Bolts

Hex lock nut with nylon insert in 10-32 thread size. NE2 grade steel construction with zinc finish. Conforms to UNC-UNF Class 2B threading standards. Nylon insert provides prevailing torque locking function. For structural and mechanical fastening applications.

These 3/8" x 10" lag bolts feature Grade A zinc-plated steel with galvanized finish for reliable outdoor performance. The hexagonal head allows secure wrench or socket installation, while the partial coarse thread provides strong grip in wood framing. Designed for structural connections in deck construction, wooden fences, and heavy-duty timber assemblies. For medium to large projects requiring consistent fastening strength.

These 1/4" x 1" lag bolts feature Grade A zinc-plated steel construction with galvanized finish for corrosion resistance. The hex head design allows secure fastening with a wrench or socket, while the partial coarse thread provides strong grip in wood. Suitable for outdoor structural connections including fence posts, deck framing, and ledger board attachments.

This 1/2" x 3" hexagonal bolt features full-thread design for maximum grip along the entire shank length. Zinc-plated finish provides corrosion resistance for indoor and protected outdoor applications. Standard hex head allows secure fastening with common wrenches and sockets. For construction, framing, and general assembly projects requiring reliable threaded fasteners.

These 5/16" x 1" carriage bolts feature hot-dip galvanized steel construction for superior corrosion resistance. The round head design with square shoulder prevents spinning during tightening. Engineered for outdoor structural applications where weather exposure demands lasting protection. Suitable for deck framing, fence assembly, and general exterior fastening. For medium to large projects.

These 3/8" x 4 1/2" carriage bolts feature hot-dip galvanized steel construction for superior corrosion resistance. The round head with square neck prevents spinning during installation, ensuring a secure fastening. Designed for outdoor structural applications including deck framing, fence assembly, and wood-to-wood connections.

These 1/2" x 4 1/2" carriage bolts feature hot-dip galvanized steel construction for superior corrosion resistance. The round head with square shoulder prevents spinning during installation, securing tightly into wood. Designed for outdoor structural applications including deck framing, fence posts, and pergola construction. Provides sufficient quantity for medium-sized projects requiring reliable, weather-resistant fastening.

Aluminum Chicago screw, 8-32 thread, 1 inch length. Barrel-shaped flange with internally threaded boss. Knurled surface for one-sided assembly. Imperial sizing. Suitable for binding applications requiring low-profile fasteners with rear-inaccessible installations.

Aluminum Chicago screw measuring 8-32 x 3/4 inch. This fastener features a barrel-shaped flange with an internally threaded boss that sits within the components being joined. The knurled barrel allows one-sided assembly without access to the back. Ideal for leather goods, binders, portfolios, and signage where a low-profile, clean appearance is required. Also known as architectural bolts or screw post binding.

These aluminum Chicago screws provide clean, low-profile fastening for two components. Each two-piece set pairs a slotted machine screw with a matching internally threaded barrel for a secure hold. The standard 8-32 thread and 1/4" length suit thin assemblies while keeping surfaces smooth. Low-profile round heads stay unobtrusive and help alignment during tightening. The slotted drive simplifies installation and removal and allows one-sided assembly when access is limited. A silver-tone, slightly reflective finish blends easily with hardware. For maintenance, assembly, and everyday projects.

Aluminum Chicago screw measuring 8-32 x 1/2 inch. This two-piece fastener features a barrel-shaped flange and internally threaded boss for secure one-sided assembly. The knurled barrel allows tool-free tightening while the low-profile design provides a clean, discreet finish. Ideal for leather goods, portfolios, binders, signage, and decorative hardware where a flush appearance is required.

Zinc-plated hanger bolts measuring 5/16" diameter by 1 3/4" length, designed for furniture and table leg attachment. Features wood screw threading on one end for secure insertion into wood, and machine threading on the opposite end for nut fastening. The dual-thread design creates a strong, removable connection point ideal for mounting table legs, railings, and similar woodworking applications.

These 1/4" x 1 3/4" zinc-plated hanger bolts feature dual threading for secure wood-to-metal connections. One end has a wood screw thread for embedding into lumber, while the opposite end accepts a standard nut for fastening. Ideal for attaching table legs, furniture components, and hardware where a removable bolt connection is needed. The zinc coating provides corrosion resistance for indoor applications.

