Agricultural machinery

Auto darkening welding helmet. Variable shade from 9 to 13. Switching speed of 1/25,000 seconds. Adjustable sensitivity and delay. Solar powered no batteries required. Fully automatic.

Lincoln Electric Cut Welder Kit contains the base oxy-acetylene quality equipment needed for cutting, welding, and brazing in a rugged ballistic nylon bag.

This Lincoln Electric Straight-Head Chipping Hammer can be used to remove slag from metal welds. The ergonomic handle has a spring-style grip to reduce shock and fatigue. This welding hammer is made of tough steel and has a tapered point on one end and a vertical chisel on the other.

# 1 select natural white soapstone pencil refill.

Ruggedly constructed flat steel soapstone holder comes with a channel case design and convenient spring pocket clip. Easily indexable and smooth operating, this holder is designed for one-handed operation.

Tempered steel bristle pattern for general cleaning on carbon steels.

Tightly braided rayon lines for strength, neoprene base for oil and flame resistance.

For plasma and oxyacetylene cutting operations. 100% surface seal keeps sparks, spatter, sand, dirt and heat away from your eyes. Comfortable to wear with a wide angle of view.

Single flint striker replacement silex flints, BMR code 002-0207 (KH570). Pack of 6.

Careful cleaning of welding tips assures best welding flame and longer tip life. Quickly eliminates scale and orifice distortion from tip.

Deep penetration. Low hydrogen, all purpose electrode. Excellent for tack and skip welds. Offers superior weld strength and appearance 5 kg (11 pound).

A mild steel, general purpose, all position electrode. Use AC or DC (straight or reverse polarity) welding current. Especially useful for welding where poor fit-up conditions (wide gaps) exist. Small sizes are well suited for welding thin materials where low heat input required. Use on light gauge metal sheet metal and duct work. For metal buildings and structures. 75-100 Amps. A great all-position electrode for low amperage welding on sheet metal, especially in applications where appearance is important. Designed for excellent performance with smaller AC welders with low open-circuit voltages and a perfect choice for jobs involving irregular or short welds that require a change in position.

A low hydrogen iron powder type electrode that produces x-ray quality welds in all positions. Works best on DC reverse polarity welding. Good for field erections and steel structures, frames, trailer hitches and chassis. Low hydrogen electrode for low, medium and high carbon steel.

A mild steel, general purpose, all position electrode. Use AC or DC (straight or reverse polarity) welding current. Especially useful for welding where poor fit-up conditions (wide gaps) exist. Small sizes are well suited for welding thin materials where low heat input required. Use on light gauge metal sheet metal and duct work. For metal buildings and structures. 75-100 Amps. A great all-position electrode for low amperage welding on sheet metal, especially in applications where appearance is important. Designed for excellent performance with smaller AC welders with low open-circuit voltages and a perfect choice for jobs involving irregular or short welds that require a change in position.

Ideal for both AC and DC currents. Penetrates deeply. Cools quickly, allowing welding in all positions. Leaves very few residues. Can be used for various tasks (regular or galvanized tanks, steel casting repair, machinery parts, construction, pressure pipes, etc.). Offers excellent arc stability and performance. An excellent stick electrode with the ability to start easily at low voltages. Designed for use with small welders. Works well on sheet metal, galvanized steel, and special coated steels. Has an easy-to-strike arc. Excellent for use on edge, corner, and butt joints.

A mild steel, all position iron powder electrode. Designed to increase deposition rates and welding speeds. Provides good arc stability, low spatter and produces medium to low penetration. Can be used on ac or dc (straight or reverse polarity) welding current. Smooth, fine-rippled bead appearance. High deposition rates for fast performance. Operators love this easy-to-use, all-position electrode. Choose Fleetweld 47 for sheet metal lap joints and fillet welds, general purpose plate welding and maintenance jobs. 1 pound (0.45 kg) tube.

A mild steel, general purpose, all position electrode. Use AC or DC (straight or reverse polarity) welding current. Especially useful for welding where poor fit-up conditions (wide gaps) exist. Small sizes are well suited for welding thin materials where low heat input required. Use on light gauge metal sheet metal and duct work. For metal buildings and structures. 75-100 Amps. A great all-position electrode for low amperage welding on sheet metal, especially in applications where appearance is important. Designed for excellent performance with smaller AC welders with low open-circuit voltages and a perfect choice for jobs involving irregular or short welds that require a change in position.

