Cement Screws

This steel base is designed to securely fix a square post with fresh concrete. It provides a reliable and efficient solution to support your fence.

These 3/16" x 4" concrete screws feature a hexagonal head with integrated washer and Gold Seal corrosion-resistant coating. The oversized shank reduces head breakage while the diamond tip displaces debris for reliable anchoring. Aggressive scorpion tail threading minimizes drive torque and delivers exceptional shear and pull-out resistance. Designed for fastening to concrete, block, and brick in structural and general construction applications.

This 3/16" x 3 1/4" concrete screw features a hexagonal head with integrated washer and Gold Seal corrosion-resistant coating. The oversized shank reduces head breakage while the diamond point and aggressive scorpion tail thread deliver high pull-out resistance and exceptional shear strength. Designed for masonry anchoring in concrete and block, this fastener minimizes drive-in torque for faster installation.

These 3/16" x 2 3/4" concrete screws feature a hexagonal head with integrated washer and Gold Seal corrosion-resistant coating. The enlarged shaft diameter reduces head breakage during installation while the diamond point and aggressive scorpion thread design minimize drive-in torque requirements. Engineered for high pull-out resistance and exceptional shear strength in concrete and masonry applications.

These 3/16" x 2 1/4" hex head concrete screws feature Gold Seal corrosion-resistant coating and an integrated washer for secure fastening. The oversized shank reduces head breakage while the diamond tip and aggressive scorpion tail thread design minimize drive torque and maximize pull-out resistance. Engineered for concrete, block, and masonry applications where dependable fastening and job site efficiency matter most.

These 3/16" x 1 3/4" hex head concrete screws feature Gold Seal coating for corrosion resistance. The reinforced shank reduces head snap-off while the diamond point and aggressive scorpion thread design lower drive-in torque requirements. Integrated washer ensures consistent seating depth. Engineered for high pull-out and shear strength in concrete and masonry anchoring applications.

These 3/16" x 1 1/4" concrete screws feature a hexagonal head with integrated washer and Gold Seal corrosion-resistant coating. The oversized shank reduces head breakage while the diamond-tipped point and aggressive scorpion tail thread design lower drive-in torque requirements. Engineered for superior pull-out resistance and exceptional shear strength in masonry, concrete, and block applications.

These 1/4" x 6" concrete screws feature a hexagonal head with integrated washer and Gold Seal corrosion-resistant coating. The aggressive scorpion tail thread reduces drive-in torque while delivering exceptional pull-out and shear resistance. A diamond-tipped point displaces debris for reliable anchoring in concrete, block, and masonry. The oversized shank minimizes head snapping under load.

These 1/4" x 6" concrete screws feature Gold Seal corrosion-resistant coating and hexagonal washer heads for secure fastening. The aggressive scorpion tail thread reduces drive-in torque while providing exceptional pull-out and shear resistance. Diamond point design displaces debris for reliable anchoring in concrete, block, and masonry applications.

This 1/4" x 6" hex head concrete screw features Gold Seal corrosion-resistant coating and an integrated washer for secure fastening. The reinforced shank reduces head breakage while the diamond point and aggressive scorpion tail thread design lower drive torque requirements. Engineered for high pull-out resistance and exceptional shear strength, these screws fasten directly into concrete, block, and brick without anchors. For framing, electrical, and mechanical mounting applications.

This 1/4" x 5" concrete screw features Gold Seal corrosion-resistant coating with an integrated hex washer head for direct wrench installation. The reinforced shank reduces head breakage while the diamond tip displaces debris for consistent anchoring. Aggressive scorpion tail threading lowers drive torque and delivers exceptional pullout and shear resistance. For structural fastening in concrete and masonry applications.

These 1/4" x 4" concrete screws feature Gold Seal corrosion-resistant coating and hexagonal washer heads for secure fastening in masonry and concrete. The reinforced shank reduces head breakage while the diamond point displaces debris for reliable anchoring. Aggressive scorpion tail threading minimizes drive torque and maximizes pull-out and shear resistance. Suited for structural and general concrete fastening applications.

These 1/4" x 3 1/4" concrete screws feature a hexagonal head with integrated washer and Gold Seal corrosion-resistant coating. The aggressive scorpion tail thread reduces drive-in torque while the diamond point and oversized body minimize head snapping. Designed for anchoring into concrete, block, and brick, these screws deliver exceptional shear strength and high pull-out resistance for structural and general fastening applications.

This 1/4" x 2 3/4" hex head concrete screw features Gold Seal coating for corrosion resistance and a reinforced body that reduces head breakage. The aggressive scorpion tail thread minimizes drive-in torque while the diamond point displaces debris for consistent anchoring in concrete and masonry. Designed for structural fastening with exceptional shear and pull-out values.

These 1/4" x 2 1/4" concrete screws feature a hexagonal head with integrated washer for secure fastening in masonry applications. The Gold Seal coating provides corrosion resistance while the larger shank diameter reduces head breakage during installation. Scorpion tail threading lowers drive torque requirements and the diamond point displaces debris for reliable anchoring. Designed for structural concrete and block attachments in residential and commercial construction.