M5 x 40 mm hex head bolts in grade 8.8 zinc-plated steel, sold in a pack of 5. Full-thread design provides maximum engagement for secure fastening in high-strength applications. The zinc plating offers corrosion resistance for indoor and sheltered outdoor use. Metric sizing ensures compatibility with standard M5 nuts and washers. Suitable for machinery assembly, structural connections, and equipment mounting where reliable clamping force is required.

These M5 x 30 mm hex head bolts deliver dependable fastening for assemblies and repairs. Made from grade 8.8 zinc-plated steel, they provide strength with a bright silver-tone finish. The shank is fully threaded to the underhead with a 0.8 mm metric pitch for continuous engagement and an accurate fit with compatible M5 nuts. An external hex head accepts a wrench or socket for efficient installation. Each bolt is marked 8.8 for quick identification. To support installs, maintenance, and everyday projects.

M5 x 12 mm hex head bolts in grade 8.8 zinc-plated steel. Full-thread design provides maximum grip along the entire shank length. Grade 8.8 rating delivers high tensile strength for demanding structural and mechanical assemblies. Zinc plating offers corrosion resistance for indoor use and light outdoor exposure. Metric sizing ensures compatibility with standard M5 nuts and washers. Suitable for machinery, automotive repairs, metal fabrication, and general fastening applications requiring reliable clamping force.

M4 x 30 mm hex head bolts in grade 8.8 zinc-plated steel. Full-thread design provides maximum grip along the entire shank length. Grade 8.8 rating ensures reliable performance in high-stress structural and mechanical applications. Zinc plating protects against corrosion in indoor environments. Standard metric threading compatible with M4 nuts and tapped holes. For small assembly projects and repairs.

M4 x 12 mm hex head bolts in grade 8.8 zinc-plated steel, full thread design. These metric fasteners deliver high tensile strength for demanding structural and mechanical connections. The zinc plating provides corrosion resistance for indoor applications and light outdoor use. Square under-head prevents rotation during tightening. Suitable for machinery, metal assemblies, and equipment requiring reliable clamping force.

These 5/16" x 4 1/2" carriage bolts feature hot-dip galvanized steel construction for superior corrosion resistance in outdoor applications. The round head with square neck design provides a smooth finish and prevents spinning during installation. Engineered for structural connections on decks, fences, pergolas, and other exterior wood projects.

Hot-dip galvanized steel carriage bolts measuring 1/4" diameter by 6" length. The round head design provides a finished appearance while the square shoulder locks into wood to prevent spinning during installation. Hot-dip galvanizing delivers superior corrosion resistance compared to mechanically plated fasteners, making these bolts suitable for exterior applications including deck construction, fence assembly, and outdoor woodworking projects.

These 1/4" x 5" carriage bolts feature hot-dip galvanized steel construction for superior corrosion resistance in outdoor applications. The round head design with square shoulder prevents spinning during installation, ensuring a secure fastening. Suitable for wood-to-wood and wood-to-metal connections on decks, fences, and exterior structures.

This 1/4" x 4 1/2" galvanized steel carriage bolt features a round head with a square shoulder that locks into wood to prevent spinning during tightening. Hot-dip galvanized finish provides superior corrosion resistance for exterior applications. Designed for structural connections in decks, fences, pergolas, and outdoor furniture.

These Grade 2 hex bolts deliver reliable fastening for assemblies and repairs at home or on the jobsite. Each 3/8"-16 bolt measures 4-1/2" long and is zinc-plated for consistent performance in general hardware tasks. The hex head fits standard wrenches, and the partially threaded shank provides firm clamping where alignment matters. Each bolt arrives with a matching hex nut and washer to complete the connection. Supplied as a pack of three, they are a practical choice for everyday maintenance and small builds that call for straightforward, compatible hardware.

This 5/16" x 3/4" carriage bolt set includes zinc-plated steel bolts with matching nuts and washers. The round head and square shoulder design pulls into wood as the nut tightens, creating a secure flush connection without spinning. Zinc plating provides moderate corrosion resistance for interior and sheltered exterior applications. Assemblies for wood-to-wood or wood-to-metal fastening projects.

