Drywall

These gypsum panels provide increased resistance to surface abrasion, indentation, and impact. Featuring a non-combustible gypsum core that resists moisture and mould, the surface paper is folded over the long edges to reinforce and protect the core. The long edges are also tapered to conceal joints using Sheetrock or Synko joint compounds. Meeting or exceeding the specifications of ASTM D3273 and ASTM C1396 standards, they are UL-rated for fire resistance and can be used in all UL and ULC constructions.

With high resistance to shocks, impacts, and abrasion, this AR gypsum panel also offers protection against mould. Its fire-resistant core ensures enhanced safety, and its compliance with the latest standards makes it an ideal choice for any construction or renovation project.

This ultralight SHEETROCK® gypsum panel simplifies construction and renovation projects. With tapered edges for clean joints, it speeds up finishing and delivers a smooth result. The non-combustible core and 100% recycled paper facing make it an environmentally responsible option for indoor wall and ceiling installations. GREENGUARD Gold certified for low VOC emissions, it’s a great fit for homes, condos, or multi-unit buildings.

Gyplap Treated-Core Gypsum Sheathing is a weather and fire-resistant panel designed to combine excellent performance with exceptional economy. It is used in wood and light steel frame construction under many exterior finishes, such as masonry veneer, wood, and composite siding. Its non combustible gypsum core adds fire safety not available with plywood or wood-fibre sheathing. Gyplap Treated Core Gypsum Sheathing has a water-resistant core treatment that is clad in water repellent paper on the face and back surfaces.

Gyplap Treated-Core Gypsum Sheathing is a weather and fire-resistant panel designed to combine excellent performance with exceptional economy. It is used in wood and light steel frame construction under many exterior finishes, such as masonry veneer, wood, and composite siding. Its non combustible gypsum core adds fire safety not available with plywood or wood-fibre sheathing. Gyplap Treated Core Gypsum Sheathing has a water-resistant core treatment that is clad in water repellent paper on the face and back surfaces.

Gyplap Treated-Core Gypsum Sheathing is a weather and fire-resistant panel designed to combine excellent performance with exceptional economy. It is used in wood and light steel frame construction under many exterior finishes, such as masonry veneer, wood, and composite siding. Its non combustible gypsum core adds fire safety not available with plywood or wood-fibre sheathing. Gyplap Treated Core Gypsum Sheathing has a water-resistant core treatment that is clad in water repellent paper on the face and back surfaces.

Sheetrock Brand UltraLight Panels Firecode X (UL Type ULIX) are the industry's first and lightest Type X gypsum panel. These panels have been formulated to achieve all of the strength and performance characteristics as standard 15.9 mm (5/8 in.) Sheetrock® Brand Firecode® Type X Gypsum Panels at a significantly reduced weight. The panels are cUL Classified for fire resistance and can be used in the most widely specified UL fire-resistance-rated wall, column, floor-ceiling and roof-ceiling assemblies where Type X or Type C panels are required. The long edges of the panels are tapered, allowing joints to be reinforced and concealed with CGC Sheetrock® or Synko® Brand joint treatment systems. On the face along the long edge of each panel, the UL Type Designation, ULIX, is printed for easy identification by building inspectors.

Sheetrock Brand UltraLight Panels Firecode X (UL Type ULIX) are the industry's first and lightest Type X gypsum panel. These panels have been formulated to achieve all of the strength and performance characteristics as standard 15.9 mm (5/8 in.) Sheetrock® Brand Firecode® Type X Gypsum Panels at a significantly reduced weight. The panels are cUL Classified for fire resistance and can be used in the most widely specified UL fire-resistance-rated wall, column, floor-ceiling and roof-ceiling assemblies where Type X or Type C panels are required. The long edges of the panels are tapered, allowing joints to be reinforced and concealed with CGC Sheetrock® or Synko® Brand joint treatment systems. On the face along the long edge of each panel, the UL Type Designation, ULIX, is printed for easy identification by building inspectors.

Sheetrock Brand UltraLight Panels Firecode X (UL Type ULIX) are the industry's first and lightest Type X gypsum panel. These panels have been formulated to achieve all of the strength and performance characteristics as standard 15.9 mm (5/8 in.) Sheetrock® Brand Firecode® Type X Gypsum Panels at a significantly reduced weight. The panels are cUL Classified for fire resistance and can be used in the most widely specified UL fire-resistance-rated wall, column, floor-ceiling and roof-ceiling assemblies where Type X or Type C panels are required. The long edges of the panels are tapered, allowing joints to be reinforced and concealed with CGC Sheetrock® or Synko® Brand joint treatment systems. On the face along the long edge of each panel, the UL Type Designation, ULIX, is printed for easy identification by building inspectors.

Sheetrock Brand UltraLight Panels Firecode X (UL Type ULIX) are the industry's first and lightest Type X gypsum panel. These panels have been formulated to achieve all of the strength and performance characteristics as standard 15.9 mm (5/8 in.) Sheetrock® Brand Firecode® Type X Gypsum Panels at a significantly reduced weight. The panels are cUL Classified for fire resistance and can be used in the most widely specified UL fire-resistance-rated wall, column, floor-ceiling and roof-ceiling assemblies where Type X or Type C panels are required. The long edges of the panels are tapered, allowing joints to be reinforced and concealed with CGC Sheetrock® or Synko® Brand joint treatment systems. On the face along the long edge of each panel, the UL Type Designation, ULIX, is printed for easy identification by building inspectors.

