Exterior siding

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These interior corners are suitable for 3 CanExel exterior cladding models: Ced'R-Vue, Ridgewood D-5 and Ultraplank.

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

Built for exterior siding systems, this D-5 joint creates a clean transition between panels in a matte charcoal finish. The long, narrow rectangular strip has straight edges and squared corners for tidy alignment. A slight center fold and subtle, irregular horizontal striations support visual continuity, with uniform color across surfaces. One end includes a small circular hole and the opposite end features a curled lip to aid positioning. Planning is simple, with coverage of approximately 65 pieces per 1,000 sq.ft. Suitable for professional installs and DIY upgrades. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

Made for D-5 profile siding, this joint strip aligns panels cleanly and creates a uniform transition across exterior elevations. The long, narrow plastic piece features a matte light gray finish that blends with contemporary cladding. For precise placement, it includes a small round hole at one end and a folded lip at the other, with subtle embossed markings along the length to guide positioning. Planning is straightforward, with about 65 pieces used per 1,000 sq.ft. Suitable for professional and DIY projects, it supports installation or replacement of siding sections with consistent results. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

These joints make it possible to make the butts between two planks of horizontal clapboard, while maintaining an adequate space of dilation. **The displayed price corresponds to one unit only. Please note that this product is generally sold by the box at your merchant and may not be available individually.**

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Finish exterior siding edges and terminations with this 1" x 10' J-trim. The long, straight strip uses a J-channel profile with an opening along one edge and a hemmed lip on the short flange for a clean fit against panels. Its charcoal exterior has a matte, linear-grain appearance, while the concealed side is white with a smooth, glossy finish. Sized for wood fibre siding, it helps keep lines uniform around openings and along transitions. The 10' length spans long runs, reducing joints and jobsite cuts for a consistent, tidy result. Compatible with CanExel CED'R-Vue.

This 1" J-trim creates a clean receiving channel for finishing panel edges and transitions on exterior siding. The 10 ft length supports continuous runs with fewer visible joints, while the smooth low-sheen Tundra finish delivers a uniform exterior appearance. Precisely formed bends, straight edges, and square-cut ends help maintain alignment and simplify installation. Designed for wood fiber siding systems, it provides clean, consistent contours for both new construction and renovation projects.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

Use these J-shaped moldings to match your Ced'R-Vue siding to frame your doors and windows.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This 10' drip edge is designed for exterior siding transitions, directing water away from cladding and trim to limit streaking and moisture at horizontal joints. Formed from coated sheet metal, it uses a right‑angle profile with two flanges and a hemmed drip edge for clean runoff and a neat line along facades. The matte charcoal finish with a subtle woodgrain texture blends with modern elevations and wood fibre siding. Supplied without pre‑punched holes, it installs in continuous runs with on‑site fastening for new builds, repairs, and upgrades.

Finish exterior siding cleanly with this 10' drip cap in sheet metal. Its folded V-profile and hemmed downturned lip steer water away from panels, while a smooth semi-gloss Tundra tone pairs with wood fibre siding. The 120" linear length helps minimize visible seams on long runs and integrates easily into trim layouts. With no visible perforations and an angled cut for precise fitting, it delivers a neat, consistent line at edges and joints. A practical choice for residential builds, updates, and capable DIY maintenance projects.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

This drip cap directs flow of rainwater away from roofs, decks and other surfaces.

Install CanExcel siding in your home with these twisted nails of appropriate color and length.