These 1/4"-20 x 3/4" round head carriage bolts are designed for wood assemblies and straightforward repairs. The square shoulder under the head pulls into the wood as you tighten, preventing bolt spin and simplifying installation. A smooth, domed head with no drive leaves a clean finished look. Made of zinc‑plated steel, the hardware offers moderate corrosion protection in typical conditions. Each 8-pack includes matching hex nuts and flat washers for a complete setup. A practical choice for everyday builds, maintenance, and general fastening where a secure, consistent clamp is needed.

This 1/2" x 3 1/2" carriage bolt set includes nut and washer for complete fastening. Made from zinc-plated steel for moderate corrosion resistance. The round head with square shoulder beneath pulls into wood during tightening, preventing spin and creating a flush surface. Designed primarily for wood-to-wood or wood-to-metal connections in construction, decks, and outdoor structures.

This 1/2" x 1 1/2" carriage bolt set includes nut and washer for complete fastening. The zinc-plated steel construction provides moderate corrosion resistance for interior and sheltered exterior applications. The round head with square shoulder beneath pulls into wood as the nut tightens, preventing spin and creating a flush surface. Suitable for wood-to-wood and wood-to-metal connections in furniture, fencing, and general construction.

Stainless steel carriage bolt measuring 1/4" diameter by 3" length. The round pan head with square shoulder prevents spinning during tightening, creating a smooth finished surface. Corrosion-resistant stainless steel construction ensures long-lasting performance in outdoor and moisture-prone applications. Suitable for wood-to-wood and wood-to-metal fastening in decks, fences, docks, and exterior furniture.

This 1/4" x 2 1/2" stainless steel carriage bolt features a smooth dome head that pulls flush into wood for a clean, tamper-resistant finish. The square shoulder under the head locks into the material, preventing spinning during tightening. Ideal for outdoor furniture, fencing, deck railings, and marine applications where corrosion resistance is essential.

Stainless steel carriage bolt measuring 1/4" diameter by 2" length. Features a smooth, round dome head with a square shoulder that locks into wood to prevent spinning during tightening. Corrosion-resistant stainless steel construction ensures durability in outdoor and moisture-prone environments. Suitable for wood-to-wood and wood-to-metal fastening in decks, fences, docks, and general construction.

These 1/4" x 1 1/2" carriage bolts are made of stainless steel with a satin, metallic silver finish. A domed, smooth head with no drive recess sits over a square neck that locks into the mating hole for spin resistance. The shank features partial machine threading and a flat-cut tip with a slight chamfer for easy start. They pair with compatible nuts and washers. They suit repeatable assembly in the shop or at home when a clean, low-profile head and dependable hardware are preferred.

Stainless steel carriage bolt, 1/4" diameter, 1" length. Round dome head with square shoulder beneath. Corrosion-resistant stainless steel material. Standard carriage bolt thread pattern. Designed for wood-to-wood and wood-to-metal fastening where the bolt head remains exposed. Requires matching 1/4" nut and washer for installation.

This 1/2" x 12" lag screw is manufactured from zinc-plated steel with a galvanized coating for corrosion resistance. The hexagonal head accepts standard wrenches and socket drivers. Partial coarse threading provides strong holding power in wood applications. Suitable for securing deck ledger boards, fence posts, and heavy timber connections. Meeting ASTM A307 Grade A standard.

These 1/2" x 10" lag screws are manufactured from Grade A zinc-plated steel with a galvanized finish for reliable corrosion resistance in outdoor environments. Each screw features a hexagonal head for secure wrench installation and partial coarse threading for strong grip in wood. Designed for heavy-duty fastening in structural applications such as deck framing, fence posts, and outdoor timber connections. Meeting ASTM A307 Grade A standard.

These 1/2" x 8" lag screws provide strong fastening for heavy-duty outdoor wood construction. Made from Grade A zinc-plated steel with a galvanized finish for corrosion resistance. The hexagonal head allows secure wrench tightening, while the partial coarse thread ensures solid grip in wood. Suitable for deck framing, fence posts, and structural wood connections. Meeting ASTM A307 Grade A standard.

Galvanized steel carriage bolts measuring 1/2" diameter by 7" length. Hot-dip galvanized finish provides corrosion resistance for exterior applications. Round head with square shoulder configuration. Sold in packs of 20 units. Intended for wood-to-wood and wood-to-metal fastening in deck, fence, and outdoor structural assemblies requiring through-bolt connections. Meeting ASTM A307 Grade A standard.

