Agricultural building supplies

This double angle clamp is designed to secure round posts with a 102 mm (4") diameter at a 90-degree angle configuration, making it well suited for agricultural building applications such as feeding and watering aisles. Two galvanized steel bands each wrap fully around the post and are secured by a hex bolt and nut assembly on one side. A quick-release pin mechanism with a safety chain on the other side allows for fast, tool-free opening. Each mounting plate features two ground spikes for stable anchoring. Practical and robust, this clamp handles demanding farm environments reliably.

This triple clamp is designed to secure round posts with a 102 mm (4") diameter, making it well suited for agricultural building applications such as feeding and watering aisles. The galvanized steel band wraps fully around the post and is secured by a hex bolt and nut assembly on one side. A quick-release pin mechanism with a safety chain on the other side allows for fast, tool-free opening. The mounting plate features three ground spikes for stable anchoring on three sides. Practical and robust, this clamp handles demanding farm environments reliably.

This 20-inch wall fan with a 1/2 HP direct-drive motor delivers 4900 CFM, making it a practical choice for ventilating agricultural buildings. The Triac controller provides airflow control, while six plastic blades turn inside a round shroud fitted with a wire guard. The black housing mounts on a square flange for easy installation. The motor operates on 115/230 volts at 60 Hz and draws 5.2/2.6 amps. Model AGI-907 is CSA certified, and its straightforward design suits both professionals and DIY users alike.

This adjustable gate stopper is designed for use with adjustable cow passage gates in agricultural buildings. Made from galvanized steel, it features a flat mounting plate with four corner holes for secure wall or post attachment. A cylindrical pivot socket at the centre receives and stops the gate rod precisely. Suitable for dairy and beef cattle operations, it provides reliable and repeatable gate positioning in feeding and watering aisles, reducing wear on gate hardware over time.

This 18" wall fan is built for agricultural building ventilation, moving air with a 1/3 HP motor rated at 3380 CFM. Six plastic blades turn on a direct-drive system, paired with a Triac controller. It operates on 115/230 volts at 60 Hz, drawing 3.6/1.8 amps. The black housing is fitted with a wire guard at the outlet and a mounting flange for wall installation. Installation is easy, and the unit is CSA certified. It suits both professionals and DIY users who carry out ventilation projects.

This 16" wall fan is built for ventilating agricultural buildings, moving 2685 CFM of air. Model AGI-905 pairs a 1/4 HP direct-drive motor with six plastic blades, so air moves steadily without belts or extra drive parts. The fan comes with a Triac controller and runs on 115/230 volts at 60 Hz. A black housing with a square mounting flange and a protective guard over the round outlet make the fan simple to install on a wall. CSA certified, it suits both professionals and DIY users who need dependable ventilation.

This LV4 self-locking galvanized gate is adjustable from 4 m to 5 m (13.12' to 16.4'), making it well suited for dairy farming applications. It features a two-section design — a back section and a front section — and opens from one end only, making it ideal for frequent daily openings. The 60 mm (2.36") tube construction provides solid durability, and the galvanized finish ensures long-term resistance to barn environments. Supplied complete with two spacer braces. Reliable and easy to operate for both professional livestock producers and farm managers.

This polypropylene runner rug combines decorative style with practical durability for high-traffic indoor areas. Its dense polypropylene pile resists daily wear and cleans easily, while the vinyl backing provides structural stability underfoot. It suits hallways, entryways, and transitional spaces where both appearance and resilience matter.

This LV4 self-locking galvanized gate is adjustable from 5 m to 6 m (16.4' to 19.7'), making it well suited for dairy farming applications. It features a two-section design — a back section and a front section — and opens from one end only, making it ideal for frequent daily openings. The 60 mm (2.36") tube construction provides solid durability, and the galvanized finish ensures long-term resistance to barn environments. Supplied complete with two spacer braces. Reliable and easy to operate for both professional livestock producers and farm managers.

This rubber stall mat roll provides a continuous, cushioned lying surface for dairy, young and fattening cattle in agricultural buildings. Supplied as a 72" x 39.4' mat about 1.2" (3 cm) thick, it bridges multiple stalls, pens and cubicles and creates an even, secure footing area. The underside honeycomb cushion profile and gently sloped rear edge help support the animals while promoting drainage and reducing moisture build-up. A rear chamfer limits trip edges and eases joints, while straight edges, sealing joints, pre-marked fixing points and a fine matte black top simplify installation and daily cleaning.

This LV4 self-locking galvanized gate is adjustable from 3 m to 4 m (9.84' to 13.12'), making it well suited for dairy farming applications. It features a two-section design — a back section and a front section — and opens from one end only, making it ideal for frequent daily openings. The 60 mm (2.36") tube construction provides solid durability, and the galvanized finish ensures long-term resistance to barn environments. Supplied complete with one spacer brace. Reliable and easy to operate for both professional livestock producers and farm managers.

