Screws and anchors

Ex EDGE CLIP fasteners simplify the installation of grooved wood, composite, and PVC decking boards. They fit securely into the groove before being fastened with the included T15 bit, allowing for accurate placement in a single pass. The NEVER-MISS guide ensures straight, consistent alignment. For added comfort, consider installing while standing using the CAMO DRIVE or ClipDRIVE tools. Thanks to the T-15 StarDrive bit, pull-through risk is reduced, delivering a clean, reliable result. For best performance, use a standard drill; impact drivers may damage the clips.

Edge Collated Screws provide discreet fastening, offering a high-end look at an affordable price. Specifically designed for use with the CAMO DRIVE tool, they ensure a fast and clean installation with no visible screws on the surface. Their patented bevelled tip reduces the risk of splitting by removing material as the screw is driven in. Suitable for wood, PVC, or composite boards with a thickness of 1 to 1 1/2 inches, they provide strong holding power and a neat finish, even in demanding conditions.

This galvanized steel dock hinge is designed to securely connect two floating dock sections. With its 1/2" pin, it ensures a stable yet flexible connection, allowing the dock structure to adapt to water movement while maintaining excellent mechanical strength. Its galvanized coating provides long-lasting corrosion resistance, making it ideal for marine environments. Easy to install, it ensures a secure and reliable fastening, extending the lifespan of the dock.

The CAMO® LEVER tool simplifies and speeds up the installation of grooved deck boards by holding boards and clips firmly in place before fastening. Designed to straighten even warped boards, it easily adapts to wood or steel joists between 1½" and 3" wide. Ideal for installing treated wood, cedar, and softwood boards, it can also be used with other board types featuring secondary spacers. Thanks to its multidirectional lever, it locks quickly in a single motion, saving valuable time on any jobsite.

The ClipDRIVE tool drastically speeds up the installation of grooved deck boards, offering up to 5 times greater efficiency. Compatible with CAMO® universal deck clips, it attaches directly to your drill for easy operation. Its adjustable-length handle and weighted nose ensure precise screw targeting. Lightweight and ergonomic, it suits professional needs while reducing fatigue during extended work sessions.

These 304 stainless steel starter clips provide a secure and discreet fastening solution for grooved deck boards. Ideal for the first and last boards, they ensure a smooth surface with no visible fasteners, while offering excellent corrosion resistance. They can also be used as L-brackets. Each box covers approximately 30 linear feet with 16-inch joist spacing.

Driver bits are engineered specifically for use with the CAMO DRIVE and ClipDRIVE tools. The bits engage quickly and easily with the screw heads with reduced cam-outs, and are color-coded with a band for quick identification, orange and yellow for Edge and Clip fastening, black for Face fastening.

Ex EDGE CLIP fasteners ensure quick and secure installation of grooved decking boards made from wood, composite, or PVC. They clip firmly into the groove before being fastened using the included T15 bit, ensuring precise placement from the very first pass. The NEVER-MISS guide helps maintain perfect alignment for each clip. For added comfort, install while standing using CAMO DRIVE or ClipDRIVE tools. The T-15 StarDrive system reduces the risk of pull-through for a flawless finish. A standard drill is recommended—avoid using impact drivers, which could damage the fasteners.

The ClipDRIVE tool drastically speeds up the installation of grooved deck boards, offering up to 5 times greater efficiency. Compatible with CAMO® universal deck clips, it attaches directly to your drill for easy operation. Its adjustable-length handle and weighted nose ensure precise screw targeting. Lightweight and ergonomic, it suits professional needs while reducing fatigue during extended work sessions.

Specifically designed for cabinet construction and installation, these screws provide superior, long-lasting fastening. Their Torx drive prevents stripping and ensures stable insertion, while the washer-style head offers a flush and clean grip. Equipped with W-Cut technology for easy driving and a Zip-Tip self-tapping point for pre-drill-free installation, they are made from case-hardened steel for enhanced strength. The Climatek coating, compliant with AC257 standards, provides corrosion protection, making them ideal for indoor and outdoor use, even on treated wood.

The Cabinet™ screws are designed to simplify cabinet installation and construction. Their #8 (4 mm) diameter is a universal size, making them ideal for a wide range of interior and exterior projects, while their low profile provides a discreet and clean finish, perfectly integrating into tight spaces. Versatile, strong, and durable, they are suitable for both professionals and demanding DIYers.

With EDGEX clips, installing grooved decking boards becomes simple, consistent, and visually clean. Designed for angled installation on wood joists, they ensure precise 3/16 in (4.7 mm) spacing thanks to their integrated design. Their smart construction holds them in place within the groove until secured. The included NEVER-MISS™ guide helps with accurate alignment, while CAMO® ClipDRIVE or DRIVE tools support an ergonomic stand-up installation. The kit also includes a T-15 Star Drive bit.

