there will be no access to the trap once installed.

Use this ABS DWV adapter to convert solvent weld pipe to a threaded connection ** Please note that this product may not be available individually from your store. **

Use this ABS DWV adapter to convert solvent weld pipe to a threaded connection ** Please note that this product may not be available individually from your store. **

Use this ABS DWV adapter to convert solvent weld pipe to a threaded connection ** Please note that this product may not be available individually from your store. **

An elbow is installed when a change of direction is needed in a vent line. Two 45 degree elbows can be used in place of a 90° elbow if needed.

Use this male ABS DWV adapter to convert solvent weld pipe to a threaded connection ** Please note that this product may not be available individually from your store. **

System 636 PVC flue gas venting system offers regular and increaser Couplings to help meet manufacturers recommended installation practices.

Available in 2" and 3" size to accommodate most residential and light commercial installations. System 636 PVC flue gas vent PVC pipe, fittings, and cement must be used in an installation to ensure code compliance and maintain product warranty.

Use this male ABS DWV adapter to convert solvent weld pipe to a threaded connection ** Please note that this product may not be available individually from your store. **

Vent screens are added to the hub end of elbows used to terminate exhaust and intake pipe runs on the outside wall of a building to keep dirt, debris, and animals out of the venting system.

Use this male ABS DWV adapter to convert solvent weld pipe to a threaded connection ** Please note that this product may not be available individually from your store. **

The Condensate Drain kit is designed to be used with a Tee in the exhaust vent line to drain condensate through 1/2" solid PVC pipe or flexible tubing.

Use this male ABS DWV adapter to convert solvent weld pipe to a threaded connection ** Please note that this product may not be available individually from your store. **

Connects the threaded discharge tube from a dishwasher to the under-sink DWV drain system, typically using a wye fitting in the horizontal drain pipe.

Available in 2" and 3" size to accommodate most residential and light commercial installations. System 636 PVC flue gas vent PVC pipe, fittings, and cement must be used in an installation to ensure code compliance and maintain product warranty.

Connects the threaded discharge tube from a dishwasher to the under-sink DWV drain system, typically using a wye fitting in the horizontal drain pipe.

Connects the threaded discharge tube from a dishwasher to the under-sink DWV drain system, typically using a wye fitting in the horizontal drain pipe.

A backwater valve is a device that prevents sewage in an overloaded main sewer line from backing up into a building basement. The valve will automatically close if sewage backs up from the main sewer and will remain closed until the line is clear.

Vent screens are added to the hub end of elbows used to terminate exhaust and intake pipe runs on the outside wall of a building to keep dirt, debris, and animals out of the venting system.

A backwater valve is a device that prevents sewage in an overloaded main sewer line from backing up into a building basement. The valve will automatically close if sewage backs up from the main sewer and will remain closed until the line is clear.

Most commonly used as part of the exhaust vent pipe to collect condensate and direct it to a drain e.g. using a condensate drain kit.

A backwater valve is a device that prevents sewage in an overloaded main sewer line from backing up into a building basement. The valve will automatically close if sewage backs up from the main sewer and will remain closed until the line is clear.

Most commonly used as part of the exhaust vent pipe to collect condensate and direct it to a drain e.g. using a condensate drain kit.

ABS cellular core pipe is approved for use in the same applications as solid wall ABS pipe but weighs about 25% less.

An elbow is installed when a change of direction is needed in a vent line. Two 45 degree elbows can be used in place of a 90° elbow if needed.

ABS cellular core pipe is approved for use in the same applications as solid wall ABS pipe but weighs about 25% less.

An elbow is installed when a change of direction is needed in a vent line. The 90° elbow is a long-radius elbow to reduce the restriction on airflow in the exhaust or intake line.

ABS cellular core pipe is approved for use in the same applications as solid wall ABS pipe but weighs about 25% less.

An elbow is installed when a change of direction is needed in a vent line. The 90° elbow is a long-radius elbow to reduce the restriction on airflow in the exhaust or intake line.

ABS cellular core pipe is approved for use in the same applications as solid wall ABS pipe but weighs about 25% less.

System 636 PVC flue gas venting system offers regular and increaser Couplings to help meet manufacturers recommended installation practices.

ABS cellular core pipe is approved for use in the same applications as solid wall ABS pipe but weighs about 25% less.

Perforated drainage pipe made of resistant PVC, size 4" X 10' for floors containing ferrous ochre.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.

A 60˚ elbow is a curved fittings used to alter the direction of a pipe run in drainage and vent systems. Solvent weld hubs on both ends.