Nuts, bolts and washers

Galvanized steel carriage bolts, 1/4" diameter by 1" length. Hot-dip galvanized coating provides corrosion resistance for exterior use. Round head configuration with integral square shoulder for wood applications. Mechanically plated fastener suitable for deck, fence, and general outdoor construction assemblies. Meeting ASTM A307 Grade A standard.

Built for dependable fastening, this Grade 5 hex bolt measures 5/8" in diameter by 2" long with a partially threaded shank and smooth bearing section. The zinc‑plated, reflective silver finish presents a clean, consistent look. A hex head fits standard wrenches and sockets, and three radial marks on the head identify the Grade 5 rating. A flat washer face under the head and chamfered edges help the bolt seat flush, while a flat, slightly chamfered tip aids thread start. It suits general assembly in wood or metal, on site or in the shop.

These 3/8" x 10" hex bolts delivers reliable fastening for structural and mechanical applications. Manufactured from Grade 5 steel with zinc plating for corrosion resistance, these bolts provide high tensile strength for demanding assemblies. The hexagonal head allows secure wrench engagement for proper torque application. Suitable for wood-to-wood, wood-to-metal, and metal-to-metal connections in construction, equipment assembly, and repair projects requiring dependable holding power.

Build secure wood assemblies with these 1/4" x 3/4" carriage bolts. Made of zinc-plated steel, they offer moderate corrosion protection for indoor or sheltered projects. The round, domed head gives a clean finish, and the square neck bites into the wood to stop rotation as the nut is tightened. The machine-threaded shank works with 1/4" nuts; the head has no drive recess, so tightening is from the nut side. Compliant with ASTM A307 Grade A.

These 1/4" x 60 mm assembly bolts feature a PowerHead design for enhanced fastening grip in furniture applications. The fine 20 TPI thread ensures strong holding power, while the included hex key allows for secure installation. Durable construction withstands impact and vibrations, keeping assembled components firmly in place. Ideal for joining furniture panels and structural components.

Built for furniture assembly, these JCB (joint connector) bolts provide reliable holding power. Each 1/4"-20 bolt is 50 mm long with a fully threaded shank and a flat tip for clean engagement in matching threads. The low-profile round head features an internal hex socket for controlled tightening with the included L-shaped hex key, and the enhanced head design improves fastening compared to standard heads. They help keep assemblies secure under impact and vibration.

Assembly bolt measuring 1/4 in diameter by 40 mm length with hex key included. These JCB-type bolts feature a PowerHead design for improved fastening grip on furniture joints. The 20 TPI fine thread ensures strong holding power under stress and vibration. Supplied in a pack of four with matching hex key for quick installation. Suitable for furniture assembly and cabinetry where secure, removable connections are required.

Built for furniture assembly, these 1/4"‑20 x 35 mm assembly bolts deliver reliable fastening. The Type B PowerHead, with a wide low‑profile round head, seats cleanly and provides strong drive through the internal hex socket, and an L‑shaped hex key is included for convenience. A 20 TPI thread and blunt tip with threads along most of the shank help draw parts together and hold tight. Durable construction helps keep joints secure under impact and vibration.

These 1/4" x 30 mm JCB assembly bolts feature a PowerHead design for increased fastening torque on furniture projects. The fine 20 TPI thread ensures strong holding power, while the included hex key allows secure tightening. Durable construction resists loosening from impact and vibration, making them reliable for joining furniture panels and components.

These 3/8" x 3" stainless steel hex bolts are made for versatile fastening applications. The hexagonal head design allows secure wrench or socket grip during installation. Stainless steel construction provides excellent corrosion resistance for indoor, outdoor, and humid environments. Suitable for wood, metal, and composite assemblies where moderate fastening force is required in residential and commercial projects.

These stainless steel hex bolts provide reliable fastening with moderate holding strength for general construction and maintenance applications. The 3/8" diameter and 2 1/2" length accommodate standard connection requirements while the hexagonal head enables efficient installation with common socket tools. Stainless steel construction offers excellent corrosion resistance for both interior and exterior projects. Ideal for furniture assembly, deck construction, and general hardware applications where rust prevention matters but extreme tensile strength isn't required.

These stainless steel hex bolts provides reliable corrosion-resistant fastening for indoor and outdoor applications. The hexagonal head allows easy tightening with standard wrenches. Stainless steel construction ensures durability in moisture-prone environments. Suitable for decks, fences, outdoor furniture, and general assembly where rust resistance is required.

Stainless steel hexagonal head bolts measuring 5/16" diameter by 3" length. Corrosion-resistant material suitable for applications requiring protection against rust. Standard hex head configuration accepts common wrenches and sockets. Coarse thread pattern for general-purpose fastening in wood, metal, and composite materials.

Stainless steel hexagonal head bolts measuring 5/16" diameter by 2 1/2" length. Corrosion-resistant stainless steel construction. Hex head configuration accepts standard wrenches and sockets. Designed for light to medium-duty fastening applications. Threaded shank provides secure mechanical connection with compatible nuts.

