Gutters and accessories

Mulco's gutter sealant waterproofs gutter joints and drain pipes.

Mulco's gutter sealant waterproofs gutter joints and drain pipes.

This type B vinyl eavestrough elbow deflects the downspout to prevent damage to the foundation. It tilts the downspout sideways. Made of vinyl treated with an anti-UV agent, it resists snow, ice, salt, wind and extreme temperatures without rusting, denting, leaking or breaking.

This square elbow for vinyl gutters is used to change the direction of water flow. It is resistant to ice and snow, salty air, desert heat and heating cables. It is easy to install, lightweight and requires no maintenance.

This square connector is used to connect two downpipe sections. It is resistant to ice and snow, salt air, desert heat and heating cables. It is equipped with an interlocking system that makes installation quick, clean and simple, without the use of glue.

This gutter connection allows two gutter sections to be connected. It is resistant to ice and snow, salt air, desert heat and heating cables. It is equipped with an interlocking system that makes installation quick, clean and simple, without the use of glue.

This vinyl gutter end cap provides a perfect seal. Its snap-on fastening system makes installation quick, clean and easy and no glue or caulking is required. It resists snow, ice, salt, wind and heat without rusting, denting, chipping or loosening.

This vinyl gutter end connector diverts rainwater from your roof away from your home so that it can safely drain away. Its interlocking system makes installation quick, clean and simple. Made of vinyl treated with an anti-UV agent, it withstands extreme temperatures without rusting, denting, leaking or breaking.

This contemporary vinyl 90 degree corner is used to change the direction of water flow along the gutter without sealing or caulking. It is resistant to ice and snow, salt air, desert heat and heating cables.

This eavestrough guard is designed to handle a large volume of water and resist heat and cold better than vinyl eavestrough guards. Its fine mesh blocks small debris. Durable powder-coated paint prevents rust from forming for greater durability. Blends in with the roofline for reduced visibility.

This low profile drain pan allows you to move rainwater away from your home with the appearance of a buried drainage system at no cost. The low profile design creates a discreet appearance and can be covered with mulch, straw or stones for a subtle look without digging. It is easy to install, no downspout connection is required.

Use these Gutter Joiners with SeamerMate™ Sealant to create strong, seamless connections in your gutter system. These aluminum gutter joiners are ideal for linking gutter sections, miters or end drops with ease. Crafted from durable aluminum in a versatile white colour to complement most exteriors, each pack includes two joiners and a 1 oz. tube of sealant for a secure, leak-proof fit. 

Use these Gutter Joiners with SeamerMate™ Sealant to create strong, seamless connections in your gutter system. These aluminum gutter joiners are ideal for linking gutter sections, miters or end drops with ease. Crafted from durable aluminum in a versatile white colour to complement most exteriors, each pack includes two joiners and a 1 oz. tube of sealant for a secure, leak-proof fit.

Use these Gutter Joiners with SeamerMate™ Sealant to create strong, seamless connections in your gutter system. These aluminum gutter joiners are ideal for linking gutter sections, miters or end drops with ease. Crafted from durable aluminum in a versatile black colour to complement most exteriors, each pack includes two joiners and a 1 oz. tube of sealant for a secure, leak-proof fit. 

Designed to guide rainwater away from walls and foundations, this aluminum downspout elbow ensures effective protection for your home. Its durable aluminum construction guarantees long-lasting use, while its resistant finish harmonizes perfectly with aluminum downspouts. Versatile and easy to install, it can be placed at the top or bottom of the downspout and securely fastened with pop rivets or screws (not included), providing optimal performance.

This aluminum downspout elbow is designed to effectively divert rainwater away from your home's walls and foundations. Its sturdy aluminum construction provides enhanced resistance and extended durability. Compatible with aluminum downspouts, it can be installed either at the top or bottom of the downspout. For a reliable installation, use screws or pop rivets (not included) to securely fasten it, ensuring optimal performance.

This 5-inch aluminum gutter end piece efficiently connects gutters to downspouts and elbows. Made from sturdy, corrosion-resistant aluminum, it ensures a durable installation that withstands harsh weather conditions. Its white finish blends seamlessly with the exterior of the house for a clean and polished look. For optimal sealing, it is recommended to use screws or rivets (not included) and apply a joint sealant (not included).

This aluminum downspout strap is ideal for ensuring a sturdy and durable attachment of 2 x 3-inch downspouts. Made of aluminum, it features a white finish that perfectly complements your exterior while effectively protecting against the elements. Easy to install, it securely fastens to the wall using screws or nails (not included). For optimal performance, it is recommended to use two straps per 10-foot section of downspout.

This aluminum downspout extension is designed to easily connect a downspout to an elbow, bridging the gap between the overhang and the wall. Featuring a durable black enamel finish, it effectively helps protect foundations and basements from moisture. Its sturdy aluminum construction ensures long-lasting use, while the crimped end allows for quick and secure attachment. Ideal for situations requiring a short extension, it is perfectly compatible with 2" x 3" downspouts and elbows.

This aluminum downspout elbow is ideal for redirecting rainwater away from walls and foundations, providing durable protection for your home. Made from sturdy aluminum, it ensures reliable performance and long-lasting durability. Its robust finish fits perfectly with aluminum downspouts. Easy to install, it can be positioned at the top or bottom of the downspout and secured using pop rivets or screws (not included), ensuring an effective connection.

