Machine screws

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Imperial screw with zinc plating

Fasten machine components, appliances, electrical boxes, handles, knobs, and more with these metric machine screws.

Fasten machine components, appliances, electrical boxes, handles, knobs, and more with these metric machine screws.

Fasten machine components, appliances, electrical boxes, handles, knobs, and more with these metric machine screws.

Fasten machine components, appliances, electrical boxes, handles, knobs, and more with these metric machine screws.

These 10-32 by 3/4 inch zinc plated machine screws make fastening tasks easier with their Quadrex drive that accepts both Phillips and Robertson bits. Pan head design sits flush for a clean finish while the type B point threads smoothly into pre-tapped holes. Built to ASME B18.6.3 standards so you can count on consistent fit every time.

These 1/4" x 1/2" flat thumb screws feature a vertical flat head designed for tool-free tightening and loosening by hand. The knurled edge provides secure grip for quick adjustments. Constructed from durable steel, these fasteners deliver reliable holding power in applications requiring frequent access. Ideal for jigs, fixtures, electronics enclosures, and any assembly needing regular manual adjustment.

These 8-32 x 1/2" flat thumb screws feature a low-profile vertical head designed for tool-free tightening and loosening. The flat head sits flush with surfaces for a clean finish. Ideal for electronics enclosures, access panels, and fixtures requiring frequent manual adjustments.

These 6-32 x 1/2" flat thumb screws feature a vertical flat head designed for hand tightening without tools. The coarse 32 TPI thread provides secure grip in standard #6 threaded holes. Machined flat head offers a low-profile finish when installed. These fasteners are suited for electronics enclosures, access panels, and equipment requiring frequent adjustments.

These flat thumb screws in 10-24 thread by 1/2 inch length make your projects easier with tool-free fastening. Simply tighten or loosen by hand whenever you need quick adjustments. The flat knurled head provides a comfortable grip for repeated use. Perfect for jigs, fixtures, electronics enclosures, or any application where you need convenient access. For multiple projects.

Zinc-plated machine screw measuring 2 inches in length with 8-32 thread pitch. Flat head configuration with Quadrex drive recess. Type B point geometry. Steel construction with zinc electroplating. Manufactured in compliance with ASME B18.6.3 specifications per Industrial Fasteners Institute requirements. Packaged in quantities of 100 units per box.

This 1/4" x 2 1/2" machine screw is made from 18-8 stainless steel for corrosion resistance in demanding environments. The flat Phillips head allows flush or countersunk installation. Designed with imperial threading and a Type B point for use in pre-tapped holes. Compliant with ASME B18.6.3 standards. Suitable for securing mechanical components, electrical boxes, handles, and appliances. Pack of 2.

M8 x 16 mm zinc-plated machine screw with pan head and Phillips drive. Features type B point for reliable threading into pre-tapped holes. Manufactured to ASME B18.6.3 standards for consistent quality and dimensional accuracy. Metric threading ensures compatibility with standard M8 hardware. Suitable for mechanical assemblies, electrical enclosures, and general fastening applications requiring corrosion resistance.

M6 x 50 mm zinc-plated steel machine screw with pan head and Phillips drive. Metric thread with Type B point for use in pre-tapped holes. The pan head design provides excellent grip and torque during installation. Complies with ASME B18.6.3 standards. Suitable for fastening machine components, electrical boxes, handles, and appliances.

This M6 x 45 mm pan head machine screw is made from zinc-plated steel for corrosion resistance and long-lasting performance. It features a Phillips drive for secure fastening and a metric thread with Type B point for use in pre-tapped holes. Meets ASME B18.6.3 standards. Suitable for securing mechanical components, electrical boxes, handles, and appliances.

M6 x 40 mm machine screws in zinc-plated steel with pan head and Phillips drive. Metric thread with Type B point for pre-tapped holes. Meets ASME B18.6.3 standards. Suitable for fastening machine components, electrical boxes, appliances, handles, and knobs in residential or commercial applications.

M6 x 35 mm pan head machine screw in zinc-plated steel with Phillips drive. Designed for pre-tapped holes with metric threading and Type B point. Ideal for securing machine components, electrical boxes, handles, and appliances. Meets ASME B18.6.3 standards for reliable fastening in mechanical and electrical applications.

M6 x 30 mm pan head machine screws in zinc-plated steel, sold in a 3-pack. Designed for pre-tapped holes with metric threading and Type B point. The Phillips drive head provides reliable torque and secure fastening for electrical boxes, appliances, handles, and mechanical components. Compliant with ASME B18.6.3 standards from the Industrial Fasteners Institute.

M6 x 25 mm machine screw with Phillips pan head drive in zinc-plated steel. Designed for pre-tapped holes with metric threading and Type B point. The pan head provides solid grip and consistent torque for electrical boxes, appliances, handles, and mechanical components. Meets ASME B18.6.3 standards.

M6 x 16 mm zinc-plated steel machine screws with pan head and Phillips drive, sold in a pack of 3. Metric thread with Type B point for use in pre-tapped holes. Ideal for securing appliances, electrical boxes, handles, and mechanical components. Compliant with ASME B18.6.3 standards for reliable fastening in residential and commercial applications.

This M6 x 12 mm machine screw measures 12 mm in length with a 6 mm diameter thread. Constructed from zinc-plated steel, it features a pan head with Phillips drive for secure fastening and reliable torque. The metric threading and Type B point allow use in pre-tapped holes. Complies with ASME B18.6.3 standards. Suitable for mechanical assemblies, electrical boxes, handles, and appliance components.