These 1/4" x 1 3/4" concrete screws feature a hexagonal head with integrated washer and Gold Seal corrosion-resistant coating. The aggressive scorpion tail thread reduces drive-in torque while providing exceptional pull-out and shear resistance. A diamond-point tip displaces debris for reliable anchoring in concrete and masonry. The reinforced shank minimizes head breakage during installation. For framing, electrical, and mechanical fastening applications.

These 1/4" x 1 1/4" concrete screws feature a hexagonal head with integrated washer and Gold Seal corrosion-resistant coating. The oversized shank reduces head breakage while the diamond point and aggressive scorpion tail thread design minimize drive torque and maximize pull-out and shear resistance. For concrete and masonry fastening applications.

The Strong-Bolt 2 wedge anchor is designed to deliver consistent performance in both cracked and uncracked concrete structures. With ICC-ES Category 1 certification, it ensures excellent holding power under static and seismic loads. It provides a secure and lasting hold, even in the most demanding conditions. Compliant with IBC 2015 and ACI 318 standards for post-installed anchors.

The Strong-Bolt 2 wedge anchor is designed to ensure consistent performance in cracked or uncracked concrete structures. With ICC-ES Category 1 classification, it delivers proven resistance to static and seismic loads. It provides a secure and lasting hold. Compliant with IBC 2015 and ACI 318, it is perfectly suited for post-installed anchors.

Ideal for structural applications in both cracked and uncracked concrete, the Strong-Bolt 2 wedge anchor combines strength and high reliability. Classified ICC-ES Category 1, it offers excellent resistance to static and seismic loads. Its secure and lasting hold adapts to the most demanding environments. Compliant with IBC 2015 and ACI 318 standards.

The Strong-Bolt 2 wedge anchor excels in cracked and uncracked concrete, even in challenging structural environments. Its ICC-ES Category 1 certification reflects high-level performance under static and seismic loads. It provides a secure and lasting hold. Meeting IBC 2015 and ACI 318 standards, it is ideal for post-installed anchors.

For complex structural projects, the Strong-Bolt 2 wedge anchor delivers superior performance in both cracked and uncracked concrete. Certified ICC-ES Category 1, it stands out for its resistance to static and seismic loads. It ensures a secure and lasting hold, even under extreme conditions. Compliant with IBC 2015 and ACI 318 standards, it is suitable for post-installed anchors.

Built to withstand demanding structural applications, the Strong-Bolt 2 wedge anchor is suitable for both cracked and uncracked concrete. Its ICC-ES Category 1 certification confirms its strength under static loads and seismic conditions. It delivers a secure and lasting hold, even in the toughest environments, and complies with IBC 2015 and ACI 318 standards for post-installed anchors.

The Strong-Bolt 2 wedge anchor is designed to provide a dependable solution in cracked or uncracked concrete structures. With ICC-ES Category 1 classification, it guarantees high performance under static and seismic loads. Its secure and lasting hold makes it a great choice for challenging environments. It complies with IBC 2015 and ACI 318 standards for post-installed anchors.

Performing reliably in both cracked and uncracked concrete, the Strong-Bolt 2 wedge anchor meets the strict demands of structural applications. Certified ICC-ES Category 1, it ensures dependable resistance to static and seismic loads. Its secure and lasting hold adapts to extreme environments. It complies with IBC 2015 and ACI 318 standards for post-installed anchors.

Designed for the most demanding job sites, the Strong-Bolt 2 wedge anchor is compatible with both cracked and uncracked concrete. It holds an ICC-ES Category 1 classification for exceptional performance under static and seismic loads. Providing a secure and lasting hold, it meets expectations in tough conditions. It complies with IBC 2015 and ACI 318 standards for post-installed anchors.

The Strong-Bolt 2 wedge anchor is ideal for complex structural applications in both cracked and uncracked concrete. Certified ICC-ES Category 1, it delivers high-level performance under static and seismic loads. Its secure and lasting hold ensures reliable anchoring even in demanding conditions. It complies with IBC 2015 and ACI 318 standards for post-installed anchors.

Robust and high-performing, the Strong-Bolt 2 wedge anchor is built for structural applications in both cracked and uncracked concrete. Thanks to its ICC-ES Category 1 classification, it provides maximum resistance under static and seismic loads. It guarantees a secure and lasting hold, even in extreme environments. It meets IBC 2015 and ACI 318 standards for post-installed anchors.

The Strong-Bolt 2 wedge anchor stands out in complex structural applications, whether used in cracked or uncracked concrete. With an ICC-ES Category 1 classification, it offers excellent performance under static loads and seismic forces. It delivers a secure and lasting hold, even in challenging conditions. It meets IBC 2015 and ACI 318 standards for post-installed anchors.