Stainless steel hexagonal head bolts measuring 5/16" diameter by 2" length. Corrosion-resistant stainless steel construction. Hex head configuration accepts standard wrenches and sockets. Designed for light to medium-duty fastening applications. Threaded shank provides secure mechanical connection with compatible nuts.

These 5/16" x 1 1/2" stainless steel hex bolts for light to medium-duty fastening applications. The hexagonal head provides secure wrench grip for controlled tightening. Stainless steel construction offers excellent corrosion resistance for indoor and outdoor use. Suitable for wood, metal, and composite assemblies where moisture exposure is a concern.

These 1/4" x 3" stainless steel hex bolts for light to medium-duty fastening applications. The hexagonal head provides secure wrench grip for reliable installation. Stainless steel construction ensures corrosion resistance for indoor and outdoor use. Suitable for wood, metal, and composite assemblies where rust prevention is essential.

These of 1/4" x 2 1/2" stainless steel hex bolts provides reliable fastening for light to medium-duty applications. The hexagonal head design allows secure grip with standard wrenches and socket tools. Stainless steel construction offers excellent corrosion resistance for indoor and outdoor use. Suitable for wood, metal, and composite assemblies where moderate fastening force is required.

This stainless steel hex bolt delivers reliable corrosion-resistant fastening for moderate-load applications where rust resistance is critical. The 1/4-inch diameter threading creates secure connections in wood, metal, and composite materials without excessive clamping force that could damage softer materials. Ideal for outdoor hardware installations, marine environments, deck construction, furniture assembly, and equipment mounting projects that require long-lasting performance in challenging conditions but don't demand maximum holding strength.

Build your outdoor projects with confidence using these 1/2" x 4 1/2" galvanized lag screws. This convenient 25-pack delivers Grade A zinc-plated steel that stands up to weather and moisture, making them perfect for deck construction, fence building, and other exterior woodworking. The hexagonal head allows easy installation with a standard wrench, while the coarse partial threading bites deep into lumber for a secure, lasting hold.

Build your outdoor projects with confidence using these 3/8" x 4 1/2" galvanized lag screws, conveniently packaged in a 50-pack. The Grade A zinc-plated steel construction with galvanized coating stands up to weather and moisture, making them perfect for decks, fences, and pergolas. The hexagonal head allows easy tightening with a standard wrench, while the coarse partial threading bites securely into wood for lasting connections you can count on.

These 5/16" x 2 1/2" dual-thread hanger bolts simplify wood-to-hardware assemblies, including table legs. Coarse wood-screw threads drive into wood; the opposite end provides clean machine threads to accept a nut or fitting. The headless, straight stud leaves a neat machine-threaded post once set, with a blunt tip on the machine end and a distinct transition between thread types. Made of metal with a shiny silver finish, the threads are well formed for consistent results. Packed 25 per clear plastic box for organized storage and repeat builds.

These 1/4" x 2 1/2" hanger bolts create secure wood-to-hardware connections. One end has a coarse wood thread with a tapered point for driving into wood; the other has a fine machine thread that accepts a nut or coupling to mount components. The headless, double-ended design sits flush for neat assemblies and is used for attaching furniture legs and similar parts. A bright metallic finish keeps the look clean and uniform. Supplied in a box of 25, they suit replacements and new installations for general hardware projects.

These 3/16" x 2.5" hanger bolts create a screw-in stud in wood for attaching hardware and components. The headless, double-ended format combines coarse tapered wood threads on one end with fine machine threads on the other to accept a nut. A straight cylindrical shank and defined pitch transition support easy alignment during setup. The bright silver finish and clean, uniform threads help achieve neat, consistent assembly. Supplied in a 25 pack, they suit batch installs, shop stock, and projects such as furniture legs or other wood-to-hardware connections.

Keep your projects securely fastened with these dependable 5/8" x 6" hex bolts. The grade 5 rating means you get solid holding power for deck framing, equipment mounting, and structural connections. A protective zinc coating helps these bolts stand up to moisture and weather, making them a practical choice for both indoor workshops and outdoor builds.

This 5/8-inch by 5-inch hex bolt features Grade 5 medium-carbon steel construction with zinc plating for corrosion resistance. The hexagonal head provides secure wrench grip for reliable tightening. These fasteners suit structural connections, equipment mounting, and general assembly where moderate tensile strength is required. Compatible with standard 5/8-inch nuts and washers.

This 5/8" x 3 1/2" hex bolt delivers reliable fastening for structural and heavy-duty applications. Grade 5 steel construction provides medium-high tensile strength suitable for automotive, machinery, and construction projects. Zinc plating protects against corrosion in indoor and sheltered outdoor environments. Compatible with standard 5/8" hex nuts and washers.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Get these round dowels equipped with color-coded ends for a better diameter recognition.

Tie your horse securely with this screw-on ring on the wall.

Design allows ring to swivel.

Use this bolt as a spare part or for new construction and fitting accessories.

Use this bolt as a spare part or for new construction and fitting accessories.

Use this bolt as a spare part or for new construction and fitting accessories.