1 7/8" 305 stainless steel fascia screws

Screw fas.#37 dr/ash/ket(100)

These Deck Finishing/Trim Screws are designed for interior and exterior finishing applications, offering a clean, professional look. Featuring an incredibly small head, they blend seamlessly into wood trim, deck rails, stairs, banisters and more. Designed for use with pressure-treated lumber and built to withstand Canadian climates, these screws provide lasting performance and precision. This convenient 100-pack delivers durability and detail ideal for various construction and carpentry projects.

These Deck Finishing/Trim Screws are ideal for all interior and exterior finishing applications. These screws are crafted with a #9 gauge and a length of 5-in, perfect for securing your deck and trim with precision. The smaller head ensures a clean, minimal appearance, allowing the beauty of your decking material to stand out. This convenient 50-pack of finishing screws is also suitable for exterior wood trim, stairs, banisters, window and door trim, base boards, crown moulding and joining cabinets.

These Deck Finishing/Trim Screws are ideal for all interior and exterior finishing applications. These screws are crafted with a #8 gauge and a length of 2-3/4-in, perfect for securing your deck and trim with precision. The smaller head ensures a clean, minimal appearance, allowing the beauty of your decking material to stand out. This convenient 100-pack of finishing screws is also suitable for exterior wood trim, stairs, banisters, window and door trim, base boards, crown moulding and joining cabinets.

Screws and Plugs #10 X 2 3/4"

Screws and Plugs #10 X 2 3/4"

CabinetMC screws, with a #8 gauge (4 mm), are ideal for cabinet installation and fastening. Their low-profile design ensures a discreet and efficient fit, suitable for a variety of indoor and outdoor projects. Simple to install and delivering a neat finish, they are perfect for tight spaces, offering a reliable and versatile solution for both experts and DIYers.

Screws and Plugs #10 X 2 3/4"

These headless finishing nails are designed for projects where discretion matters. Ideal for cabinetry and delicate trim work, they provide a clean hold with virtually no surface marks. Their electro-galvanized coating protects against rust in low-humidity environments. Easy to load into compatible nailers, they come boxed for recurring use in the shop or on-site.

Built for structural work, these 21° stick nails measure 5 1/8" long with a .148" diameter. Their smooth, bright finish allows for clean penetration with reduced wood splitting, while providing solid holding power. Perfect for framing, walls, or heavy-duty assembly. Designed for plastic-collated angled nailers, they’re packaged in bulk to meet the demands of residential or commercial jobs.

Offering a complete solution for fine finish work, this multipack includes five nail lengths: 1/2", 5/8", 3/4", 1", and 1 3/16". Made of electro-galvanized steel, they resist rust in dry or lightly humid settings. Their fine gauge and headless design allow for discreet fastening—ideal for moulding, trim, or fine woodworking. Compatible with 23-gauge pin nailers, they’re perfect for both pros and seasoned DIYers.

Perfect for detailed finishing jobs, these headless nails drive into wood cleanly without cracking or leaving visible marks. Their slim profile suits precision tasks like frames, cornices, or fine joinery. The electro-galvanized finish adds corrosion resistance for use in dry to mildly humid areas. Compatible with many nailer models, they come boxed and ready for both home and professional use.

Compatible with fine-gauge nailers, these stainless steel finishing nails secure mouldings, panels, or trims with a clean, professional finish. Their slim profile helps prevent surface damage during insertion. Designed to resist rust, they’re a solid choice for both indoor projects and protected outdoor settings. Packaged in convenient quantities for both pros and advanced DIYers.

Designed for delicate finishing, these headless nails blend into wood surfaces for a clean, mark-free appearance. Their fine size is ideal for precision tasks like cabinetry, moulding, or trim work. The electro-galvanized coating helps resist rust in dry or low-exposure settings. Easy to load into compatible nailers, they come boxed for frequent residential or commercial use.

These stainless steel finishing nails are made to fasten decorative elements without leaving visible marks. Used with compatible nailers, they penetrate delicate materials smoothly without chipping. Thanks to their corrosion resistance, they’re suitable for damp spaces or covered outdoor use. Packaged neatly in boxes, they’re ready for a range of residential or professional tasks.

Perfect for precise attachment of mouldings or panelling, these stainless steel finishing nails deliver clean entry without damaging the surface. They work with most nailers and are easy to use for small carpentry jobs. Rust-resistant, they’re also appropriate for areas prone to humidity. Supplied in boxes, they meet the needs of pros and detail-minded hobbyists alike.

Perfect for finishing work, these stainless steel brad nails are designed for use with compatible nailers to discreetly secure mouldings, trim, or panels. Their fine gauge allows for clean insertion without splitting the material, while offering reliable holding strength. Naturally resistant to corrosion, they’re suitable for both indoor use and sheltered outdoor applications. Packed in boxes, they’re a great choice for both pros and demanding DIYers.

Ideal for trim projects, these stainless steel nails work with compatible nailers to attach mouldings, decorative trim, or framing pieces with precision. Their slim design prevents material from cracking and provides strong holding power. Moisture-resistant by nature, they’re well-suited for indoor areas or covered outdoor spaces.