The Superarc L-56 MIG Wire is a premium copper coated MIG wire from Lincoln Electric. SuperArc L-56 tolerates metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust- free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 12.5 LB Spool.

The Superarc L-56 MIG Wire is a premium copper coated MIG wire from Lincoln Electric. SuperArc L-56 tolerates metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust- free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 12.5 LB Spool.

The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 11 lb spool.

The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 2 lb spool.

The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 2 lb spool.

The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 2 lb spool.

Has a low melting point and excellent fluidity. Ideal for 6000 series Aluminum base metals. This wire is suitable for sustained elevated temperature service. Less sensitive to cracking. 1 pound ( 0.45 kg) spool.

Has a low melting point and excellent fluidity. Ideal for 6000 series Aluminum base metals. This wire is suitable for sustained elevated temperature service. Less sensitive to cracking. 1 pound ( 0.45 kg) spool.

Offers excellent arc stability and performance. A great stick electrode with the ability to start easily on low voltages. Designed for use with small welders. Works well on sheet metal, galvanized and special coated steels. Has an easy to strike arc. Excellent for use on edge, corner and butt joints.

Ideal for removing and installing contact tips and nozzles. Use to draw and cut wire, handle hot material and clean MIG nozzles.

This multi-process welder is lightweight, portable, connects to 120V input power, and is an excellent choice for MIG, stick, flux-cored, or TIG welding. The intuitive user interface, easy setup, and full list of accessories allows for welding in no time. The base unit allows for wire feed and stick welding, while TIG welding and spool gun welding is possible with optional accessories.

Offering power and versatility at a low price, the Century Inverter 230 runs on 230 V of input power and has all the advantages of the 120 V model with the ability to penetrate deeper on single passes. Capable of welding unlimited thicknesses of mild steel with multiple passes.

The AC/DC 225/125 is the same proven design as the renowned AC-225 arc welder, but adds the smoother, more stable DC welding arc. This stick welder is ideal for farm, shop, and home use where improved arc welding performance is desired.

This lead-free petroleum-based plumbing flux is a paste, designed to clean metal surfaces for consistent solder flow. It provides a protective barrier against heat scale and re-oxidation.

Designed for electrical applications, electrical silver bearing rosin core solder is perfect for use on speaker wires, small motors and appliances and for general electronic repairs. The rosin-core base eliminates the need for flux. It has a melting temperature of 430°F.

Flux coating provides smooth arc transfer. Designed for joining stainless steel to mild or low alloy steel.

This clamping device holds and transfers the welding current to the stick electrode. This electrode holder is heat resistance and lightweight. Holders have a fiberglass handle and jaw and are insulated for safe operation. These electrode holders also have highly conductive copper tongs. 300 Amp capacity.

Electrode Holder is heat resistant and insulated for safety. It's rated for up to 400 Amps and welding rods are attached by twisting the bare metal end into the aperature at the tip of the holder. It is also equipped with a fiberglass handle.

Suitable for all farm and shop welders. # 2 cable capacity.

Get equipped with a hydrolic jack to do the maintenance of your vehicle.

Get equipped with a hydrolic jack to do the maintenance of your vehicle.

Get equipped with a hydrolic jack to do the maintenance of your vehicle.

Get equipped with a hydrolic jack to do the maintenance of your vehicle.

The Torin 20 ton hydraulic bottle jack features a superior quality steel frame with a safe ratcheting head and a high quality glide action pressure pump. This powerful jack makes big loads easy to lift and lifts to a maximum height of 11.5 inches. The serrated heat treated saddle provides a generous lifting and a secure grip and also includes heat treated extension screws. The wide, rugged base provides stability and strength. The critical stress points are reinforced for added durability and strength.

These zinc-plated compression springs absorb and store energy and also create resistance to pulling force. They provide resistance to a force or tensile load that is applied to the spring.

This hydraulic trolley jack, provides stability and strength. Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.

This hydraulic trolley jack, provides stability and strength. Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.

These zinc-plated extension springs absorb and store energy and also create resistance to pulling force. They provide resistance to a force or tensile load that is applied to the spring.

Use this commercial battery to replace yours.

Choose this commercial battery to replace yours.

Enhance your engine's performance with this 12 V commercial and farm battery.