Engineered for structures under high stress, the Strong-Bolt 2 wedge anchor performs reliably in cracked and uncracked concrete alike. Its ICC-ES Category 1 classification reflects outstanding performance under static and seismic conditions. It ensures a secure and lasting hold. Compliant with IBC 2015 and ACI 318, it meets the requirements for post-installed anchors.

Designed for complex structural environments, the Strong-Bolt 2 wedge anchor performs exceptionally in both cracked and uncracked concrete. Its ICC-ES Category 1 certification confirms its ability to withstand static and seismic loads. It provides a secure and lasting hold under the most demanding conditions. Compliant with IBC 2015 and ACI 318, it is suitable for post-installed anchors.

The Strong-Bolt 2 wedge anchor is designed to meet the high demands of structural applications in both cracked and uncracked concrete. Classified as ICC-ES Category 1, it delivers proven performance under static and seismic loads. Its secure and lasting hold makes it ideal for tough environments. It is listed under IBC 2015 and ACI 318 standards for post-installed anchors.

Ideal for both cracked and uncracked concrete, the Strong-Bolt 2 wedge anchor is built for the most rigorous structural applications. Its ICC-ES Category 1 certification confirms optimal performance under static and seismic loads. Providing a secure and lasting hold in the most demanding environments, it meets IBC 2015 and ACI 318 requirements and is suited for post-installed anchors in concrete.

The Strong-Bolt 2 wedge anchor is designed to excel in demanding structural applications, whether in cracked or uncracked concrete. With an ICC-ES Category 1 classification, it delivers maximum performance under static and seismic loads. Solid and dependable, it ensures a secure and lasting hold in extreme conditions. Listed under IBC 2015 and ACI 318, it meets all requirements for post-installed anchors.

Engineered for the most demanding structural applications, the Strong-Bolt 2 wedge anchor delivers optimal performance in both cracked and uncracked concrete. Its ICC-ES Category 1 classification reflects superior resistance under static and seismic loads. It ensures a secure and lasting hold, even in the harshest environments. Compliant with IBC 2015 and ACI 318 standards, it’s ideal for post-installed anchors in concrete.

Designed to deliver optimal performance in the most demanding structural applications, the Strong-Bolt 2 wedge anchor is perfectly suited for both cracked and uncracked concrete. Classified as ICC-ES Category 1—the highest level of performance under static and seismic loads—it ensures secure and lasting anchorage even in the most severe conditions. Listed under IBC 2015 and ACI 318 design requirements for post-installed anchors, it meets resistance design standards for both cracked and uncracked concrete.

The Concrete Screw Hex Head is built for stability and strength across tough anchoring jobs. With a durable design tailored to masonry and concrete, it provides a dependable fastening option in both residential and commercial projects. These screws deliver consistent performance and dependable hold without the risk of slippage or surface damage. Built for long-term use in demanding environments, they’re a reliable choice for professionals and DIYers who need secure, hassle-free fastening.

These flat head Concrete Screws offer strong, consistent performance in demanding fastening applications. Designed for reliability and ease of use, they secure materials to concrete surfaces without slipping or stripping. Ideal for use in construction, renovations, or general repairs, these screws support confident, long-lasting installations. Whether used indoors or out, this 10-pack of contractor-grade screws delivers a strong, lasting hold in tough materials.

The CobraTap™ concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high grade steel to ensure the best torque and maximum holding power and is coated with the corrosion resistant Cobra Coat™.

The CobraTap™ concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high grade steel to ensure the best torque and maximum holding power and is coated with the corrosion resistant Cobra Coat™.

The CobraTap™ concrete screws are designed with a high and low thread to cut the concrete more effectively, and to keep its alignment. It is made of tempered, high grade steel to ensure the best torque and maximum holding power, and is coated with the corrosion resistant Cobra Coat™.

The CobraTap™ concrete screws are designed with a high and low thread to cut the concrete more effectively, and to keep its alignment. It is made of tempered, high grade steel to ensure the best torque and maximum holding power, and is coated with the corrosion resistant Cobra Coat™.

The CobraTap™ concrete screws are designed with a high and low thread to cut the concrete more effectively, and to keep its alignment. It is made of tempered, high grade steel to ensure the best torque and maximum holding power, and is coated with the corrosion resistant Cobra Coat™.

The CobraTap™ concrete screws are designed with a high and low thread to cut the concrete more effectively, and to keep its alignment. It is made of tempered, high grade steel to ensure the best torque and maximum holding power, and is coated with the corrosion resistant Cobra Coat™.

The CobraTap™ concrete screws are designed with a high and low thread to cut the concrete more effectively, and to keep its alignment. It is made of tempered, high grade steel to ensure the best torque and maximum holding power, and is coated with the corrosion resistant Cobra Coat™.

The CobraTap™ concrete screws are designed with a high and low thread to cut the concrete more effectively, and to keep its alignment. It is made of tempered, high grade steel to ensure the best torque and maximum holding power, and is coated with the corrosion resistant Cobra Coat™.

Fix any material in the concrete with these solid screws.

Fix any material in the concrete with these solid screws.