Sheetrock Brand UltraLight Panels Firecode X (UL Type ULIX) are the industry's first and lightest Type X gypsum panel. These panels have been formulated to achieve all of the strength and performance characteristics as standard 15.9 mm (5/8 in.) Sheetrock® Brand Firecode® Type X Gypsum Panels at a significantly reduced weight. The panels are cUL Classified for fire resistance and can be used in the most widely specified UL fire-resistance-rated wall, column, floor-ceiling and roof-ceiling assemblies where Type X or Type C panels are required. The long edges of the panels are tapered, allowing joints to be reinforced and concealed with CGC Sheetrock® or Synko® Brand joint treatment systems. On the face along the long edge of each panel, the UL Type Designation, ULIX, is printed for easy identification by building inspectors.

Durock Brand Glass-Mat Tile Backerboard is a 12.7 mm (1/2 in.) or 15.9 mm (5/8 in.) water-resistant, easy to use panel for walls, floors, and ceilings. Durock Brand Glass-Mat Tile Backerboard consists of a treated water-resistant gypsum core that is covered with a coated fiberglass mat facer and back and has a proprietary surface making it ideal for use in wet areas as a tile substrate.

Durock Brand Glass-Mat Tile Backerboard is a 12.7 mm (1/2 in.) or 15.9 mm (5/8 in.) water-resistant, easy to use panel for walls, floors, and ceilings. Durock Brand Glass-Mat Tile Backerboard consists of a treated water-resistant gypsum core that is covered with a coated fiberglass mat facer and back and has a proprietary surface making it ideal for use in wet areas as a tile substrate.

Durock Brand Glass-Mat Tile Backerboard is a 12.7 mm (1/2 in.) or 15.9 mm (5/8 in.) water-resistant, easy to use panel for walls, floors, and ceilings. Durock Brand Glass-Mat Tile Backerboard consists of a treated water-resistant gypsum core that is covered with a coated fiberglass mat facer and back and has a proprietary surface making it ideal for use in wet areas as a tile substrate.

Durock Brand Glass-Mat Tile Backerboard is a 12.7 mm (1/2 in.) or 15.9 mm (5/8 in.) water-resistant, easy to use panel for walls, floors, and ceilings. Durock Brand Glass-Mat Tile Backerboard consists of a treated water-resistant gypsum core that is covered with a coated fiberglass mat facer and back and has a proprietary surface making it ideal for use in wet areas as a tile substrate.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Erect wall divisions with this steel stud.

Easily apply this lightweight compound for drywall.

This lightweight all-purpose joint compound comes ready-mixed for immediate use on drywall finishing projects. The formula applies smoothly and sands easily, making it well suited for taping, filling, and finish coating applications. Low shrinkage during drying reduces the need for additional coats, saving valuable time across multi-step finishing work. Compatible with both paper and fiberglass mesh tape, this versatile compound effectively handles joints, corners, fastener heads, and trim details on drywall in new construction and renovation projects.

Easily apply this lightweight compound for drywall.

Choose the efficiency and simplicity of a good sanding with the drywall compound.

Choose the efficiency and simplicity of a good sanding with the drywall compound.

Choose the efficiency and simplicity of a good sanding with the drywall compound.

Choose the efficiency and simplicity of a good sanding with the drywall compound.

Choose the efficiency and simplicity of a good sanding with the drywall compound.

Thanks to this drywall compound, sanding dust falls straight to the floor for a faster and easier clean-up.

Thanks to this drywall compound, sanding dust falls straight to the floor for a faster and easier clean-up.

Add these steel rails to your drywall framing system.

Thanks to this drywall compound, sanding dust falls straight to the floor for a faster and easier clean-up.

The CGC Pre-Mixed Dust Control Joint Compound minimizes airborne dust during sanding. Its special formula causes dust particles to clump together and fall directly to the floor, making cleanup easier and improving air quality. Lightweight and all-purpose, it provides smooth application and easy sanding for flawless finishes.

Thanks to this drywall compound, sanding dust falls straight to the floor for a faster and easier clean-up.

Add these steel rails to your drywall framing system.

Add these steel rails to your drywall framing system.

Add these steel rails to your drywall framing system.

CGC Sheetrock Total Drywall Compound weighs up to 35% less than conventional drywall ready-mixed compounds and boasts superior handling and ease of use attributes, allowing you to complete the job at a faster pace.

CGC Sheetrock Total Drywall Compound weighs up to 35% less than conventional drywall ready-mixed compounds and boasts superior handling and ease of use attributes, allowing you to complete the job at a faster pace.

The all-purpose lightweight joint compound is ready to use. Easy to apply and sand, it is suitable for taping, filling, and finishing. Its low shrinkage during drying provides several advantages such as faster finishing, reduced risk of cracks, and fewer layers needed to fill joints.

For a quality finish on your drywall, opt for this tape.