Fittings

This 3-inch squeeze-in backflow preventer is made from durable brass. Rust and corrosion-resistant, it fits all 3-inch floor drains.

This snap fitting dual thread connector will help you when installing a dishwasher.

Choose this compression straight union for your sink piping.

Purchase this flexible hose adapter when installing your sink plumbing.

Install your dishwasher with the 90º fitting.

Use this adapter to attach the hoses.

Connect the pipes of your sink plumbing with this hose adapter.

Get the anti-siphon vacuum breaker back flow reventor for your hose bibbs.

You will need this three-way diverter if you want to install a shower with an handshower.

Use this adapter to join a threaded pipe to your faucet.

Use these stiffeners with sleeves in your lavatory plumbing.

Use this lead free union corporation to bring together two types of pipes.

Save on full passage with drain thanks to this unleaded valve.

This straight lead-free solder connection has a chrome-plated brass construction and an outlet port for compression fittings.

The unleaded ball valve offers afull port or water, oil or air.

This straight lead-free fitting has a chrome-plated brass construction with an outlet for compression fittings.

For solderless installation on copper pipes, choose the shut-off valve with compression drain.

For solderless installation on copper pipes, choose the shut-off valve with compression drain.

This stop valve solder with waste allows to empty the part of the tap that is not subjected to pressure with the tap with screw ends.

This stop valve solder with waste allows to empty the part of the tap that is not subjected to pressure with the tap with screw ends.

This stop valve solder with waste allows to empty the part of the tap that is not subjected to pressure with the tap with screw ends.

Choose this shut-off valve for water, oil or air, allowing you to drain the side of the tap that is not under pressure when closed.

Choose this shut-off valve for water, oil or air, allowing you to drain the side of the tap that is not under pressure when closed.

Choose this shut-off valve for water, oil or air, allowing you to drain the side of the tap that is not under pressure when closed.

Opt for this 90° elbow when making or repairing a plumbing system.

This soldering stopcock can be used to drive water, oil or air.

This soldering stopcock can be used to drive water, oil or air.

This soldering stopcock can be used to drive water, oil or air.

This lead-free faucet allows you to carry drinking water without contaminating it. The ball is used to allow or prevent flow through the valve depending on its position.

This lead-free faucet allows you to carry drinking water without contaminating it. The ball is used to allow or prevent flow through the valve depending on its position.

This lead-free faucet allows you to carry drinking water without contaminating it. The ball is used to allow or prevent flow through the valve depending on its position.

The 1/2 in ball valve has an integral unleaded passage.

The 1/2 in ball valve has an integral unleaded passage.

The 1/2 in ball valve has an integral unleaded passage.

The lead-free straight fitting has an outlet for compression fittings.

Purchase this lead-free 90° angular elbow to complete your plumbing projects.

Use this lead-free compression connector to complete your plombing projects.

Use this angle adapter to rotate the hose at 90º.

This pressure reducing valve is used in many plumbing installations.

This 3/4" pressure reducing valve is used in many plumbing installations.

Highly resistant, this 1/2" pressure reducing valve allows to reduce the pressure/increase the flow pressure

The ball valve with drain provides a quick connection with full passage.

The ball valve with drain provides a quick connection with full passage.

The ball valve with drain provides a quick connection with full passage.

Install this hose valve on your boiler to easily do its maintenance.

This 1/4" brass barbed wire union allows two hoses to be joined together.

This square-headed 1/4" MPT brass plug is used to seal the end of a circuit.

Obtain a threaded outlet with this quarter turn valve.