Opt for this one-speed exhaust fan.

This LV4 self-locking galvanized gate is adjustable from 2 m to 3 m (6.56' to 9.84'), making it well suited for dairy farming applications. It features a two-section design — a back section and a front section — and opens from one end only, making it ideal for frequent daily openings. The 60 mm (2.36") tube construction provides solid durability, and the galvanized finish ensures long-term resistance to barn environments. Supplied complete with one spacer brace. Reliable and easy to operate for both professional livestock producers and farm managers.

Canarm SD24-F1 standard wall exhaust fan follows a tradition of quality in design, materials, and construction. All Canarm standard fans are developed to be efficient and economically priced. This 24-inch, single-speed fan uses an energy-efficient, 115-volt motor and blade combination. The motor is totally enclosed and thermally protected. The rugged, steel-welded box housing has a durable, powder-coated finish. Aluminum louver shutters are supported by long-life nylon bushings. This model has a heavy wire chrome plated OSHA guards on intake side of fan. This fan is shipped completely assembled.

This LV4 self-locking galvanized gate is adjustable from 1 m to 2 m (3.28' to 6.56'), making it well suited for dairy farming applications. It features a two-section design — a back section and a front section — and opens from one end only, making it ideal for frequent daily openings. The 60 mm (2.36") tube construction provides solid durability, and the galvanized finish ensures long-term resistance to barn environments. Supplied complete with one spacer brace. Reliable and easy to operate for both professional livestock producers and farm managers.

Canarm S18-F1 standard wall exhaust fan follows a tradition of quality in design, materials, and construction. All Canarm standard fans are developed to be efficient and economically priced. This 18-inch, single-speed fan uses an energy-efficient, 115-volt motor and blade combination. The motor is totally enclosed and thermally protected. The rugged, steel-welded box housing has a durable, powder-coated finish. Aluminum louver shutters are supported by long-life nylon bushings. This model has a heavy wire chrome plated OSHA guards on intake side of fan. This fan is shipped completely assembled.

This square steel post measures 4 in × 4 in × 88.58 in and comes pre-drilled for quick, precise bracket installation. It includes four screws sized for the Ecofix bracket system, eliminating the need for drilling on site. Its uniform square section and pre-positioned holes make it a reliable choice for fence, guard rail, or structural post applications.

Canarm S16-E1 standard wall exhaust fan follows a tradition of quality in design, materials, and construction. All Canarm standard fans are developed to be efficient and economically priced. This 16-inch, single-speed fan uses an energy-efficient, 115-volt motor and blade combination. The motor is totally enclosed and thermally protected. The rugged, steel-welded box housing has a durable, powder-coated finish. Aluminum louver shutters are supported by long-life nylon bushings. This model has a heavy wire chrome plated OSHA guards on intake side of fan. This fan is shipped completely assembled.

This plate-mounted end bracket is designed for use with the Fiabilis self-locking stanchion system. Mounted directly onto a base plate, it secures the end position of the stanchion assembly and maintains structural integrity of the installation. Suited for agricultural and livestock management applications where reliable, fixed anchoring is required.

CanarmS14-E1 standard wall exhaust fan follows a tradition of quality in design, materials, and construction. All Canarm standard fans are developed to be efficient and economically priced. This 14-inch, single-speed fan uses an energy-efficient, 115-volt motor and blade combination. The motor is totally enclosed and thermally protected. The rugged, steel-welded box housing has a durable, powder-coated finish. Aluminum louver shutters are supported by long-life nylon bushings. This model has a heavy wire chrome plated OSHA guards on intake side of fan. This fan is shipped completely assembled.

These anchor nails are perfect for rubber mats.

This Fiabilis self-locking brace is designed for use with ECOFIX fence post collars in agricultural and rural fencing applications. It locks securely into the collar without additional fasteners, stabilizing posts against lateral forces. Built for demanding outdoor conditions, it provides a reliable and repeatable bracing solution for livestock enclosures, field perimeters, and similar installations.

Canarm S12-E1 standard wall exhaust fan follows a tradition of quality in design, materials, and construction. All Canarm standard fans are developed to be efficient and economically priced. This 12-inch, single-speed fan uses an energy-efficient, 115-volt motor and blade combination. The motor is totally enclosed and thermally protected. The rugged, steel-welded box housing has a durable, powder-coated finish. Aluminum louver shutters are supported by long-life nylon bushings. This model has a heavy wire chrome plated OSHA guards on intake side of fan. This fan is shipped completely assembled.

