Chimneys

Complement the chimney with this isolated "tee".

Complement the chimney with this isolated "tee".

Complement the chimney with this isolated "tee".

Complement the chimney with this isolated "tee".

This chimney cap belongs to the RadonX range, the first PVC piping solution specially designed, tested, and labelled to meet the needs of collecting and evacuating underground gases from under the slab, in order to reduce indoor radon levels. Ideal for low-rise construction, RadonX maximizes system integrity with compatible pipes, fittings, solvent cement, and accessories. Designed and tested as a unique system by IPEX Inc., RadonX components should not be mixed with those from other manufacturers to prevent radon leaks.

The fireplace bellows from the Geronimo collection combines practicality with old-world elegance. Its classic design and robust construction make it a definite aesthetic addition, not to mention its unmatched ability to rekindle the flames of your hearth. Made with high-quality materials, this bellows is both durable and aesthetic, adding a touch of rustic charm.

Entirely made of thermoplastic, this multi-diameter (5 in 1) roof flashing is designed for simplified use. Simply break the seal and remove the excess for pipe vents ranging from 1.25" to 4" in diameter. It is especially suitable for roof pitches from 3.5/12 to 12/12. UV and cold-resistant, it incorporates a water deflector.

Equip the top of your chimney of this galvanized rain cap with fireguard.

Equip the top of your chimney of this galvanized rain cap with fireguard.

Equip the top of your chimney of this galvanized rain cap with fireguard.

Equip the top of your chimney of this galvanized rain cap with fireguard.

Equip the top of your chimney of this galvanized rain cap with fireguard.

Equip the top of your chimney of this galvanized rain cap with fireguard.

Equip the top of your chimney of this galvanized rain cap with fireguard.

Equip the top of your chimney of this galvanized rain cap with fireguard.

Complement the top of your chimney with this universal cap.

Install on wall where flue pipe connects to masonry chimney breech.

Install on wall where flue pipe connects to masonry chimney breech.

Used with rear outlet stoves to direct exhaust upward.

Used with rear outlet stoves to direct exhaust upward.

Used to reduce flue pipe size, crimped on small end.

Used to increase flue pipe size, crimped on big end.

Used to connect two non-crimped ends of pipe together, crimped on both ends.

Used to connect two non-crimped ends of pipe together, crimped on both ends.

Aids in cleaning and inspection.

Closes off one end of an assembled tee.

This corrugated elbow is used to connect two lengths of drain pipe.

This corrugated elbow is used to connect two lengths of drain pipe.

This corrugated elbow is used to connect two lengths of drain pipe.

Used to connect two lengths of flue pipe together, adjustable from 0° to 90°.

Used to connect two lengths of flue pipe together, adjustable from 0° to 90°.

Used to connect two lengths of flue pipe together, adjustable from 0° to 45°.

Used to connect two lengths of flue pipe together, adjustable from 0° to 45°.

Maintain the water-tightness of your roof by installing this high-density thermoplastic flashing.

Maintain the water-tightness of your roof by installing this high-density thermoplastic flashing.

Maintain the water-tightness of your roof by installing this high-density thermoplastic flashing.

Maintain the water-tightness of your roof by installing this high-density thermoplastic flashing.

Maintain the water-tightness of your roof by installing this high-density thermoplastic flashing.

Get a perfectly filtered ventilation with this flexible flashing designed for roofing with a pitch up to 45° (8/12).

Get a perfectly filtered ventilation with this flexible flashing designed for roofing with a pitch up to 45° (8/12).

Get a perfectly filtered ventilation with this flexible flashing designed for roofing with a pitch up to 45° (8/12).

Get a perfectly filtered ventilation with this flashing designed for roofing with a pitch up to 40° (10/12).

Get a perfectly filtered ventilation with this flashing designed for roofing with a pitch up to 40° (10/12).

Get a perfectly filtered ventilation with this flashing designed for roofing with a pitch up to 40° (10/12).

Install this roof flashing for high-rise roof.

Aids in cleaning and inspection.

Used to connect two non-crimped ends of pipe together, crimped on both ends.

Used to connect two lengths of flue pipe together.