M6 x 10 mm pan head machine screws in zinc-plated steel. Designed for pre-tapped holes, these metric screws feature a Type B point and Phillips drive for secure fastening. Suitable for mechanical components, electrical boxes, handles, and knobs. Compliant with ASME B18.6.3 standards. The pan head profile provides reliable grip and consistent torque during installation.

M3 x 8 mm zinc-plated machine screw with pan head and Phillips drive. Features a type B point for thread-forming in pre-tapped holes. Manufactured to ASME B18.6.3 standards for consistent thread engagement and dimensional accuracy. Metric threading suits precision assemblies in electronics, machinery, and light fixtures.

This M3 x 16 mm machine screw features a pan head design with Phillips drive for reliable fastening. Zinc-plated finish provides corrosion resistance for indoor applications. Type B point allows threading into pre-drilled holes without pre-tapping. Manufactured to ASME B18.6.3 standards for consistent quality and dimensional accuracy. Metric threading ensures compatibility with M3 nuts and tapped holes.

This 6-32 x 1 1/2" stainless steel machine screw features a pan head and type B point for secure fastening in pre-tapped holes. Manufactured to ASME B18.6.3 standards for consistent thread pitch and dimensional accuracy. The corrosion-resistant stainless steel construction suits both indoor and outdoor applications. Ideal for electrical enclosures, appliances, and equipment assembly.

Zinc plated machine screw measuring 1/4" diameter by 4" length with 1/4-20 threading. Features pan head design with Quadrex drive for improved torque transfer and reduced cam-out. Type B point ensures reliable thread engagement in pre-tapped holes. Meets ASME B18.6.3 industrial standards for dimensional accuracy and performance. For professional fastening applications in metal assemblies and machinery.

This 6-32 x 3/4 inch flat head machine screw is made from 18-8 stainless steel for lasting corrosion resistance. The Phillips drive and countersunk head allow flush installation in pre-tapped holes. Featuring imperial threading and a Type B point, these screws meet ASME B18.6.3 standards. Suitable for electrical boxes, appliances, handles, and mechanical assemblies.

This 6-32 x 1" machine screw is made from 18-8 stainless steel for superior corrosion resistance. The flat Phillips head allows flush or countersunk installation in pre-tapped holes. Featuring imperial threading and a Type B point, it meets ASME B18.6.3 standards. Suitable for securing appliances, electrical boxes, handles, and mechanical components.

This 6-32 x 1/2 inch flat head machine screw is made from 18-8 stainless steel for corrosion resistance in demanding environments. The Phillips drive allows secure fastening while the flat head provides flush installation in countersunk holes. Featuring imperial threading and a Type B point for use in pre-tapped holes, this screw meets ASME B18.6.3 standards. Suitable for electrical boxes, appliances, handles, and mechanical assemblies.

This 6-32 x 1 1/2" machine screw is made from 18-8 stainless steel for corrosion resistance in demanding environments. The flat head design allows flush or countersunk installation, while the Phillips drive ensures secure fastening with standard tools. Featuring imperial threading and a Type B point for pre-tapped holes, this fastener meets ASME B18.6.3 standards. Ideal for securing electrical boxes, appliances, handles, and mechanical components.

These 1/4-20 x 2" machine screws feature a flat countersunk head that sits flush and a Quadrex (Phillips/Square) drive for secure engagement. The zinc-plated silver finish and full-length 1/4-20 threads support clean, consistent assembly. A Type B blunt tip and ASME B18.6.3 compliance provide dimensional consistency you can rely on. They are practical to store and transport for professional and DIY projects requiring a PH/SQ recess and a flush finish.

These 1/4" x 1-1/2" machine screws are made for hardware and metal-part assembly. A flat countersunk head seats flush in countersunk holes, and the Quadrex recess accepts both cross and square drivers. Full-length 1/4-20 machine threads pair with a Type B point and a blunt end to support consistent fastening in tapped holes or with nuts. The bright zinc-plated finish provides a clean, silvery look. They meet ASME B18.6.3 requirements for dimensional consistency and fit.

This 8-32 x 1 1/4" zinc-plated machine screw features a flat head with Quadrex drive for improved torque transfer and reduced cam-out. The type B point allows for thread-forming in thin metals without pre-tapping. Manufactured to ASME B18.6.3 standards, these fasteners deliver consistent threading and reliable performance for electrical, HVAC, and general assembly applications.

Designed for assembly, maintenance, and repairs, this 8-32 x 1" machine screw delivers reliable fastening in pre-tapped components. The flat head with a beveled rim sits flush, and the Quadrex drive (Phillips/square) provides versatile tool engagement. A type B point with a blunt end aids clean starts in matching holes. Fine machine threads extend close to the head for consistent grip. The zinc-plated silver finish offers a neat look. Supplied as a 100-pack in a clear plastic box, it meets ASME B18.6.3 and fits 8-32 tapped holes and matching nuts.

Machine screw measuring 8-32 x 3/4 inch with flat head and Quadrex drive. Zinc-plated steel construction provides corrosion resistance for indoor applications. Type B point allows direct installation into pre-tapped holes. Meets ASME B18.6.3 standards for dimensional accuracy. Sold in a 100-piece pack for electrical boxes, mechanical assemblies, and general fastening tasks requiring consistent thread engagement.

These 6-32 x 2.5" machine screws deliver precise fastening with a Quadrex recess that accepts both cross and square bits for firm engagement. The flat, countersunk head installs flush, while a beveled underhead seats cleanly in countersunk holes. Uniform machine threads extend nearly the full length for consistent hold, and a Type B point provides a blunt tip. The zinc-plated finish offers a smooth, bright silver look. Made to ASME B18.6.3 for dimensional consistency.