Wood fiber siding

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

Built for exterior siding systems, this D-5 joint creates a clean transition between panels in a matte charcoal finish. The long, narrow rectangular strip has straight edges and squared corners for tidy alignment. A slight center fold and subtle, irregular horizontal striations support visual continuity, with uniform color across surfaces. One end includes a small circular hole and the opposite end features a curled lip to aid positioning. Planning is simple, with coverage of approximately 65 pieces per 1,000 sq.ft. Suitable for professional installs and DIY upgrades.

Made for D-5 profile siding, this joint strip aligns panels cleanly and creates a uniform transition across exterior elevations. The long, narrow plastic piece features a matte light gray finish that blends with contemporary cladding. For precise placement, it includes a small round hole at one end and a folded lip at the other, with subtle embossed markings along the length to guide positioning. Planning is straightforward, with about 65 pieces used per 1,000 sq.ft. Suitable for professional and DIY projects, it supports installation or replacement of siding sections with consistent results.

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows.

Finish exterior siding terminations with this 1/2" x 10' J-channel in a charcoal matte woodgrain finish. The embossed texture coordinates with wood fibre siding and keeps edges around corners, openings, and cut ends neat and consistent. A hemmed inner return supports clean lines, while the two-tone design—charcoal exterior with white interior—blends discreetly with dark facades. Supplied as straight stock with a square-cut end, the long 10' length helps reduce joints and speeds layout for renovations or new construction. Practical for DIY users and contractors alike. Compatible with CanExel Ridgewood and Ultraplank.

Finish panel edges cleanly on exterior siding with this 1/2" J-trim in a 10' length. Designed for wood fibre siding, it features a classic J-channel profile with a return lip and an open slot to guide panels and conceal cut edges. Straight-cut ends help create tidy joins on continuous runs. The smooth surface provides a discreet, consistent look, and there are no perforations visible. Suitable for new installations or replacements, it supports dependable results for DIY users and trades. Fits 1/2" siding panels and helps complete terminations at perimeters and field cuts.

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ridgewood D-5 or Ultraplank siding to frame your doors and windows. ** Please note that this product may not be available individually from your store. **

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Finish exterior siding edges and terminations with this 1" x 10' J-trim. The long, straight strip uses a J-channel profile with an opening along one edge and a hemmed lip on the short flange for a clean fit against panels. Its charcoal exterior has a matte, linear-grain appearance, while the concealed side is white with a smooth, glossy finish. Sized for wood fibre siding, it helps keep lines uniform around openings and along transitions. The 10' length spans long runs, reducing joints and jobsite cuts for a consistent, tidy result. Compatible with CanExel CED'R-Vue.

This 1" J-trim creates a clean receiving channel for finishing panel edges and transitions on exterior siding. The 10 ft length supports continuous runs with fewer visible joints, while the smooth low-sheen Tundra finish delivers a uniform exterior appearance. Precisely formed bends, straight edges, and square-cut ends help maintain alignment and simplify installation. Designed for wood fiber siding systems, it provides clean, consistent contours for both new construction and renovation projects.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.