Canarm S20-F1 standard wall exhaust fan follows a tradition of quality in design, materials, and construction. All Canarm standard fans are developed to be efficient and economically priced. This 20-inch, single-speed fan uses an energy-efficient, 115-volt motor and blade combination. The motor is totally enclosed and thermally protected. The rugged, steel-welded box housing has a durable, powder-coated finish. Aluminum louver shutters are supported by long-life nylon bushings. This model has a heavy wire chrome plated OSHA guards on intake side of fan. This fan is shipped completely assembled.

These anchor nails are perfect for rubber mats.

This reduced-end square front beam is a 6 m hot-dip galvanized steel tube measuring 60 mm per side with a standard 3 mm wall thickness. Designed for agricultural stall installations, it resists corrosion and withstands sustained animal pressure in barn environments. Its square tubular profile provides structural rigidity suited to two-stall configurations in livestock facilities.

These anchor nails are perfect for rubber mats.

This U-shaped beam cap bracket is designed to fit squarely over a 60 x 60 mm square front beam. Its two-sided wall configuration secures the beam from both flanks, providing a stable and precise connection point for structural assemblies. Well suited for agricultural, outdoor, or industrial framing applications where beam-to-post or beam-to-structure connections are required.

This individual cross clamp connects 90 mm and 70 mm square structural sections at perpendicular angles, serving as a key junction and adjustment component for cattle stall supporting frameworks. Its single-piece design integrates two distinct square-sleeve sizes to join two perpendicular structural members, making it an essential hardware element in bovine housing assembly.

This single shell clamp creates a secure mechanical connection between a 60 x 60 mm square front beam and a 60 mm diameter round stall-divider tube. Designed specifically for livestock stall partition assemblies, it bridges two different tube geometries within the same fastening point. One half of the shell conforms to the square beam profile, while the other grips the round tube. A threaded rod with hex nuts on both ends ensures firm, adjustable clamping. The galvanized metal construction resists the demanding conditions of agricultural environments. Suited for professional barn fitters and agricultural contractors.

This variable speed control temperature-based automatic control operates from 32 to 99°F (0 to 37°C). Provides one variable 0 to 10 VDC output. Equipped with one disconnect relay and one alarm relay. Three-second full-power start function. Six-foot temperature sensor, extendable to 500 feet. Three-character LED display. NEMA 4X enclosure rated for corrosion, water, and fire resistance. cCSAus approved.

This triple mounting clamp is designed for 76 mm diameter posts, providing three attachment points for securing rails, pipes, or fencing components to round posts. Its robust metal construction delivers reliable holding strength in structural and agricultural fencing applications. Suitable for use in fields, paddocks, and perimeter installations where multiple fastening points are required.

This double angle mounting clamp is designed for 76 mm diameter posts, providing a secure two-point angled connection point for structural or agricultural installations. Its dual-angle design accommodates perpendicular and angled configurations, making it well suited for fence systems, pergolas, signage supports, and farm infrastructure where rigid post-to-post or post-to-rail junctions are required.

This double mounting clamp is designed for securing fixtures or accessories to 76 mm diameter posts. Its dual-clamp design distributes load across two contact points for a stable, secure hold. Suited for agricultural, industrial, and outdoor structural applications where reliable post-mounted attachment is required.

This single mounting clamp is designed for securing brackets and accessories to 76 mm diameter round posts. Constructed from steel for lasting outdoor durability, it provides a firm, stable connection point for fencing, signage, or agricultural equipment. A practical solution for post-mounted installations in agricultural, commercial, or residential settings.

Disinfectant mat for use at entrances to stables vulnerable to disease. The sturdy, permeable upper material allows liquid to penetrate to the core. The impermeable material on the bottom and on the side prevents fluid loss.

This self-locking receiver is designed for use with an in-line latch, providing secure and automatic engagement when the latch is pushed into the housing. Manufactured from galvanized steel, the unit features slotted mounting holes on both the upper and lower flanges for easy alignment during installation. The profiled body includes integrated locking tabs that grip the latch in place. Well suited for agricultural building gates and feeding or watering aisle access points, this receiver offers reliable hands-free latching for frequent daily use.

Make a proper support for the door with this bracket for 33 track.

Disinfectant mat for use at entrances to stables vulnerable to disease. The sturdy, permeable upper material allows liquid to penetrate to the core. The impermeable material on the bottom and on the side prevents fluid loss.

This bracket will offer a strong support for your doors.

Get this plastic fan hood designed for standard fans.

Install a sliding door using this mounting bracket cart.

Stop your garage door smoothly with this cushioned door stop.

Get this plastic fan hood designed for standard fans.

For Heavy Duty Industrial/Commercial applications, Canarm/LFI’s “HVR” High Velocity Round Portable Fans circulate large volumes of air.

Get this light duty stay roller for your barn sliding door system.

Install this 470 flush pull on your sliding door.

Acquire this latch to be mortised into door and jamb.