This lead-free petroleum-based plumbing flux is a paste, designed to clean metal surfaces for consistent solder flow. It provides a protective barrier against heat scale and re-oxidation.
Designed for electrical applications, electrical silver bearing rosin core solder is perfect for use on speaker wires, small motors and appliances and for general electronic repairs. The rosin-core base eliminates the need for flux. It has a melting temperature of 430°F.
Shade #10 replacement lens for Lincoln Electric fixed shade helmet CK2800-1 (see BMR code 002-0243) & K2800-1. Durable polycarbonate lens is shatter resistant.
Clear replacement lens for Lincoln Electric fixed shade helmet CK2800-1 (see BMR code 002-0243) & K2800-1. Durable polycarbonate lens is shatter resistant. Protects the shaded glass filter lens from weld spatter.
Clear replacement lens for Lincoln Electric Auto-Darkening welding helmet part numbers- Fits K2799-1, K2933-1, K2934-1, K3063-1, CK3058, CK3060 and K3064-1.
Auto darkening welding helmet. Variable shade from 9 to 13. Switching speed of 1/25,000 seconds. Adjustable sensitivity and delay. Solar powered no batteries required. Fully automatic.
Electrode Holder is heat resistant and insulated for safety. It's rated for up to 400 Amps and welding rods are attached by twisting the bare metal end into the aperature at the tip of the holder. It is also equipped with a fiberglass handle.
This Lincoln Electric Straight-Head Chipping Hammer can be used to remove slag from metal welds. The ergonomic handle has a spring-style grip to reduce shock and fatigue. This welding hammer is made of tough steel and has a tapered point on one end and a vertical chisel on the other.
Ruggedly constructed flat steel soapstone holder comes with a channel case design and convenient spring pocket clip. Easily indexable and smooth operating, this holder is designed for one-handed operation.
This single flint striker ignites acetylene and propane torches with simple, manual operation. A rotating, wear-resistant file presents fresh striking surfaces to help maintain consistent performance over repeated use. The flint is replaceable to extend service life; use replacement flint code KH571. Purpose-built for starting torches in welding-related tasks, it provides a straightforward tool when a basic striker is preferred. With durable components and a familiar single-flint layout, it delivers dependable ignition without unnecessary complexity. Designed for repeated striking during routine setup work.
The S-6 MIG Welding Wire is a copper-coated MIG wire that is great for welding on metals with a medium to high presence of mill scale. For best performance use on clean, oil-free, and rust-free base material. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, and 100% carbon dioxide. Copper coating provides superior arc starting characteristics, for long contact tip life. Ideal for automotive, sheet metal and structural steel applications. 2 lb spool.
These hair pin clips are easy to fit and reusable. Their ends are precision-cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These hair pin clips are easy to fit and reusable. Their ends are precision-cut. Designed with a zinc-plated finish, they are durable and rust resistant.
The Lincoln Electric MAGNUM PRO flux-cored replacement nozzle is designed to protect the tip of the welding gun while welding with self-shielded flux-cored welding wire. Damaged or missing nozzles should be replaced immediately. For use with the Mig Pak 140 MP (K3821-1) and Mig Pak 180i MP DV (K5331-1) machines.
The Lincoln Electric MAGNUM PRO MIG replacement nozzle is used to protect the threads and openings of the gas diffuser/contact tip holder during the MIG welding process. The nozzle directs shielding gas around the tip and MIG wire to protect the weld puddle. Designed for welding with sheilding gas only. For use with the Mig Pak 140 MP (K3821-1) and Mig Pak 180i MP DV (K5331-1) machines.
The Lincoln Electric flux-cored replacement nozzle is designed to protect the tip of the welding gun while welding with self-shielded flux-cored welding wire. Damaged or missing nozzles should be replaced immediately. For use with the Mig Pak 140/180, Weld Pak 140/180HD, FC90 or Easy Mig 140/180 machines.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
The Lincoln Electric MIG replacement nozzle is used to protect the threads and openings of the gas diffuser/contact tip holder during the MIG welding process. The nozzle directs shielding gas around the tip and MIG wire to protect the weld puddle. Designed for welding with sheilding gas only. For use with the Mig Pak 140/180, Weld Pak 140/180HD or Easy Mig 140/180 machines.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
These internal spring pins are easy to fit and reusable. Their ends are precision cut. Designed with a zinc-plated finish, they are durable and rust resistant.
This hitch pin with steel handle is heavy duty, grade 5, for attaching heavy loads and its handle makes it easy to use. It is delivered with a spring pin.
This hitch pin with steel handle is heavy duty, grade 5, for attaching heavy loads and its handle makes it easy to use. It is delivered with a spring pin.