Dock accessories

Designed to protect both boats and docks during mooring maneuvers, this dock corner bumper installs easily on most structures. Its 1 1/4" raised profile extends above dock level to provide effective protection for both the top and sides. Made of marine-grade PVC, it won’t mark hulls and is UV resistant. The sturdy mounting flaps ensure a strong hold, while the colour is embedded directly into the vinyl for long-lasting durability without surface transfer.

Made of double-braided nylon, this black dock line provides a firm anchor for boats up to 20 ft. Its 3/8 in diameter offers a comfortable grip, while the 12 in pre-spliced loop makes it easy to secure to bow, stern, or side cleats. Flexible and durable, it remains easy to handle in all conditions. Designed to secure a boat to the dock, it combines strength and suppleness—even after extended exposure to moisture or sunlight.

Designed to securely hold an anchor chain, this tie plate can be installed on the inside or outside of a wooden dock. It accommodates chains up to 1/2" in diameter and allows for easy adjustments during the season. The practical 9/16" x 1" slotted holes, spaced 2 1/2" and 3 1/2" center-to-center, make alignment easier during installation. In addition, its galvanized steel construction ensures consistent mechanical strength, even in environments subject to water level fluctuations.

The Screw-Mount Nylon Dock Cleat offers a compact, durable solution for secure mooring. Measuring 4-1/4-in, this lightweight cleat is built with high-quality nylon to resist corrosion, UV rays and tough marine conditions. Its screw-mount design allows for quick, easy installation on docks, making it ideal for small boats and personal watercraft. Featuring a versatile black finish, this marine cleat provides dependable performance with a modern low-profile look. 

This galvanized steel dock hinge is designed to securely connect two dock sections while allowing for limited movement. Its 1/2" hinge pin and U-shaped structure provide smooth articulation up to 120°, making it ideal for platforms subject to water level variations. Perfectly suited for wooden docks, its galvanized finish offers enhanced corrosion resistance, even in marine or high-humidity environments.

Designed to securely anchor a wooden or aluminum dock, this hot-dip galvanized pile offers excellent corrosion resistance, even in marine environments. With a length of 8 feet and an outer diameter of 1 11/16", it fits most dock structures. Its tubular design allows for deep ground insertion, while the length can be cut to suit specific needs.

This galvanized reinforcement plate is designed to evenly distribute the tension exerted by bolts when installed behind inside corners or dock hinge brackets. Measuring 2 1/2" x 6" with a thickness of 3/16", it provides enhanced structural strength. The 9/16" x 1" slotted holes, spaced 4 1/2" centre to centre, make alignment easier during installation. Compatible with 1/2" x 3" bolts (no. 22276), it’s ideal for dock assemblies subjected to significant mechanical stress.

This complete kit simplifies mooring setup for fixed or floating docks. It includes a 16 ft black dock bumper for easy mounting to wood or aluminum frames, plus two 8" open-base aluminum cleats angled inward at 20° to prevent hull contact. Two double-braided nylon dock lines finish the package. A practical and cohesive set that ensures secure boat docking with streamlined installation.

Made to reinforce cleats on wooden docks, this galvanized corner bracket helps distribute the tension caused by mooring lines more evenly. Its angled design fits discreetly under the dock edge, while providing solid, long-term anchoring. Built from hot-dip galvanized steel, it stands up to water exposure and temperature swings. Use with carriage bolts for a secure hold, even under heavy load.

Perfect for tying off small boats, this 6-inch mooring cleat installs easily on wood or aluminum docks. Made of hot-dip galvanized steel, it offers excellent durability in humid and salt-prone environments. Its traditional shape allows fast, single-handed line tie-offs. The 1.18" spacing between mounting holes provides solid anchoring using 3/8" x 3" bolts or lag screws (not included).

Made from durable nylon, this 6-inch mooring cleat is designed to provide a solid anchor point on docks, pontoons, or boats. Lightweight and corrosion-resistant, it withstands marine conditions without warping. Its double-hole design allows for a strong attachment with two No.12 screws, ensuring a simple and secure installation. Thanks to its functional shape, tying and untying lines is easy—even with thick ropes. Ideal for residential or recreational use in nautical settings.

Designed to securely moor boats, this dock cleat is made of hot-dip galvanized steel, providing excellent resistance to rust and marine environments. Its sturdy design accommodates mooring lines up to 1/2 inch in diameter, while the two mounting points ensure a stable installation. Ideal for residential or commercial docks, it can be reinforced with a dedicated backing plate for larger boats and should be installed using 5/16 in bolts or lag screws (not included).

The heavy-duty D-ring kit includes everything needed to hang a heavy object using D-rings. Anchors will work with the bear claw hanger for added holding power.