This screw is designed to join composite and wood.

This screw is designed to join composite and wood.

Specifically crafted for cabinet construction, CabinetMC screws are #8 gauge (4 mm), making them universally applicable. Perfect for cabinets and numerous indoor and outdoor projects, they stand out with their low-profile head and optimized design. They ensure easy installation and a flawless finish, even in narrow areas. Whether for professionals or DIYers, these screws are a versatile and practical solution.

This screw is designed to join composite and wood.

CabinetMC screws are designed to meet the demands of cabinet installation and construction. With their #8 gauge (4 mm) size, they provide versatile use for a variety of projects, both indoors and outdoors. Equipped with a low-profile head and smart design, they offer fast installation and an aesthetic finish. Suitable for tight spaces, these screws are a wise choice for professionals and DIY enthusiasts.

The CabinetMC screws are specially designed for cabinet installation and construction. Manufactured in #8 gauge (4 mm) for a universal size, they are perfect not only for cabinets but also for a wide range of indoor and outdoor projects. Their low-profile head and innovative design allow for easy installation and a neat finish, even on the most demanding jobs. Ideal for securing elements in tight spaces, these screws are a versatile choice for professionals and DIY enthusiasts alike.

The RT Composite screw, with its reverse threading under the head, is perfect for composite and cellular PVC trim, effectively preventing "mushrooming." Its unique design allows for installation without pre-drilling, ensuring a discreet and durable hold. Ideal for a clean finish, it adapts to the most robust materials for quality results.

Designed for composite and cellular PVC trim, the RT Composite screw features reverse threading under the head, preventing "mushrooming" and ensuring a neat finish. This trim screw is easy to install without pre-drilling, providing a strong and durable hold, even in the most demanding materials, while ensuring a clean finish.

The RT Composite screw is specially designed for composite and cellular PVC trim. Its unique reverse threading under the head prevents "mushrooming" for a clean and discreet finish. This trim screw offers easy installation without pre-drilling, ensuring a strong and durable hold in even the most demanding materials.

These washer head cabinet screws are designed for secure and precise fastening during cabinet construction or installation. Their #8 diameter provides universal compatibility, and the sharp thread ensures quick penetration without pre-drilling. The white finish blends seamlessly with painted or laminated surfaces. Suitable for indoor and light outdoor use, they offer reliable holding power in wood and composite materials. A versatile and efficient choice for cabinetry and general woodworking projects.

These washer head cabinet screws provide strong and precise fastening for cabinetry and woodworking. Measuring 2 1/2" in length, they drive easily into solid wood, plywood, or MDF. The self-tapping thread allows quick installation without pre-drilling, while the white finish blends seamlessly with painted or laminated surfaces. Ideal for cabinet construction and assembly, they also suit various indoor and light outdoor projects. A convenient, high-performance option for clean and secure fastening.

These washer head cabinet screws provide strong, precise fastening for cabinet assembly and installation. Their #8 diameter ensures universal compatibility, while the self-tapping thread drives easily without pre-drilling. The white finish blends seamlessly with painted or laminated surfaces. Approved for treated lumber, they’re ideal for both indoor and light outdoor use. Designed for superior clamping and efficient installation, they offer a dependable solution for cabinetry and finishing projects.

These washer head cabinet screws are designed for secure and precise fastening during cabinet construction or installation. Their #8 diameter provides universal compatibility, and the sharp thread ensures quick penetration without pre-drilling. The white finish blends seamlessly with painted or laminated surfaces. Suitable for indoor and light outdoor use, they offer reliable holding power in wood and composite materials. A versatile and efficient choice for cabinetry and general woodworking projects.

This hot-dipped galvanized T-joint is designed to securely fasten stationary dock structures or small floating docks. It provides a strong connection while allowing precise adjustments thanks to its slotted holes. Easy to install, it requires only four bolts and is used in pairs for each junction. Its 3/4" pin and safety clip ensure a reliable hold, even in demanding conditions. Compatible with reinforcement plates and interior dock corners, it contributes to a durable, corrosion-resistant structure.

Whether it's for Christmas, Easter, Halloween, marking a new season, or a special celebration, there are plenty of occasions to hang a wreath. This set of three metal door hooks in assorted colours of red, black, and green will allow you to securely hang a wreath. Their hook design ensures a firm hold and solid support, while their simple construction guarantees a lifetime of use.

These #8 x 1 3/16" oval head screws are designed for cabinet and woodworking applications. Their maple-colored finish blends seamlessly with light wood surfaces for a clean and professional look. The oversized oval head provides strong grip and minimizes visible marks. Each pack includes 20 screws and a T-15 bit for quick, precise installation. Ideal for cabinetry, furniture assembly, or interior renovations where both strength and appearance matter.

Get a 18-8 type-A square drive with this pan head screw.