Wires, sockets and plugs

This construction wire is used for residential installation in dry places, such as for an electric range connection.

This construction wire is used for residential installation in dry places, such as for an electric range connection.

This construction wire is used for residential installation in dry places, such as for an electric range connection.

Built for general construction wiring, this NMD90 12/2 cable provides a generous 98.4' length for longer runs, additions, and simple connections. Rated 300 V and 90°C, it features two wires under an outer red jacket. Its 12/2 build supports straightforward hookups while matching common construction practices. With extended reach, it suits longer pulls and additions while keeping on-site handling simple. A practical format for DIY users and professionals, it aligns with the NMD-7 construction designation for dependable, straightforward wiring tasks.

This NMD90 12-2 electrical cable measures 20 metres in length and features two 12 AWG copper conductors with a red outer jacket. Rated for 300 volts and 90 degrees Celsius, it meets CSA standards for residential and commercial construction wiring. The cable is suitable for general purpose branch circuits including outlets, switches, and lighting in dry locations. Designed for permanent installation in walls, ceilings, and attics where NMD90 wiring is permitted by the Canadian Electrical Code.

NMD90 12-2 electrical cable in a 10-metre length with red outer jacket. This 300-volt, 90°C-rated construction cable features two insulated 12 AWG copper conductors plus a bare ground wire. CSA-approved for residential and commercial wiring, it suits general-purpose circuits including outlets, switches, and lighting. The durable thermoplastic jacket resists moisture and abrasion for reliable in-wall installation.

This 5-metre NMD90 12-2 construction cable delivers reliable 300-volt capacity with 90°C temperature rating. Featuring two copper conductors in a red jacket, this NMD-7 rated cable meets Canadian electrical code requirements for residential wiring. Suitable for general-purpose branch circuits, lighting, and receptacle installations in dry locations throughout the home.

This 75-metre NMD90 14-2 electrical cable features two 14 AWG copper conductors rated for 300 volts and 90°C operation. Designed for permanent residential and commercial wiring, this red-jacketed cable meets Canadian Electrical Code requirements for dry indoor installations. The NMD-7 construction provides reliable performance for general-purpose circuits including lighting, outlets, and low-draw appliances throughout the building.

NMD90 12-2 electrical cable measuring 75 metres in length with yellow jacket for easy circuit identification. Rated for 300 volts and 90 degrees Celsius, this two-conductor copper cable meets Canadian Electrical Code requirements for residential and light commercial wiring. The 12 AWG conductors suit general-purpose branch circuits including outlets and lighting. Ideal for interior wiring in walls, ceilings, and attics where dry conditions prevail.

NMD90 12-2 AWG electrical cable in a 30-metre length with yellow jacket for easy circuit identification. Rated for 300 volts and 90 degrees Celsius, this two-conductor copper wire meets Canadian electrical code requirements for residential and commercial construction. The NMD-7 designation confirms compliance with dry location installations. Suitable for general-purpose branch circuits including lighting and receptacles in walls, ceilings, and attics.

NMD90 12-2 electrical cable measuring 20 metres in length with yellow jacket for easy circuit identification. Rated at 300 volts and 90 degrees Celsius for residential and commercial construction. Features two insulated copper conductors plus ground wire in a durable thermoplastic sheath. Approved for dry locations including walls, ceilings, and attics. Suitable for general-purpose branch circuits including lighting and receptacle wiring in accordance with Canadian Electrical Code requirements.

NMD90 12-2 electrical cable in a 10-metre length for residential and commercial construction. This 300-volt, 90°C-rated cable features two insulated copper conductors plus a bare ground wire. Suitable for general branch circuit wiring in dry locations. Meets Canadian Electrical Code requirements for interior installations including outlets, switches, and lighting circuits.

NMD90 14/2 AWG electrical cable in a 75-metre length with blue outer jacket. Rated for 300 volts and 90°C operating temperature. Contains two insulated copper conductors for general-purpose residential wiring. Suitable for interior branch circuits in dry locations. Meets Canadian Electrical Code requirements for permanent building wiring in walls, ceilings, and attics.

NMD90 14-2 AWG electrical cable in a 150-metre length for residential and light commercial wiring. This copper construction cable is rated for 300 volts and 90 degrees Celsius, meeting Canadian electrical code requirements. The two-conductor configuration with ground suits general-purpose circuits including lighting and receptacles. White outer jacket allows for easy identification during installation.

