Mainline and branch tubing

Make your life easier with this indispensable and ultra-rugged tool for moving guy wires on the tree.

These light and sturdy pliers that will allow you long sugar bush tubing installation days.

This heavy-duty, lightweight multi-purpose hammer is perfect for pulling out torches.

Build strong fences by using this contractor tensioning tool.

Join two 9 or 10 gauge wires with this twister wire.

Integrate this semi-rigid tubing in your gravity system.

Get this Pruno horizontal spooler to hand your tubing.

Install your maple sap network with this rapitube mainline.

Install your maple sap network with this rapitube mainline.

Use this repair wire in your sugarbush system.

Use this tubing cutter when installing your maple sap harvest system.

Complete your sugarbush installation with this semi-rigid tubing.

The lightest and most economical installation clamp for repair and installation.

Install your drop lines spout, fitting, manifolds, etc. with these mini pliers.

Reduce the required efforts necessary for the installation and repair of tubing fittings with this lightweight and simple tool.

Make wires go through this joiner to extend their total length. ** Please note that this product may not be available individually from your store. **

Make wires go through this joiner to extend their total length. ** Please note that this product may not be available individually from your store. **

Make wires go through this joiner to extend their total length. ** Please note that this product may not be available individually from your store. **

Make wires go through this joiner to extend their total length. ** Please note that this product may not be available individually from your store. **

Easily remove spouts at the end of the season with this lightweight and sturdy tool.

Get this Pruno Deluxe tubing tool for your agricultural works.

Properly install your mainline with these Pruno pliers.

Properly install your mainline with these Pruno pliers.

Properly install your mainline with these Pruno pliers.

Properly install your mainline with these Pruno pliers.

Equip yourself with this Pruno wire tightener with spring for installing or repairing wires.

Equip yourself with this tension apparel to bring closer the tube's ends and maintain its place for easy repairs.

Get this Pruno winding tip hexagon socket 1 1/4 in for electric screwdriver and battery drill.

Get this soft and confortable adjustable strap for wearing tools on neck or shoulder.

Get this Pruno mini installation tubing tol with knife to repair and install multi fittings.

Get this Pruno hole punch for a superior drilling quality of the mainline.

Get yourself this Pruno flaring cone to spread the mainline and to ease the implantation of the multi fittings.

Get this Pruno compact insertion pliers with Vise-Grip and lateral knife.

Get this professional grade Pruno compact insertion pliers with lateral knife.

Get this level support to adjust the slope of your master line.

Replace your defective T-selle by this cap.

Attach this steel wire tension grip to an object and then pull the mainline through.

Attach this steel wire tension grip to an object and then pull the mainline through.

Attach this steel wire tension grip to an object and then pull the mainline through.

Maintain a tension between pipes to keep them at a good level in order to ease the flow of maple sap.

Tighten the fasteners to hold the main line on the wire thanks to this automatic twister.

Set up the main line with this indispensable manual twisting tie tool.

Use this spout remover when unraveling your maple trees.

Replacement side blade designed for PRUNO pliers. This blade fits PRUNO compact insertion pliers (models 71050, 71055, 71065, 71067, 710501, 710551, 710651, 710671) and PRUNO stripper pliers (models 71200, 71205, 71210). Installation requires two screws, sold separately under part number 71569. A direct replacement to restore cutting performance on compatible PRUNO tools used in electrical and low-voltage wiring applications.

Replacement spring designed for 5WR locking pliers. This spring restores proper jaw tension and return action, ensuring the pliers function as intended. A direct-fit replacement part that installs without tools or modifications. Essential for maintaining plier performance during tubing work, clamping tasks, and general repairs where consistent grip pressure is required.

The Pro-Tech Pull spout remover is engineered for maple syrup harvesting. It features a dual rocking fork mechanism that removes spouts while minimizing bark damage around tap holes. The steel head and aluminum handle provide durability with lightweight handling. Compatible with virtually all spout types and sizes, this tool delivers efficient extraction with reduced strain during seasonal tapping operations.

Compact insertion pliers for 5/16" fittings, model 71050. Lightweight construction with side knife, ice breaker, and PVC-coated handles. Designed for one-sided fitting insertion in maple tubing systems. Features carabiner/cord eyelet for transport. Suitable for installation and repair applications in maple syrup production.

Lightweight 3/16" installation pliers weighing 2.1 lb with screw-adjustable jaw pressure. Features two integrated Vise-Grip 4WR pliers for fitting insertions during tubing installation and repair. Polyethylene-coated handles provide durability and comfortable grip. Compact design delivers full functionality in a lighter format, suited for installers working with PEX and similar tubing systems.