This 3/8" x 7" galvanized carriage bolt features a round head and square shoulder that locks into wood to prevent spinning during tightening. Hot-dip galvanized steel construction provides superior corrosion resistance for outdoor applications. The smooth domed head delivers a finished appearance without exposed fastener slots. Suitable for deck framing, fence construction, and structural wood connections. Meeting ASTM A307 Grade A standard.

Galvanized steel carriage bolts, 1/4" diameter by 1" length. Hot-dip galvanized coating provides corrosion resistance for exterior use. Round head configuration with integral square shoulder for wood applications. Mechanically plated fastener suitable for deck, fence, and general outdoor construction assemblies. Meeting ASTM A307 Grade A standard.

Built for dependable fastening, this Grade 5 hex bolt measures 5/8" in diameter by 2" long with a partially threaded shank and smooth bearing section. The zinc‑plated, reflective silver finish presents a clean, consistent look. A hex head fits standard wrenches and sockets, and three radial marks on the head identify the Grade 5 rating. A flat washer face under the head and chamfered edges help the bolt seat flush, while a flat, slightly chamfered tip aids thread start. It suits general assembly in wood or metal, on site or in the shop.

These 3/8" x 10" hex bolts delivers reliable fastening for structural and mechanical applications. Manufactured from Grade 5 steel with zinc plating for corrosion resistance, these bolts provide high tensile strength for demanding assemblies. The hexagonal head allows secure wrench engagement for proper torque application. Suitable for wood-to-wood, wood-to-metal, and metal-to-metal connections in construction, equipment assembly, and repair projects requiring dependable holding power.

Build secure wood assemblies with these 1/4" x 3/4" carriage bolts. Made of zinc-plated steel, they offer moderate corrosion protection for indoor or sheltered projects. The round, domed head gives a clean finish, and the square neck bites into the wood to stop rotation as the nut is tightened. The machine-threaded shank works with 1/4" nuts; the head has no drive recess, so tightening is from the nut side. Compliant with ASTM A307 Grade A.

These 1/4" x 60 mm assembly bolts feature a PowerHead design for enhanced fastening grip in furniture applications. The fine 20 TPI thread ensures strong holding power, while the included hex key allows for secure installation. Durable construction withstands impact and vibrations, keeping assembled components firmly in place. Ideal for joining furniture panels and structural components.

Built for furniture assembly, these JCB (joint connector) bolts provide reliable holding power. Each 1/4"-20 bolt is 50 mm long with a fully threaded shank and a flat tip for clean engagement in matching threads. The low-profile round head features an internal hex socket for controlled tightening with the included L-shaped hex key, and the enhanced head design improves fastening compared to standard heads. They help keep assemblies secure under impact and vibration.

Assembly bolt measuring 1/4 in diameter by 40 mm length with hex key included. These JCB-type bolts feature a PowerHead design for improved fastening grip on furniture joints. The 20 TPI fine thread ensures strong holding power under stress and vibration. Supplied in a pack of four with matching hex key for quick installation. Suitable for furniture assembly and cabinetry where secure, removable connections are required.

Built for furniture assembly, these 1/4"‑20 x 35 mm assembly bolts deliver reliable fastening. The Type B PowerHead, with a wide low‑profile round head, seats cleanly and provides strong drive through the internal hex socket, and an L‑shaped hex key is included for convenience. A 20 TPI thread and blunt tip with threads along most of the shank help draw parts together and hold tight. Durable construction helps keep joints secure under impact and vibration.

These 1/4" x 30 mm JCB assembly bolts feature a PowerHead design for increased fastening torque on furniture projects. The fine 20 TPI thread ensures strong holding power, while the included hex key allows secure tightening. Durable construction resists loosening from impact and vibration, making them reliable for joining furniture panels and components.

These 3/8" x 3" stainless steel hex bolts are made for versatile fastening applications. The hexagonal head design allows secure wrench or socket grip during installation. Stainless steel construction provides excellent corrosion resistance for indoor, outdoor, and humid environments. Suitable for wood, metal, and composite assemblies where moderate fastening force is required in residential and commercial projects.

These stainless steel hex bolts provides reliable corrosion-resistant fastening for indoor and outdoor applications. The hexagonal head allows easy tightening with standard wrenches. Stainless steel construction ensures durability in moisture-prone environments. Suitable for decks, fences, outdoor furniture, and general assembly where rust resistance is required.