This NMD90 14/2 AWG electrical cable measures 75 metres in length and is rated for 300 volts and 90 degrees Celsius. Designed for residential and light commercial construction, it features two insulated copper conductors plus a ground wire within a durable thermoplastic jacket. The white outer sheathing allows easy identification during installation. CSA-approved for dry locations, this cable is suitable for general branch circuit wiring including outlets, switches, and lighting fixtures.

NMD90 14-2 electrical cable in a 30-metre length with white sheathing. Rated for 300 volts and 90 degrees Celsius, this two-conductor cable meets Canadian electrical code requirements for residential and commercial construction. The 14 AWG copper conductors provide reliable power distribution for general-purpose circuits including lighting and receptacles. Suitable for dry locations in walls, ceilings, and attics.

NMD90 14/2 AWG electrical cable in a 20-metre length for residential and light commercial wiring. Rated at 300 volts with 90°C insulation, this two-conductor copper cable meets Canadian Electrical Code requirements for general branch circuit applications. The white outer jacket allows for easy identification during installation in walls, ceilings, and attics where permitted by local codes.

This 10-metre NMD90 14/2 AWG electrical cable is designed for residential and light commercial wiring applications. Rated at 300 volts with a 90°C temperature rating, this two-conductor copper cable meets Canadian Electrical Code requirements for interior branch circuit installations. The white outer jacket provides easy identification and the flexible construction allows for routing through studs, joists, and junction boxes in new construction or renovation projects.

NMD90 14/2 AWG electrical cable in 5-metre length for residential wiring applications. Rated at 300 volts and 90 degrees Celsius, this 2-conductor copper cable meets Canadian electrical code requirements. The white outer jacket provides easy identification in junction boxes. Suitable for general-purpose circuits including lighting, receptacles, and switches in dry interior locations.

NMD90 14/2 AWG electrical cable in a 50-metre length for residential and light commercial wiring. Rated for 300 volts and 90 degrees Celsius, this two-conductor copper cable meets Canadian electrical code requirements for general branch circuit installations. The white outer jacket allows for easy identification and routing through walls, ceilings, and attics in dry locations.

Flexible, resistant and easy to strip, this high quality MD90 electric cable is used for residential installations (dry areas) such as: electrical outlets, 3-way switches, lighting, etc.

NMD90 construction cable measuring 75 metres in length with 8 AWG gauge and 3 copper conductors. Rated for 90 degrees Celsius and 300 volts, this cable meets Canadian electrical code requirements for residential and commercial building wiring. The NMD-7 certified cable provides reliable power distribution for circuits requiring higher amperage capacity, including ranges, dryers, and subpanels.

NMD90 14-3 electrical cable in 150-metre length for residential and commercial wiring. This NMD-7 rated construction cable features three 14 AWG copper conductors with thermoplastic insulation rated to 90 degrees Celsius. Approved for 300-volt circuits in dry locations. Suitable for branch circuit wiring, outlets, switches, and lighting installations in walls, ceilings, and attics where permitted by electrical code.

NMD90 14-3 AWG electrical cable in a 75-metre length with white outer jacket. This NMD-7 rated construction cable features three copper conductors rated for 300 volts and temperatures up to 90 degrees Celsius. Suitable for residential and commercial branch circuit wiring including general lighting, receptacles, and small appliance circuits. Approved for dry locations and installation in wood or steel framing.

Flexible, resistant and easy to strip, this high quality MD90 electric cable is used for residential installations (dry areas) such as: electrical outlets, 3-way switches, lighting, etc.

NMD90 10-3 electrical cable in a 75-metre length for residential and commercial construction. This 10 AWG copper cable features three insulated conductors rated for 90°C and 300 volts. The orange jacket provides easy gauge identification on the job site. Approved for dry locations and suitable for branch circuits, receptacles, and general wiring applications where higher ampacity is required.

NMD90 electric cable measuring 75 metres in length with 6 AWG wire gauge and 3 copper conductors. Rated for 90 degrees Celsius and 300 volts, this NMD-7 type cable meets the requirements for residential and commercial building wiring. The white outer jacket allows for easy identification during installation. Suitable for permanent wiring in dry locations including branch circuits, feeders, and service entrance applications.