This aluminum downspout elbow is designed to direct rainwater away from walls and foundations, effectively protecting your home. Its durable aluminum construction ensures long-lasting performance, while its resistant finish blends seamlessly with aluminum downspouts. Versatile, it can be installed at the top or bottom of the downspout. For a secure fit, use pop rivets or screws (not included), ensuring a solid and effective installation.

This 5-inch aluminum end cap is designed to connect 5-inch aluminum gutters to downspouts and elbows. Its durable aluminum construction ensures long-lasting performance, while its black finish seamlessly blends with your home's exterior aesthetic. For effective installation, use screws or rivets (not included) and apply a sealant and SeamerMate (not included) to ensure a strong and leak-proof connection.

These 5-inch aluminum end caps are designed to efficiently seal aluminum gutters and prevent water leaks. Their robust construction, combined with a durable finish, ensures reliable protection and long-lasting performance. Installation is straightforward: simply apply a gutter sealant (not included) before securing them in place. These caps offer a practical solution to enhance the performance and durability of your gutter system.

These 5-inch aluminum end caps provide a simple and effective solution for sealing the ends of aluminum gutters. Their sturdy design and durable finish protect against water leaks, ensuring long-lasting performance. Easy to install, they only require the application of a gutter sealant (not included) before attachment. These end caps are an ideal choice to maintain the integrity of your drainage system while preserving its efficiency.

The interior corner makes it easy to turn the corner of the roof and connect the two sections of gutters together. They are made of prepainted galvalume, they are efficient and easy to install.

The interior corner makes it easy to turn the corner of the roof and connect the two sections of gutters together. They are made of prepainted galvalume, they are efficient and easy to install.

The interior corner makes it easy to turn the corner of the roof and connect the two sections of gutters together. They are made of prepainted galvalume, they are efficient and easy to install.

HI-BAK downspouts are made from prepainted galvalume. They are rigid and weather-resistant, with a bar staple on the back. They are of incomparable strength, ideal for the Canadian climate.

HI-BAK downspouts are made from prepainted galvalume. They are rigid and weather-resistant, with a bar staple on the back. They are of incomparable strength, ideal for the Canadian climate.

The prepainted galvalume caps are used at the end of your HI-BAK gutters. They are pre-drilled to facilitate the insertion of screws.

The prepainted galvalume caps are used at the end of your HI-BAK gutters. They are pre-drilled to facilitate the insertion of screws.

The prepainted galvalume caps are used at the end of your HI-BAK gutters. They are pre-drilled to facilitate the insertion of screws.

Equip your home with this down-spout adapter to create an efficient water recovery system.

Equip your home with this down-spout adapter to create an efficient water recovery system.

Equip your home with this down-spout adapter to create an efficient water recovery system.

The downspout connector is used to connect the downspout to the gutter. It fits easily into it and does not require the installation of a double slide seal.

The downspout connector is used to connect the downspout to the gutter. It fits easily into it and does not require the installation of a double slide seal.

The elbow is typically used to connect your downspout to your gutter and may require additional extension depending on the distance between your eave and the wall of your home. Different types of elbows (A or B) can be used depending on your installation or the style of your home.

The elbow is typically used to connect your downspout to your gutter and may require additional extension depending on the distance between your eave and the wall of your home. Different types of elbows (A or B) can be used depending on your installation or the style of your home.

The 18 inch extension pipe is typically used between the gutter and the eaves to connect 2 elbows or to complete a downspout.

The 18 inch extension pipe is typically used between the gutter and the eaves to connect 2 elbows or to complete a downspout.

This roof edge adapter is used when the rafter is exposed to the outside or when the edge is not perpendicular to the ground. It is resistant to ice and snow, salty air, desert heat and heating cables. It is easy to install, lightweight and requires no maintenance.

This vinyl square downspout diverter is easy to install on the elbow at the bottom of your downspout. Made of UV-stabilized vinyl resin, it can withstand snow, ice, salt, wind and extreme temperatures without rusting, denting, leaking or crashing.

This vinyl gutter downspout resists and deflects rain from your roof. Made of vinyl resin treated with an anti-UV agent, this pipe resists snow, ice, salt, wind and extreme temperatures without rusting, leaking, denting or chipping.

This vinyl square downspout diverter is easy to install on the elbow at the bottom of your downspout. Made of UV-stabilized vinyl resin, it can withstand snow, ice, salt, wind and extreme temperatures without rusting, denting, leaking or crashing.

This vinyl gutter downspout resists and deflects rain from your roof. Made of vinyl resin treated with an anti-UV agent, this pipe resists snow, ice, salt, wind and extreme temperatures without rusting, leaking, denting or chipping.

This non-visible vinyl gutter hook is easy to install. It is mounted under the eavestrough to securely attach it to your property. Made of high quality vinyl, it can withstand snow, ice, salt, wind and heat without rusting, denting or chipping.

This expandable cover helps prevent clogging of downspouts and drainage pipes. It is suitable for square and round chutes. It is lightweight, durable, easy to install and handle.