Screws and anchors

Ex EDGE CLIP fasteners simplify the installation of grooved wood, composite, and PVC decking boards. They fit securely into the groove before being fastened with the included T15 bit, allowing for accurate placement in a single pass. The NEVER-MISS guide ensures straight, consistent alignment. For added comfort, consider installing while standing using the CAMO DRIVE or ClipDRIVE tools. Thanks to the T-15 StarDrive bit, pull-through risk is reduced, delivering a clean, reliable result. For best performance, use a standard drill; impact drivers may damage the clips.

Perfect for installing grooved decking boards in wood, composite, or PVC, Ex EDGE CLIP fasteners offer a quick, precise, and long-lasting hold. With the included T15 bit, each fastener is installed in one smooth motion after being inserted into the board’s groove. The NEVER-MISS guide ensures straight, even alignment. For a more ergonomic, stand-up installation, use CAMO DRIVE or ClipDRIVE tools. The StarDrive T-15 design limits pull-through risks and provides a clean, professional finish. To maintain clip integrity, a standard drill is preferred—impact drivers should be avoided.

Ex EDGE CLIP fasteners ensure quick and secure installation of grooved decking boards made from wood, composite, or PVC. They clip firmly into the groove before being fastened using the included T15 bit, ensuring precise placement from the very first pass. The NEVER-MISS guide helps maintain perfect alignment for each clip. For added comfort, install while standing using CAMO DRIVE or ClipDRIVE tools. The T-15 StarDrive system reduces the risk of pull-through for a flawless finish. A standard drill is recommended—avoid using impact drivers, which could damage the fasteners.

This steel socket set screw secures rotating components by threading through the outer part to contact and lock against the inner component. The hex socket head allows precise torque application with an Allen key. Commonly used to prevent slippage between pulleys and shafts, motor couplings, and other mechanical assemblies where rotational movement must be controlled.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

Tackle a variety of fastening projects in softwood and engineered wood with these wood screws.

These stainless steel finishing nails are made to fasten decorative elements without leaving visible marks. Used with compatible nailers, they penetrate delicate materials smoothly without chipping. Thanks to their corrosion resistance, they’re suitable for damp spaces or covered outdoor use. Packaged neatly in boxes, they’re ready for a range of residential or professional tasks.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Get a 18-8 type-A square drive with this pan head screw.

Whether it's for Christmas, Easter, Halloween, marking a new season, or a special celebration, there are plenty of occasions to hang a wreath. This set of three metal door hooks in assorted colours of red, black, and green will allow you to securely hang a wreath. Their hook design ensures a firm hold and solid support, while their simple construction guarantees a lifetime of use.

Offering a complete solution for fine finish work, this multipack includes five nail lengths: 1/2", 5/8", 3/4", 1", and 1 3/16". Made of electro-galvanized steel, they resist rust in dry or lightly humid settings. Their fine gauge and headless design allow for discreet fastening—ideal for moulding, trim, or fine woodworking. Compatible with 23-gauge pin nailers, they’re perfect for both pros and seasoned DIYers.

Perfect for detailed finishing jobs, these headless nails drive into wood cleanly without cracking or leaving visible marks. Their slim profile suits precision tasks like frames, cornices, or fine joinery. The electro-galvanized finish adds corrosion resistance for use in dry to mildly humid areas. Compatible with many nailer models, they come boxed and ready for both home and professional use.

These headless finishing nails are designed for projects where discretion matters. Ideal for cabinetry and delicate trim work, they provide a clean hold with virtually no surface marks. Their electro-galvanized coating protects against rust in low-humidity environments. Easy to load into compatible nailers, they come boxed for recurring use in the shop or on-site.

Perfect for subtle finishing applications, these headless nails penetrate wood without leaving visible marks. Their slim gauge suits detailed work like moulding installation, cabinetry, or decorative framing. Electro-galvanized for corrosion resistance, they perform well in dry or lightly exposed conditions. Compatible with the appropriate nailers and boxed for convenience, they’re suited to both professionals and dedicated DIY users.

Designed for delicate finishing, these headless nails blend into wood surfaces for a clean, mark-free appearance. Their fine size is ideal for precision tasks like cabinetry, moulding, or trim work. The electro-galvanized coating helps resist rust in dry or low-exposure settings. Easy to load into compatible nailers, they come boxed for frequent residential or commercial use.

Compatible with fine-gauge nailers, these stainless steel finishing nails secure mouldings, panels, or trims with a clean, professional finish. Their slim profile helps prevent surface damage during insertion. Designed to resist rust, they’re a solid choice for both indoor projects and protected outdoor settings. Packaged in convenient quantities for both pros and advanced DIYers.

Perfect for precise attachment of mouldings or panelling, these stainless steel finishing nails deliver clean entry without damaging the surface. They work with most nailers and are easy to use for small carpentry jobs. Rust-resistant, they’re also appropriate for areas prone to humidity. Supplied in boxes, they meet the needs of pros and detail-minded hobbyists alike.

Ideal for trim projects, these stainless steel nails work with compatible nailers to attach mouldings, decorative trim, or framing pieces with precision. Their slim design prevents material from cracking and provides strong holding power. Moisture-resistant by nature, they’re well-suited for indoor areas or covered outdoor spaces.

Perfect for finishing work, these stainless steel brad nails are designed for use with compatible nailers to discreetly secure mouldings, trim, or panels. Their fine gauge allows for clean insertion without splitting the material, while offering reliable holding strength. Naturally resistant to corrosion, they’re suitable for both indoor use and sheltered outdoor applications. Packed in boxes, they’re a great choice for both pros and demanding DIYers.

Built for structural work, these 21° stick nails measure 5 1/8" long with a .148" diameter. Their smooth, bright finish allows for clean penetration with reduced wood splitting, while providing solid holding power. Perfect for framing, walls, or heavy-duty assembly. Designed for plastic-collated angled nailers, they’re packaged in bulk to meet the demands of residential or commercial jobs.

This screw is designed to join composite and wood.

This screw is designed to join composite and wood.

This screw is designed to join composite and wood.

Socket head cap screw measuring 3/8 inch diameter by 1 1/2 inch length. Manufactured from hardened steel with phosphate coating for corrosion resistance and improved lubrication during installation. The hex socket drive allows high torque application in confined spaces where wrenches cannot reach. Suitable for machinery assembly, automotive repairs, and industrial equipment where secure fastening under load is required.

This 1 5/16" screw eye delivers a dependable anchor for everyday hanging and fastening in the right materials. The closed circular eye and straight shank with coarse V-threads work with a sharp pointed tip to drive cleanly into pilot holes and hold firmly. A glossy, silvery zinc finish blends with common hardware. Smooth surfaces with no collar under the eye keep a neat look.

These washer head cabinet screws are designed for secure and precise fastening during cabinet construction or installation. Their #8 diameter provides universal compatibility, and the sharp thread ensures quick penetration without pre-drilling. The white finish blends seamlessly with painted or laminated surfaces. Suitable for indoor and light outdoor use, they offer reliable holding power in wood and composite materials. A versatile and efficient choice for cabinetry and general woodworking projects.

These washer head cabinet screws provide strong and precise fastening for cabinetry and woodworking. Measuring 2 1/2" in length, they drive easily into solid wood, plywood, or MDF. The self-tapping thread allows quick installation without pre-drilling, while the white finish blends seamlessly with painted or laminated surfaces. Ideal for cabinet construction and assembly, they also suit various indoor and light outdoor projects. A convenient, high-performance option for clean and secure fastening.