This 75-metre NMD90 construction cable features 12 AWG gauge with 3 conductors for residential and commercial wiring applications. Rated for 300 volts and temperatures up to 90 degrees Celsius, it meets Canadian electrical code requirements. The yellow jacket identifies the 12-gauge wire for easy circuit identification during installation. Suitable for general-purpose branch circuits including lighting and receptacle wiring in dry locations.

This 30-metre NMD90 construction cable features 14 AWG wire gauge with 3 conductors for standard residential circuits. Rated to 90 degrees Celsius and 300 volts, the NMD-7 approved cable meets Canadian electrical code requirements. The white jacket allows easy identification during installation. Suitable for general wiring in dry locations including lighting circuits, outlets, and switch runs in walls, ceilings, and attics.

NMD90 electrical cable measuring 20 metres in length with 14 AWG gauge and 3 copper conductors. Rated for 90 degrees Celsius and 300 volts, this NMD-7 type cable meets Canadian electrical code requirements for residential and light commercial construction. The white outer jacket provides easy identification during installation. Suitable for branch circuits, general wiring, and interior building applications where dry location installation is required.

NMD90 14-3 electrical cable in a 10-metre length for residential and light commercial wiring. This 14 AWG copper cable features three conductors and is rated for 300 volts with a 90°C temperature tolerance. Suitable for general-purpose branch circuits including lighting, receptacles, and small appliance connections. Meets Canadian Electrical Code requirements for dry location installations.

NMD90 14-3 electrical cable in 5-metre length for residential and light commercial wiring. This 14 AWG, 3-conductor cable is rated for 300 volts and operates safely up to 90 degrees Celsius. Meets NMD-7 construction standards for indoor installations. Suitable for general-purpose branch circuits including lighting, receptacles, and switch loops requiring a ground wire.

The NMD90 12/2 gauge indoor electrical wire – 300 V 20 A, CSA certified, is composed of two sheathed copper conductors and a bare copper grounding wire. Designed for lighting circuits or electrical outlets, it meets standard electrical load requirements in rooms such as bedrooms, living rooms, or hallways. This wire is ideal for residential environments requiring reliable and safe power supply for appliances like air conditioners or kitchen devices.

This construction wire is used for residential installation in dry places, such as for an electric range connection.

This NMD90 10/3 electrical cable is designed for indoor residential and commercial wiring. Suitable for 30 A circuits up to 300 V, it features three insulated copper conductors plus one bare grounding wire. The orange jacket is impact-resistant and provides quick circuit identification. Offering excellent conductivity and flexibility, this CSA-certified cable ensures safe and compliant electrical installations, ideal for wiring high-intensity appliances or renovation projects.

This high quality MNWV electric cable is used for underground installations, including direct burial in the ground (dry or wet areas where there is no risk of mechanical damage).

This cable is suitable for use as feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.

This AC-90 armoured aluminum cable #14-2 x 75 m is suitable for use as feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.

This AC-90 armoured aluminum cable #12-3 x 75 m is suitable for use as feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.

This AC-90 armoured aluminum cable #12-2 x 75 m is suitable for use as feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.

This AC-90 armoured aluminum cable #14-3 x 75 m is suitable for use as feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.

This high quality MNWV electric cable is used for underground installations, including direct burial in the ground (dry or wet areas where there is no risk of mechanical damage).

This high quality MNWV electric cable is used for underground installations, including direct burial in the ground (dry or wet areas where there is no risk of mechanical damage).

This high quality MNWV electric cable is used for underground installations, including direct burial in the ground (dry or wet areas where there is no risk of mechanical damage).

This high quality MNWV electric cable is used for underground installations, including direct burial in the ground (dry or wet areas where there is no risk of mechanical damage).

This high quality MNWV electric cable is used for underground installations, including direct burial in the ground (dry or wet areas where there is no risk of mechanical damage).

This high quality MNWV electric cable is used for underground installations, including direct burial in the ground (dry or wet areas where there is no risk of mechanical damage).

This high quality MNWV electric cable is used for underground installations, including direct burial in the ground (dry or wet areas where there is no risk of mechanical damage).