Structure and construction hardware

This T-shaped bracket from the Outdoor Accents line is designed to reinforce 4" x 4" wooden outdoor structures. Made from durable steel with a powder-coated finish over ZMAX zinc, it provides excellent protection against corrosion. Ideal for solidifying connections between beams and posts, it is easy to install and suitable for projects such as pergolas, decks, or frames, combining strength and aesthetics.

This decorative Outdoor Accents washer is designed to enhance aesthetics while ensuring increased durability. Its ZMAX zinc coating and powder-coated finish offer enhanced corrosion resistance, making it ideal for outdoor use. Compatible with Simpson Strong-Tie screws and bolts, this washer improves both the appearance and durability of your structures. Practical and robust, it integrates perfectly into outdoor construction or renovation projects.

This hot-dip galvanized interior corner bracket is designed to securely reinforce the angle joints of stationary docks. Its sturdy structure ensures superior stability, preventing deformations caused by loads and environmental conditions. The 7/16" x 3/4" oblong holes allow for easy hardware adjustment, ensuring a precise and durable installation. Compatible with 2x6 or 2x8 beams, it is recommended for use with a carriage bolt set (sold separately). A smart choice to extend the lifespan of your dock safely.

A corner brace designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. Can be mounted in up to six different positions.

A corner brace designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. Can be mounted in up to six different positions.

A corner brace designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. Can be mounted in up to six different positions.

This short corner brace is used for corner strengthening. Ideal for boxes, chests, or any item that requires corner strengthening. Easy to install.

Install 4 in x 4 in or 6 in x 6 in dressed wood posts using a Simpson Strong-Tie post base. With drainage outlets to reduce rot due to water accumulation, the 14-gauge, hot-dip galvanized post base is for lightweight use, such as pergolas and trellises. This steel post base fulfills the requirements of section 9.23.6.2.1 of the National Building Code of Canada.

Allows for the connection of a 4 x 4" beam to a 4 x 4" posté Double-shear nailing between beam and post gives added strength. The BC series offers dual purpose post cap/base for light cap or base connections.

The Simpson Strong-Tie's HBC is a post-installed saddle that offers installation flexibility and strength for connecting to dressed wood posts. This post base is ideal for light connections such as patio covers, deck trellises and pergolas. With a hot-dipped galvanized finish, the HBC provides additional corrosion protection for outdoor projects. Chamfered corners create a sleeker-looking product, while steel embossments provide added strength. Drainage outlets help reduce the possibility of water accumulation that can potentially rot the post. Install with (6) 0.162-in x 3.5-in nails in the beam and (4) 0.162-in x 3.5-in nails in the base bottom.

This LSC stringer connector is ideal for creating a versatile concealed connection between the stringer and the rim joist or the carrying beam, instead of costly framing. Its adjustable field slope ensures compatibility with all common stairways, thanks to its LSC connector suitable for solid or notched stringers. It replaces toe-nailing or additional framing and is therefore suitable for most installations on 2x10 or 2x12 beam/rim joist. It can be installed flush with the top of the supporting member (2x10 or 2x12 rim joist/beam) or lower on the face (2x12 rim joist). Interchangeable for left or right applications, it features a ZMAX corrosion-resistant coating. Suitable for indoor and some outdoor applications.

Used to reinforce 90° angles with a miter joint by installing it on the angle's side. For when additional support is required. Its black powdered coat finish provides weather resistance.

Used for reinforcing 90° angles by mounting on the inside or outside of the corner

This corner brace is designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. For use on indoor and outdoor applications.

This corner brace is the perfect solution for when additional support is required. For use on indoor and outdoor applications. Easy to install.

This corner brace is the perfect solution for when additional support is required. For use on indoor and outdoor applications. Easy to install and slightly adjustable when mounted.

This corner brace is designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. For use on indoor and outdoor applications.

Ideal for attaching, connecting, aligning, and splicing materials. Chamfered corners provide a decorative look. Its black powdered coat finish provides weather resistance.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

This corner plate is used to reinforce 90° angles by installing it on the side of the angle. Its black powdered coat allows for weather resistance. The ideal solution for when additional support is required.

This corner brace is designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. For use on indoor and outdoor applications.

Used to support a load at a 45° angle by attaching to the inside of a 90° angle

Used to support a load at a 45° angle by attaching to the inside of a 90° angle

Used to support a load at a 45° angle by attaching to the inside of a 90° angle

Ideal for reinforcing two miter joint pieces that create a 90° angle. This 45° hole pattern for nails provides an easy installation option. Its black powdered coat finish provides weather resistance.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

This multi-position corner brace is designed to strengthen corners. Can be used on boxes, chests, or any other item requiring corner strengthening. Easy to install and built to last.

Ideal for attaching, connecting, aligning, and splicing materials. Chamfered corners provide a decorative look. Its black powdered coat finish provides weather resistance.

This corner brace is the perfect solution for when additional support is required. For use on indoor and outdoor applications. Easy to install and can be mounted in four different positions.

This corner brace is the perfect solution for when additional support is required. For use on indoor and outdoor applications. Easy to install and can be mounted in four different positions.

This corner brace is the perfect solution for when additional support is required. For use on indoor and outdoor applications. Easy to install and can be mounted in four different positions.

This corner brace is the perfect solution for when additional support is required. For use on indoor and outdoor applications. Easy to install and can be mounted in four different positions.

This corner brace is the perfect solution for when additional support is required. For use on indoor and outdoor applications. Easy to install and can be mounted in four different positions.

Used to strengthen a 90° angle by flat attachment to the side at a 45° angle

Used to strengthen a 90° angle by flat attachment to the side at a 45° angle

Used to strengthen a 90° angle by flat attachment to the side at a 45° angle

A corner brace designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. Can be mounted in up to six different positions.

A corner brace designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. Can be mounted in up to six different positions.

A corner brace designed to reinforce joints, seams, and cracks. Heavy-duty and built to last. Can be mounted in up to six different positions.

When additional support is required. For use on indoor and outdoor applications. Countersunk screw holes allow screws to be flush with material for a sleeker look.

When additional support is required. For use on indoor and outdoor applications. Countersunk screw holes allow screws to be flush with material for a sleeker look.

When additional support is required. For use on indoor and outdoor applications. Countersunk screw holes allow screws to be flush with material for a sleeker look.